Tech Inferno Fan Posted June 24, 2014 Share Posted June 24, 2014 HP Elitebook 6930P - [email protected] + GTX770/R9-280X at x1/x1.Opt/x1E/x214" Elitebook 6930P circa 2008Intel Core2Duo [email protected], AMD eGPU with 29% PCIe overclock, NVidia eGPU with 20% PCIe overclock 4GB RAMSoftware: Win7-64bit + Setup 1.30 for all AMD or NVidia-x2 implementations. NVidia 306.97 + modded INF to add GTX770 x1.Opt support.port layout as shown: wifi=port2, expresscard=port3, WWAN/PCIe=port4 (disabled by default by bios) iGPU: 4500MHDeGPU: GTX770 and R9 280Xadapter: PE4H 2.4a + EC2C. x2 mode requires an additional PM3N.PSU: ATXInstallationx1 NVidia: is plug and play. No Setup 1.x required, though can use it as shown. This is the simplest and least expensive way to go.x2 NVidia: requires Setup 1.x to switch port to x2, configuration as shownx1/x1E/x2 AMD: requires Setup 1.x to perform PCI compaction and switch port to x2, configuration as shown-x1 and shown-x2. Easiest way of getting x2 going is to wire up the mPCIe port, use Setup 1.30 to switch to x2 mode, then hotplug the powered eGPU into the expresscard slot. Hit F5 to detect it in x2 link mode.Note: Any x1E/x2 configuration sets port1=x2 and port3=x2. That means onboard wifi as part of port2 gets closed off. If wanting concurrent wifi with x2/x1E then need additional USB wifi.PerformanceBelow we evaluate x2 1.0 versus x1 1.0. In addition, AMD offers a x1E mode (port is x2, but only using one lane). For more comparative performance see the x1 2.0, x1.1Opt and x1 1.0 results at http://forum.techinferno.com/diy-e-gpu-projects/2747-%5Bguide%5D-12-dell-e6230-gtx660%40x1-2opt-hd7870%40x1-2-pe4l-ec060a-2-1b.html#post37197R9 280Xx2 1.0 : 3dmark06=16001, 3dmark11=9786, RE5=101.1x1E : 3dmark06=15851, 3dmark11=9230, RE5=99.4x1 1.0 : 3dmark06=15436, 3dmark11=8662, RE5=92.3GTX770 resultsx1E and x1 gives the same result meaning there is no x1E mode for newer NVidia series. x1.Opt with a 4500MHD iGPU requires downgrading to 306.97 driver as discussed at http://forum.techinferno.com/diy-e-gpu-projects/6253-t500-compat-q-4500mhd-optimus-ends-306-97whql.html#post85924 since newer drivers no longer engage the x1 pci-e compression. Notice the loss of 3dmark11 performance with the 340.43->306.97 downgrade.x2 1.0 : 3dmark06=10984, 3dmark11=9845, RE5=89.2x1.Opt : 3dmark06=15600, 3dmark11=8558, RE5=88.5x1 1.0 : 3dmark06=6706, 3dmark11=9100, RE5= 81.6ConclusionThe 6930P is an older platform that does suprisingly well with an eGPU attached. The best value solution being any x1-capable eGPU adapter (PE4L 1.5/2.1, EXP GDC), a NVidia Fermi/Keplar and the 306.97 driver. Acquiring a more pricey x2 capable eGPU adapter (PE4H 2.4, PE4C 2.x) providing immediate x1 performance plus upgradability to x2 if wanting more. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.