Jump to content
EwinRacing Flash Series Gaming Chairs
svl7

NVIDIA Kepler VBIOS mods - Overclocking Editions, modified clocks, voltage tweaks

Recommended Posts

sorry for my English!) guys help me to overclock your video card 780m notebook AW17 R4 is svl7 BIOS! put the core clock +100 and +300 start playing increase fps +7-8 in the Witcher 3! but the frequency drops from 950 to 405 when heated card 67 degrees

Share this post


Link to post
Share on other sites

sorry for my English!) guys help me to overclock your video card 780m notebook AW17 R4 is svl7 BIOS! put the core clock +100 and +300 start playing increase fps +7-8 in the Witcher 3! but the frequency drops from 950 to 405 when heated card 67 degrees

Share this post


Link to post
Share on other sites

Hello

I have a Dell Quadro K5000M in a MSI GT70 Haswell MS-1763,i can install Driver mith modified INF.

In Device Manager,GPUZ and MSI Afterburner is all OK,but i can`t start 3Dmark or other Benchmarks.

It is possible to Change the Subvendor ID and delete the 135MHz Barrier that i can try to install the Driver with this ID.

Maybe this is working then.

K5000M.zip

Share this post


Link to post
Share on other sites

Hi,

I have a P370SM3 with a 780m stock clocks and stock vBios. When under load (gaming) the card will regularly hit the 92-93 deg C mark then the fans will start to spin faster to cool the card down. I'm reading on this forum that the temps should stay below 80 deg. Is this still the case for a laptop? If so, is this normal behavior for stock clocks and vbios or should I investigate a repaste job or look for updated EC/mainboard bios to help with fan speed control?

Also, would the vBios linked in the first few posts help in this case?

Thanks.

Share this post


Link to post
Share on other sites

Can someone please help me modify my vBios for my ASUS GTX 880M? It will not work with the other Dell/MSI/Clevo vBios ROM's since they are all 8GB, where as my card is 4GB. I'm looking for the same features, but for whatever reason Kepler Bios Editor will not do anything that can actually change the voltage or TDP at all. I'm able to do +300 on the memory out of the box and sadly, only +80 on the core. Nvidia Inspector cannot change the Vcore offset for whatever reason but it claims I have 250mV +/- to choose from.

I'm using the v7 vBios from ASUS, here is the same one I have installed currently.

https://mega.nz/#!SocxFZrJ!t8emFpv1MEc7GaXlMvN5hU5dInYgdbFXm0xjBvIRtgI

Thank you.

Share this post


Link to post
Share on other sites
Can someone please help me modify my vBios for my ASUS GTX 880M? It will not work with the other Dell/MSI/Clevo vBios ROM's since they are all 8GB, where as my card is 4GB. I'm looking for the same features, but for whatever reason Kepler Bios Editor will not do anything that can actually change the voltage or TDP at all. I'm able to do +300 on the memory out of the box and sadly, only +80 on the core. Nvidia Inspector cannot change the Vcore offset for whatever reason but it claims I have 250mV +/- to choose from.

I'm using the v7 vBios from ASUS, here is the same one I have installed currently.

https://mega.nz/#!SocxFZrJ!t8emFpv1MEc7GaXlMvN5hU5dInYgdbFXm

Thank you.

This is for you.

ASUSGTX880M_new.zip

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

got a new motherboard, integrated graphics works and i was able to reflash one of my gpu's but the other one nvflash can't find. Any suggestions?

Share this post


Link to post
Share on other sites

How much increase in performance should I expect from OCing GTX 880M SLI? What is the maximum safe voltage?

Share this post


Link to post
Share on other sites

Hi Klem,

is it possible that you can create an OC VBIOS for MSI GTX780M 4GB ? You had me at the time of my old GTX870M 3GB created, which was perfect! I Had the opportunity to swap the graphics cards for free: D

GPU-Z Screen:

post-15583-14495000721779_thumb.gif

Below the original MSI VIOS.

