Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

flash to A05 didnt work fans were working on max speed then beeps for 50-60 times then shut down. Now still after turning on ist turning down in about 2-3 secounds.

anybody have any idea?

Share this post


Link to post
Share on other sites

Guys, i need some advice.....

 

Several days before, i just lost my laptop display after repasting My GPU card process. I manage to get it back using removal of CMOS Battery process, and put it back. But now, the BIOS got back into it's default settings and I got problem everytime I went to switch the BIOS setting for set the primary display to PEG and for disabling the internal on board graphic setting. The screen go back to dark after I save the setting. Does that mean my 680m card have faulty since the display on my screen is always gone everytime I set that card as primary ?

Share this post


Link to post
Share on other sites
45 minutes ago, B4n6k3 said:

Guys, i need some advice.....

 

Several days before, i just lost my laptop display after repasting My GPU card process. I manage to get it back using removal of CMOS Battery process, and put it back. But now, the BIOS got back into it's default settings and I got problem everytime I went to switch the BIOS setting for set the primary display to PEG and for disabling the internal on board graphic setting. The screen go back to dark after I save the setting. Does that mean my 680m card have faulty since the display on my screen is always gone everytime I set that card as primary ?

Yes, that is a good possibility. If it only began happening after repaste, try taking the GPU out of the socket, blow out any dust or lint in the MXM slot and reseat the GPU. If you're lucky it may just be a bad connection in the MXM slot.

Share this post


Link to post
Share on other sites
On 1/4/2017 at 11:55 PM, Mr. Fox said:

Yes, that is a good possibility. If it only began happening after repaste, try taking the GPU out of the socket, blow out any dust or lint in the MXM slot and reseat the GPU. If you're lucky it may just be a bad connection in the MXM slot.

 

Mr.Fox, thanks for the reply.

 

Try to do seat/reseating several times. Still the same problem. I will try to clean the GPU connector and MXM slot right now. Just still waiting about my compressed air can I ordered to arrive. Just two question mr.Fox, Any side effect to my system if I'm not switch back to PEG or disable the on board GPU ? or maybe I'm missing some feature ? I don't like using Optimus either, but seems like now I don't have a choice. And the 2nd question, Any tips about how to properly cleaning the golden GPU connector and the MXM slot ? I read quiet a lot of horror story about how fragile those parts is, how it's easy to bent,etc..etc... Beside, it's my first time doing this stuff, so any help is really appreciated.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Just use compressed air to blow out dust. That should generally be sufficient. If it is really extraordinarily filthy you can use electronics contact cleaner (spray can). I've never needed to use electronics cleaning spray on a computer.

 

 

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
Hahaha, don't worry man!! [emoji3] It's all readable, that's more than enough, cheers!!


Where are you@svl7, hope that you are doing well. I'll never forget that 2 years ago your vbios that makes my P570WM with 780's working better and more efficient. Thank you again. Wish you all the best.

Share this post


Link to post
Share on other sites

Before I do anything stupid, Is the unlocker good for an Aurora R4? the unlocker says that it's for m18Xr2 so i'm not sure. thanks

 

Share this post


Link to post
Share on other sites

can i use this also on an M17 R3 because im getting thermal throttling and stuttering while playing im using a cooling pad to temps are 84C at there highest..

Share this post


Link to post
Share on other sites

seems the ol m17x is holding on huh. new here after picking up one for $100 in mint condition aside from the dead vid card, looking to grab the unlocked bios but i cant :/

Share this post


Link to post
Share on other sites

I have a query about the thermal options. Are the fan settings for the CPU only? I installed this modded bios in the hope I can reduce my GPU fan speed without forcing the CPU fan speed down too. My GPU sits at 66c, were the GPU fan goes full throttle (installed a new 80W GPU). What do the options for TC1, TC2 and TSP do? I have used HWinfo to control the fans but it can only control both fans at once. 

Share this post


Link to post
Share on other sites

Sorry, how i don't understand the part how to put modified bios on pendrive

Share this post


Link to post
Share on other sites

How to download it ?  

Error code: 2C171/1

 

i keep receiving this error 

 

#ok, its working now.

