Riri-Fifi Posted June 28, 2013 Share Posted June 28, 2013 Teaser:Coming soon to a mobile Kepler GPU in your notebook... let me present you - full control: [ATTACH=CONFIG]7935[/ATTACH] If don't notice anything, check the Nvidia Inspector... Edit: Ah yeah, btw, that's on my M15x Hello Very very good Impressive Quote Link to comment Share on other sites More sharing options...
Robbo Posted June 28, 2013 Share Posted June 28, 2013 Wow, looking forward to being able to control all those voltages & other variables on the fly with NVInspector on my 670MX 3GB, well done svl7! :-) Quote Link to comment Share on other sites More sharing options...
svl7 Posted June 28, 2013 Author Share Posted June 28, 2013 Oh, so now it should work!LOL You owe me 3 sodas now! Hahaha, only the voltage slider Quote Link to comment Share on other sites More sharing options...
Guest Posted June 28, 2013 Share Posted June 28, 2013 Hahaha, only the voltage slider Well the 100%+ slider doesn't look that stock to me either. Quote Link to comment Share on other sites More sharing options...
svl7 Posted June 28, 2013 Author Share Posted June 28, 2013 Yeah, you're right, it isn't What I meant is that on the 680m only the volt slider will work, at least in most cases. 1 Quote Link to comment Share on other sites More sharing options...
Robbo Posted June 28, 2013 Share Posted June 28, 2013 svl7 (or anybody else), I'm using the software unlocked vBIOS available in this forum & I've been noticing some interesting behaviour of my cards voltage when at full load. Normally while at full load the card operates at 0.925V, but every so often, sometimes for extended periods of time, it will drop to 0.9V (while still operating at the same frequencies). I don't think it's a problem, apart from my slight concern that it might make overclocks unstable, but I'm more curious as to why it's doing this. Anybody? I did read in another forum that someone thought it was related to the cards temperature, and initially I thought it was dropping the voltage when it got to 61degC, but sometimes it'll just go ahead and operate at 0.925V even at 63degC. Maybe there's more than one variable that controls the voltage? Quote Link to comment Share on other sites More sharing options...
widezu69 Posted June 28, 2013 Share Posted June 28, 2013 Teaser:Coming soon to a mobile Kepler GPU in your notebook... let me present you - full control: [ATTACH=CONFIG]7935[/ATTACH] If don't notice anything, check the Nvidia Inspector... Edit: Ah yeah, btw, that's on my M15x Hey that's truly impressive, forever closing the gap between mobile and desktop cards. I have hypothetical, does the GPU ramping up work 100% meaning is it possible to crank voltage and power target up to max (or quite high), set a temperature limit and have the card overclock itself? If it is the case I'm definitely getting one. Quote Link to comment Share on other sites More sharing options...
svl7 Posted June 30, 2013 Author Share Posted June 30, 2013 It's a pleasure to announce that after all the teasing we finally release the modified vbios for the Nvidia GTX 780m. This is a result of a close collaboration between @johnksss and myself. There's a lot effort and many hours of work and testing behind this, and the result is a vbios which will allow you to release the power of the GK104 chip on that card. To put it in numbers, you can now break 10k GPU score in 3dMark11 without any hardmods or extreme auxiliary cooling. Also an very big thank you @chiefule for sending me his card just so I could mess with it!! That's just hella awesome!! Really appreciate it! Without this there would most likely be no slider control. You can grab the vbios at the end of the second post of this thread. I recommend being reasonable when using those sliders, you have been warned. Flash and use at your own risk. 17 Quote Link to comment Share on other sites More sharing options...
johnksss Posted June 30, 2013 Share Posted June 30, 2013 Indeed! This was a very fun project to say the the least. Now lets see if anyone can really unlock the power of their cards!! Have fun and know that team us (svl7 & me) were first. 7 Quote Link to comment Share on other sites More sharing options...
Founder Brian Posted June 30, 2013 Founder Share Posted June 30, 2013 Thanks to @svl7 and @johnksss for the hard work on the vbios. And thanks to reborn for sending the card to marco to help the community. Good job everyone and here's a front page post with the announcement: Unlocked NVIDIA GTX 780M VBIOS - Tech|Inferno | Tech|Inferno 1 Quote Link to comment Share on other sites More sharing options...
Red Line Posted June 30, 2013 Share Posted June 30, 2013 tnx for the hard work, guys! Also, can you confirm if the modified vbios is universal for all brands or Dell specific? Quote Link to comment Share on other sites More sharing options...
LeonoeL Posted June 30, 2013 Share Posted June 30, 2013 is that right, that the GTX780m did not work with 3D-Vision on M17x R4 120 Hz Display. See eBay link ALIENWARE M17x M18x VGA Upgrade Kit; NEW NVIDIA GTX 780M; 4GB DDR5; MXM 3.0b | eBay Quote Link to comment Share on other sites More sharing options...
svl7 Posted June 30, 2013 Author Share Posted June 30, 2013 Im sure it works just fine with the R4, eurocom is just too stupid to get it to work. 3d most likely won't work though. Quote Link to comment Share on other sites More sharing options...