Many thx !

780m.zip

Share this post


Link to post
Share on other sites

Hi guys, new user here :)

I was wondering if anyone has HP quadro K5000M VBIOS for 8760w (stock or OC, I have to blind flash a Dell K5000m from M6700 to work in my HP 8760w )?

Thanks !

Share this post


Link to post
Share on other sites

I have a 880m 8gig, with the modded vbios from here, was wondering if anyone could give me some help with Nvidia Inspector and setting a permanent Pstate? Thank you :)

*Edit* I run with Diablo 3 for testing but i always seem to be STUCK! with Pstate 1. On Top of it I run "Steam Homeworld remastered and am STUCK! with Pstate 8 (lowest power state)

ANY HELP would be greatly appreciate! :)

Share this post


Link to post
Share on other sites

Which tool is used to remove the +135MHz limit? I'm using one of the BIOS files from the first page, but it was unlocked by svl7 and he doesn't seem to frequent the forums much anymore. The problem is that I'd like to switch to UEFI for Win 10 upgrade, but my vBIOS doesn't support it. I got an UEFI supported version, but it's locked as it is stock. Thanks in advance.

Share this post


Link to post
Share on other sites

I have a asus GW771JM ROG laptop with the GeForce GTX 660m Maxwell GPU . I would love to get a bit of a boost but am unsure of which vbios update will work with my machine . any help would be greatly appreciated . when I installed NVidia inspector the voltages do not seem to be locked . is this normal in the newer models and does it mean I do not need a custom vbios ? thanks for any advise in advance .

Share this post


Link to post
Share on other sites

Hi Guys, could someone modify the BIOS for the 860M to work with my Alienware Alpha? I've attached you my log from NVFLASH for reference:

Help would be much appriciated :)



c:\Users\Darius\Desktop\nvflash_5.218.0.1-win\x64>nvflash.exe -b backup_vbios.rom






NVIDIA Firmware Update Utility (Version 5.218)
Simplified Version For OEM Only


Adapter: GeForce GTX 860M (10DE,1392,1028,066A) H:--:NRM S:00,B:01,PCI,D:00,
F:00


The display may go *BLANK* on and off for up to 10 seconds during access to the
EEPROM depending on your display adapter and output device.


Identifying EEPROM...
EEPROM ID (C2,2012) : MX MX25L2005 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1468 bytes
IFR CRC32 : 6B6A5280
IFR Image Size : 1536 bytes
IFR Image CRC32 : 44544B48
IFR Subsystem ID : 1028-066A
Image Size : 173056 bytes
Version : 82.07.32.40.78
~CRC32 : 59E8E057
Image Hash : 2D94EC00AE51342B0EE406D230D3CFA7
Subsystem ID : 1028-066A
Hierarchy ID : Normal Board
Chip SKU : 670-0
Project : 2704-0011
CDP : N/A
Build Date : 02/03/14
Modification Date : 08/04/14
UEFI Support : Yes
UEFI Version : 0x1002A (Jan 20 2014 @ 17684658 )
UEFI Variant Id : 0x0000000000000005 ( GM1XX )
UEFI Signer(s) : Microsoft Corporation UEFI CA 2011
Saving of image completed.












c:\Users\Darius\Desktop\nvflash_5.218.0.1-win\x64>nvflash.exe -6 "Nvidia GTX 860
m (Kepler) - 'OC edition' rev00.rom"


NVIDIA Firmware Update Utility (Version 5.218)
Simplified Version For OEM Only


Checking for matches between display adapter(s) and image(s)...