Edited by azshalsa

Share this post


Link to post
Share on other sites

Were can I find bios a11 unlocked and program to fix it on my m17x r4

 

thank you

Or any other bios unlocked 

iv got grey arean on my bios

 

why do i have grey areas on my bios and cant lock it up?

Share this post


Link to post
Share on other sites
On 2017-05-28 at 9:00 PM, Smergubben said:

Were can I find bios a11 unlocked and program to fix it on my m17x r4

 

thank you

Or any other bios unlocked 

iv got grey arean on my bios

 

why do i have grey areas on my bios and cant lock it up?

 

Did you mange to fix the grey areas?

iv got grey areas :(

Share this post


Link to post
Share on other sites

So I make a usb in rufus and then put the a11 unlocked files in there?

 

when i restart and boot. This happends

 

 

IMG_0882.PNG

Edited by Smergubben

Share this post


Link to post
Share on other sites

Im doin something wrong :( 

Iv read the guid but no luck

IMG_0890.JPG

The prr2 starts but not the flash 

i wrote flash and get the info : bad command or filename

 

im noob so i want to learn

IMG_0889.PNG

Share this post


Link to post
Share on other sites

Do you have all files you need copied to the usb? I think not.

You have to prepare the usb and then copy all necessary files to it, not only the bios.bin.

Share this post


Link to post
Share on other sites

 

2 hours ago, Zoldago said:

Do you have all files you need copied to the usb? I think not.

You have to prepare the usb and then copy all necessary files to it, not only the bios.bin.

 

2 hours ago, Zoldago said:

Do you have all files you need copied to the usb? I think not.

You have to prepare the usb and then copy all necessary files to it, not only the bios.bin.

The prr2 starts but not the flash 

i wrote flash and get the info : bad command or filename

 

im noob so i want to learn

 

 

My usb looks like this :)

IMG_0900.JPG

Share this post


Link to post
Share on other sites

Plus the prr2 iv put on the usb

3 hours ago, Zoldago said:

Do you have all files you need copied to the usb? I think not.

You have to prepare the usb and then copy all necessary files to it, not only the bios.bin.

 

3 hours ago, Zoldago said:

Do you have all files you need copied to the usb? I think not.

You have to prepare the usb and then copy all necessary files to it, not only the bios.bin.

The prr2 starts but not the flash 

i wrote flash and get the info : bad command or filename

 

im noob so i want to learn

Share this post


Link to post
Share on other sites
Quote

Download a '[FPT]' labeled version of the unlocked BIOS. Put the DOS version of the flash tool on the root of the prepared USB stick (fpt.exe and fparts.txt), along with the prr.exe and the file you want to flash (plus the included flash.bat). .

  • Restart the system and boot from your USB stick. Run prr.exe, then flash the bios by executing the flash.bat file. Wait until the tool completes the flash. If the verification is okay, reboot, else flash again..

Where is the fpt.exe, fparts.txt and prr.exe?

 

edit: if you want to learn you have to learn reading the instructions first :36_002:

edit 2: and if you dont know how to flash your bios I'm afraid you'll break your motherboard by making bad settings

Edited by Zoldago

Share this post


Link to post
Share on other sites

Im trying to read and understand

were can i find

41 minutes ago, Zoldago said:

fpt.exe, fparts.txt

 

Trying 

but i will try again :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad X250, X260.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
      Important!
      For creating your personal bios dump and to flash your bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/itm/USB-Programmer-CH341A-Series-Burner-Chip-24-EEPROM-BIOS-Writer-25-SPI-Flash-AU/153117073868?epid=577511738&hash=item23a67d21cc:g:XKEAAOSw5UdbW-iL
       
      https://www.amazon.com/Parts-tower-CH341A-Programmer-Software/dp/B01FVVHCVC/ref=sr_1_4?ie=UTF8&qid=1522179315&sr=8-4&keywords=ch341a&dpID=51BO7eGgO5L&preST=_SY300_QL70_&dpSrc=srch
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/MAUSAN-Socket-Adapter-150MIL-205MIL/dp/B06ZYSNJF3/ref=pd_sbs_21_3?_encoding=UTF8&psc=1&refRID=XM79QJWGED6B4K2VEZDJ
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
       