Riri-Fifi Posted June 30, 2013 Share Posted June 30, 2013 HelloThanks to @svl7 and @johnksss Vbios Je fait les teste Quote Link to comment Share on other sites More sharing options...
LeonoeL Posted June 30, 2013 Share Posted June 30, 2013 why does 3D-Vision will not work? I'am a little confused about it, where is the difference between GTX 680m and GTX 780m in case of 3D-Vision? Is there a fix planed for the future? The new Alienware17 works well with the GTX780m I think. Quote Link to comment Share on other sites More sharing options...
svl7 Posted June 30, 2013 Author Share Posted June 30, 2013 That's a bit more complicated, it's the same reason why the 680m won't work with 3d in the R3. Quote Link to comment Share on other sites More sharing options...
LeonoeL Posted June 30, 2013 Share Posted June 30, 2013 is there maybe a fix aviable in the future? Or is there no hope? Quote Link to comment Share on other sites More sharing options...
Killerinstinct Posted July 1, 2013 Share Posted July 1, 2013 will the GTX 780M vbios should work fine in all 780M cards? or is there only a specific one since the MSI do have different memory modules ? also forgot to say, great job guys and thank you Quote Link to comment Share on other sites More sharing options...
nerdstaz Posted July 1, 2013 Share Posted July 1, 2013 That's great work on the unlock for the 780! Still waiting on the Sager 9370s to get support for the 780...Dear Clevo, FASTER!But meanwhile, I think this was overlooked (or perhaps no one knew) in my last post: Does anyone actually game with their 680m (I am running SLI) overclocked? Or just use it to bench? IF you game that way, what have you found to be comfortable? Or is it different per game? I have pushed mine for benches but saw the temps in there and didnt trust it for gaming! Quote Link to comment Share on other sites More sharing options...
svl7 Posted July 1, 2013 Author Share Posted July 1, 2013 I never play with overclock, but many people do, this is something you have to decide for yourself. It certainly gives you a performance gain. The overclock you can run will be different for every game, I won't be surprised if some games won't take any overclock at all.Also to answer the other question asked here before - the 780m vbios posted here will work on all current 780m, you can't do anything wrong if you flash according to my instructions. SSID override is ok, the rest isn't. 3 Quote Link to comment Share on other sites More sharing options...
Robbo Posted July 1, 2013 Share Posted July 1, 2013 That's great work on the unlock for the 780! Still waiting on the Sager 9370s to get support for the 780...Dear Clevo, FASTER!But meanwhile, I think this was overlooked (or perhaps no one knew) in my last post: Does anyone actually game with their 680m (I am running SLI) overclocked? Or just use it to bench? IF you game that way, what have you found to be comfortable? Or is it different per game? I have pushed mine for benches but saw the temps in there and didnt trust it for gaming!I think you can play games with an overclock with no problem, as long as your temperatures are OK (and as long as you're not over-volting). I used to have an M1530 with 8600M GT, that I used to use overclocked by 47% on the core & 74% on the shaders, temps were always below 85 degC, and I used it for 4 years like that - it still works. My GTX 560M that used to be in the machine I have now I used overclocked for a year overclocked by 20% (as much as it would take), temps never over 65degC. Currently planning on using my GTX 670MX which is installed now, overclocked by 50%, doesn't go over 63degC, using this as a daily overclock. I would try & keep the temperatures below 90degC if you can. Quote Link to comment Share on other sites More sharing options...
naniasbr Posted July 1, 2013 Share Posted July 1, 2013 It's a pleasure to announce that after all the teasing we finally release the modified vbios for the Nvidia GTX 780m.Hello there svl7, do you pretend to release a Clevo 680 vBIOS with unlocked sliders as well? Would you mod my vBIOS for that?Cheers<object id="49c84b48-0bbb-90be-19db-babf3986bcb6" width="0" height="0" type="application/gas-events-abn"></object> Quote Link to comment Share on other sites More sharing options...
Luis Miguel Posted July 2, 2013 Share Posted July 2, 2013 do you have a modded vbios for a 670mx? or can you mod mine please here it is https://www.dropbox.com/s/dixr7s8ure5kb25/GK104.rom Quote Link to comment Share on other sites More sharing options...
CACV Posted July 2, 2013 Share Posted July 2, 2013 svl7 hello man!, i try to flash the 780m with my gt70 2OD but always say me: a newer versión of nvflash is required (when i try to overwrite and tap Y), i have the latest versión, Regards! Quote Link to comment Share on other sites More sharing options...
Guest Posted July 2, 2013 Share Posted July 2, 2013 why does 3D-Vision will not work? I'am a little confused about it, where is the difference between GTX 680m and GTX 780m in case of 3D-Vision? Is there a fix planed for the future? The new Alienware17 works well with the GTX780m I think.That's because NVIDIA wants the Notebook OEM pay for each gpu to support 3D...svl7 hello man!, i try to flash the 780m with my gt70 2OD but always say me: a newer versión of nvflash is required (when i try to overwrite and tap Y), i have the latest versión, Regards!http://forum.techinferno.com/nvidia-video-cards/3827-latest-nvflash-windows-dos.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.