Adapter: GeForce GTX 860M (10DE,1392,1028,066A) H:--:NRM S:00,B:01,PCI,D:00,
F:00


WARNING: None of the firmware image compatible PCI Device ID's
match the PCI Device ID of the adapter.
Adapter PCI Device ID: 1392
Firmware image PCI Device ID: 119A
WARNING: Firmware image PCI Subsystem ID (1028.05AA)
does not match adapter PCI Subsystem ID (1028.066A).
WARNING: None of the firmware image compatible Board ID's
match the Board ID of the adapter.
Adapter Board ID: E70A
Firmware image Board ID: E138


ERROR: GPU mismatch














c:\Users\Darius\Desktop\nvflash_5.218.0.1-win\x64>nvflash.exe -version


NVIDIA Firmware Update Utility (Version 5.218)
Simplified Version For OEM Only


Adapter: GeForce GTX 860M (10DE,1392,1028,066A) H:--:NRM S:00,B:01,PCI,D:00,
F:00


The display may go *BLANK* on and off for up to 10 seconds during access to the
EEPROM depending on your display adapter and output device.


Identifying EEPROM...
EEPROM ID (C2,2012) : MX MX25L2005 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1468 bytes
IFR CRC32 : 6B6A5280
IFR Image Size : 1536 bytes
IFR Image CRC32 : 44544B48
IFR Subsystem ID : 1028-066A
Image Size : 173056 bytes
Version : 82.07.32.40.78
~CRC32 : 59E8E057
Image Hash : 2D94EC00AE51342B0EE406D230D3CFA7
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GM107 Board - 27040011
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 860M
Board ID : E70A
PCI ID : 10DE-1392
Subsystem ID : 1028-066A
Hierarchy ID : Normal Board
Chip SKU : 670-0
Project : 2704-0011
CDP : N/A
Build Date : 02/03/14
Modification Date : 08/04/14
UEFI Support : Yes
UEFI Version : 0x1002A (Jan 20 2014 @ 17684658 )
UEFI Variant Id : 0x0000000000000005 ( GM1XX )
UEFI Signer(s) : Microsoft Corporation UEFI CA 2011
Sign-On Message : GM107 E2704 SKU 11 VGA BIOS (HWDIAG)












c:\Users\Darius\Desktop\nvflash_5.218.0.1-win\x64>nvflash.exe -6 "Nvidia GTX 860m (Kepler) - 'OC edition' rev00.rom"


NVIDIA Firmware Update Utility (Version 5.218)
Simplified Version For OEM Only


Checking for matches between display adapter(s) and image(s)...


Adapter: GeForce GTX 860M (10DE,1392,1028,066A) H:--:NRM S:00,B:01,PCI,D:00,
F:00


WARNING: None of the firmware image compatible PCI Device ID's
match the PCI Device ID of the adapter.
Adapter PCI Device ID: 1392
Firmware image PCI Device ID: 119A
WARNING: Firmware image PCI Subsystem ID (1028.05AA)
does not match adapter PCI Subsystem ID (1028.066A).
WARNING: None of the firmware image compatible Board ID's
match the Board ID of the adapter.
Adapter Board ID: E70A
Firmware image Board ID: E138


ERROR: GPU mismatch

Share this post


Link to post
Share on other sites
Hi Guys, could someone modify the BIOS for the 860M to work with my Alienware Alpha? I've attached you my log from NVFLASH for reference:

Help would be much appriciated :)



c:\Users\Darius\Desktop\nvflash_5.218.0.1-win\x64>nvflash.exe -b backup_vbios.rom






NVIDIA Firmware Update Utility (Version 5.218)
Simplified Version For OEM Only


Adapter: GeForce GTX 860M (10DE,1392,1028,066A) H:--:NRM S:00,B:01,PCI,D:00,
F:00


The display may go *BLANK* on and off for up to 10 seconds during access to the
EEPROM depending on your display adapter and output device.