      Note: 
      Each bios mod prepare personally and based on your personal bios dump which contain your personal data like Serial numbers, UUID, Service TAG, MAC addresses, Windows keys, NVRAM settings, etc.
      For creating your personal bios dump and to flash bios mod, you need use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
      Just dump your Bios (from your laptop) using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad T440p / T440s / T540p.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
      Important!
      For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       


    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad T450s.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or already upgraded Display and after that can't adjust screen brightness, then you can post your request in this thread.
      Important!
      For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/itm/USB-Programmer-CH341A-Series-Burner-Chip-24-EEPROM-BIOS-Writer-25-SPI-Flash-AU/153117073868?epid=577511738&hash=item23a67d21cc:g:XKEAAOSw5UdbW-iL
       
      https://www.amazon.com/Parts-tower-CH341A-Programmer-Software/dp/B01FVVHCVC/ref=sr_1_4?ie=UTF8&qid=1522179315&sr=8-4&keywords=ch341a&dpID=51BO7eGgO5L&preST=_SY300_QL70_&dpSrc=srch
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/MAUSAN-Socket-Adapter-150MIL-205MIL/dp/B06ZYSNJF3/ref=pd_sbs_21_3?_encoding=UTF8&psc=1&refRID=XM79QJWGED6B4K2VEZDJ
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
       
    • By svl7
      As it got pretty difficult for me to keep track of all the mod requests I decided to make a separate thread for bios / vbios modification requests. I hope it will make it easier for me to fulfill as many requests as possible.
      If you want to request a mod make sure you read through the following guidelines / rules, posts that do not comply with them will be deleted without further notice.
      Rules:
      You need to have a minimum of five approved posts (or 'T|I elite' status) in order to request a mod. Make sure I didn't already modify the corresponding bios / vbios. When posting a request you agree to flash and test the mod once it's done and post some feedback. (If you don't plan on using the mod then don't bother posting.) I only modify stock firmware. I don't work on anything that has already been tampered with.
      . For BIOS mods I need a link to an original BIOS update directly from the vendor (no mirror link) and most likely a dump of your BIOS (see instructions below).
      I only work on the latest BIOS versions unless there's a very specific reason for using an older one (in this case you need to specify so).
      In addition to this I need a dump of your BIOS as well as some additional information, read the "BIOS backup" section below, provide all the specified files.
      . For VBIOS mods I need a copy of your original vbios. (Only as attachment in a post here or per link to cloud storage such as dropbox, gdrive etc. per PM, filehosters are not accepted). No custom GPU clock requests unless it is for some reason not possible to overclock the corresponding system / GPU per software. No Windows activation mods. Check MDL for this kind of request. I can't guarantee that I will be able to fulfill a request.
      While I will try to keep it fair and consider the order of the requests at least up to a certain degree I will generally work on what I want and feel up to. Popular requests might be treated with higher priority.
      BIOS backup:
      For Intel 7 series chipsets run the attached flashChk tool from DOS and post the created flashchk.bin file (as attachment).
      Also grab this tool, run the backup.bat and send me created file. You will need to run it as administrator. If it reports and issue with the PCIe driver you have a crappy AV software and need to disable it temporarily.
      If you don't use Windows let me know and I will provide a different tool.
      For systems using the 8 series chipsets run the attached flashChk tool from DOS and post the created flashchk.bin file (as attachment) and wait for further instructions.
      - Thread under construction, more information will be added -
      flashChk.zip
      Fptw64_(8_series).zip
      Fpt_DOS_(8_series).zip
    • By Klem
      In this thread you can post your requests for Lenovo Y50-70, Lenovo Y70-70, Lenovo Z50-70, Lenovo Z70-70, Lenovo G50-70, Lenovo G70-70.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or unlocked vbios for overclock NVIDIA card, then you can post your request in this thread. Also, if you have a problem with fan pulsating/clicking on any modified bios then you can post your request in this thread.
       
      The flashing procedure include two steps:
      1.  Flash main system bios.
      2.  Flash EC firmware.
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.