Identifying EEPROM...
EEPROM ID (C2,2012) : MX MX25L2005 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1468 bytes
IFR CRC32 : 6B6A5280
IFR Image Size : 1536 bytes
IFR Image CRC32 : 44544B48
IFR Subsystem ID : 1028-066A
Image Size : 173056 bytes
Version : 82.07.32.40.78
~CRC32 : 59E8E057
Image Hash : 2D94EC00AE51342B0EE406D230D3CFA7
Subsystem ID : 1028-066A
Hierarchy ID : Normal Board
Chip SKU : 670-0
Project : 2704-0011
CDP : N/A
Build Date : 02/03/14
Modification Date : 08/04/14
UEFI Support : Yes
UEFI Version : 0x1002A (Jan 20 2014 @ 17684658 )
UEFI Variant Id : 0x0000000000000005 ( GM1XX )
UEFI Signer(s) : Microsoft Corporation UEFI CA 2011
Saving of image completed.












c:\Users\Darius\Desktop\nvflash_5.218.0.1-win\x64>nvflash.exe -6 "Nvidia GTX 860
m (Kepler) - 'OC edition' rev00.rom"


NVIDIA Firmware Update Utility (Version 5.218)
Simplified Version For OEM Only


Checking for matches between display adapter(s) and image(s)...


Adapter: GeForce GTX 860M (10DE,1392,1028,066A) H:--:NRM S:00,B:01,PCI,D:00,
F:00


WARNING: None of the firmware image compatible PCI Device ID's
match the PCI Device ID of the adapter.
Adapter PCI Device ID: 1392
Firmware image PCI Device ID: 119A
WARNING: Firmware image PCI Subsystem ID (1028.05AA)
does not match adapter PCI Subsystem ID (1028.066A).
WARNING: None of the firmware image compatible Board ID's
match the Board ID of the adapter.
Adapter Board ID: E70A
Firmware image Board ID: E138


ERROR: GPU mismatch














c:\Users\Darius\Desktop\nvflash_5.218.0.1-win\x64>nvflash.exe -version


NVIDIA Firmware Update Utility (Version 5.218)
Simplified Version For OEM Only


Adapter: GeForce GTX 860M (10DE,1392,1028,066A) H:--:NRM S:00,B:01,PCI,D:00,
F:00


The display may go *BLANK* on and off for up to 10 seconds during access to the
EEPROM depending on your display adapter and output device.


Identifying EEPROM...
EEPROM ID (C2,2012) : MX MX25L2005 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1468 bytes
IFR CRC32 : 6B6A5280
IFR Image Size : 1536 bytes
IFR Image CRC32 : 44544B48
IFR Subsystem ID : 1028-066A
Image Size : 173056 bytes
Version : 82.07.32.40.78
~CRC32 : 59E8E057
Image Hash : 2D94EC00AE51342B0EE406D230D3CFA7
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GM107 Board - 27040011
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 860M
Board ID : E70A
PCI ID : 10DE-1392
Subsystem ID : 1028-066A
Hierarchy ID : Normal Board
Chip SKU : 670-0
Project : 2704-0011
CDP : N/A
Build Date : 02/03/14
Modification Date : 08/04/14
UEFI Support : Yes
UEFI Version : 0x1002A (Jan 20 2014 @ 17684658 )
UEFI Variant Id : 0x0000000000000005 ( GM1XX )
UEFI Signer(s) : Microsoft Corporation UEFI CA 2011
Sign-On Message : GM107 E2704 SKU 11 VGA BIOS (HWDIAG)












c:\Users\Darius\Desktop\nvflash_5.218.0.1-win\x64>nvflash.exe -6 "Nvidia GTX 860m (Kepler) - 'OC edition' rev00.rom"


NVIDIA Firmware Update Utility (Version 5.218)
Simplified Version For OEM Only


Checking for matches between display adapter(s) and image(s)...


Adapter: GeForce GTX 860M (10DE,1392,1028,066A) H:--:NRM S:00,B:01,PCI,D:00,
F:00


WARNING: None of the firmware image compatible PCI Device ID's
match the PCI Device ID of the adapter.
Adapter PCI Device ID: 1392
Firmware image PCI Device ID: 119A
WARNING: Firmware image PCI Subsystem ID (1028.05AA)
does not match adapter PCI Subsystem ID (1028.066A).
WARNING: None of the firmware image compatible Board ID's
match the Board ID of the adapter.
Adapter Board ID: E70A
Firmware image Board ID: E138


ERROR: GPU mismatch

In your log we can see that you try flash in GTX 860M Maxwell, vbios from GTX 860M Kepler. This is mistake. Different cards with different architectures.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
Hi, can anybody unlock the software OC limit on this Dell K4000M vBIOS? I want to upgrade to Windows 10, but wouzld like to use UEFI boot and it doesn't work with my current unlocked vBIOS (not UEFI compatible for some reason).

TinyUpload.com - best file hosting solution, with no limits, totaly free

Software OC limit +135 is unlocked.

K4000M-GK104-80.04.5A.00.02.zip

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Hello

Could you also unlock the K4100M Vbios for me?

I tried Kepler Tweaker with 800MHz and 135MHz overclock with MSI Afterburner,but 3Dmark don`t use this.

GPUZ Shows 935MHz but I don`t get more Points.

K4100M.zip

Share this post


Link to post
Share on other sites
Hello

Could you also unlock the K4100M Vbios for me?

I tried Kepler Tweaker with 800MHz and 135MHz overclock with MSI Afterburner,but 3Dmark don`t use this.

GPUZ Shows 935MHz but I don`t get more Points.

[ATTACH]15961[/ATTACH]

Done.

K4100M.zip

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Dr_Cachetes
      Hello everyone, it is 2020 and i've been looking literally EVERYWHERE for a modded vBios for an Asus G751jy (980m 4gb) to unlock voltage control above 25mV, can someone help me?
      I've seen people have been linking the mod so here's mine, latest 213
      GM204.rom
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       
    • By GrayCryptoSpordium
      Well everyone...I have a confession to make-I flashed svl7 modified 970m vbios before I wiped my drivers! Everything seemed to run fine, I could game but noticed my clocks fluctuating a bit crazy. Figured I'd try a OC profile in afterburner while running a 27 27 26 26 clock in TS a bit stupid I know. Well 3d mark froze so I did a reboot...Black Screen on startup I heard windows boot so I feared I bricked my card. Tried external monitor..works fine. This is where my stupidity really hit the cosmos. I had another m15x 900p LCD laying around plugged that in. Worked fine back too overclocking bro! Well same thing happened. My profile was not overly crazy as I can remember. But I bricked another screen. Plugged in external monitor everything fine. I was using latest nvidia drivers 436.48 I believe. So I wiped drivers using DDU. Reflashed to stock clevo bios. Tried both LCD again still nothing. Installed old 7970m still nothing. Cleared CMos again nope. Reinstalled 970m with svl7 vbios with newest driver and been gaming on my external monitor. Have done some OC with inspector. Everything seems to work as it should. Temps and performance are great. Did I brick my monitors??? Never heard of this problem. 
    • By Axel de S
      Hello guys,
      I have a GT72VR 6RE with G-sync MSI Laptop. Sadly the GPU is partially dead (artefacts all over the screen, crashes, windows detecting a damaged hardware etc...).

      So I bought an other GTX1070 MXM on ebay, which was used in a Vortex G65 6RE before.
      Sadly, when I plug the new GPU in the laptop, the laptop screen stays completly off, but i can use the HDMI port. So i though that I would just have to flash the vbios to the one I was using on the GPU that died, but I couldn't because of a mismatch betwen the PCI Device ID.
      The new GPU ID is : 10DE 1BA1 - 1462 11AF and the previous GPU ID was :10DE 1BE1 - 1462 11AF
      Pretty close right? but the A1 and E1 variation are fcking everything up. I've read that 1BA1 is for non G-sync and 1BE1 is for G-sync. I've also read that the G-sync variation is not part of the card but is an external part no on the GPU board.

      So now I'm wondering what can I do : is there a way to force the vbios flash or to change the PCI ID ? I really need some help here. I'm no expert and I've try as much as I could. Maybe I need to do some vbios editing but I don't really know how to do it and what to do exactly to make this work.

      Thank you very much for your help guys
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.