thesuncatman 10 Posted December 2, 2012 Also i'd like to know about this bios - will it be possible to set my memory in 1600 mode after unlocking the bios??? On the INTEL site is said that the 2670qm sandy bridge CPU only supports max 1333 Mhz memory. But i saw meny people on such forums who have notebooks with 2670qm and 1600 or quicker memory. Some people say that such memory frequences are only able due to unlocked bios and the CPU actually still works on 1333. I would be very happy if it turns out that all the same it can operate at higher frequencies than 1333!!!!So what is the truth? Quote Share this post Link to post Share on other sites
James D 21 Posted December 2, 2012 I would be very happy if it turns out that all the same it can operate at higher frequencies than 1333!!!!So what is the truth?Jut buy any 1600 RAM except stupid Blue HyperX and it will work as it should on your 2670QM. Not sure if it will work at 1866. Quote Share this post Link to post Share on other sites
stevoz 11 Posted December 2, 2012 The unlocked bios for the gx740 is a couple of versions above my current BIOS.Does anyone know where MSI hides its BIOS change logs? 1 Quote Share this post Link to post Share on other sites
thesuncatman 10 Posted December 4, 2012 Jut buy any 1600 RAM except stupid Blue HyperX and it will work as it should on your 2670QM. Not sure if it will work at 1866.Sounds good:soap: but why are you so sure?you yourself tested the performance of the laptop based on 2670m with both memory and saw the difference in the results? Quote Share this post Link to post Share on other sites
Meaker 16 Posted December 4, 2012 Can you unlock the windows 8 bios for the GT60?http://www.msi.com/product/nb/GT60-0NE.html#/?div=BIOSAlso would this be compatible with the 16F3 barebone? Quote Share this post Link to post Share on other sites
omega939 30 Posted December 5, 2012 It seems that moderators here are soo busy nowadays.. Probably we can get feedback from them (with the new unlock bios) next year ... probably Quote Share this post Link to post Share on other sites
135 10 Posted December 7, 2012 for the 16F3 barebone there is no download link; does the one from gt60 work with 16f3? Quote Share this post Link to post Share on other sites
thesuncatman 10 Posted December 8, 2012 Due to Xonar now I'm able to use my MSI GT783R on max performance!!!!Thank you very much! Great work)) Quote Share this post Link to post Share on other sites
James D 21 Posted December 8, 2012 Sounds good:soap: but why are you so sure?you yourself tested the performance of the laptop based on 2670m with both memory and saw the difference in the results?Why, simple trust means nothing nowadays?CPU-Z Validator 3.1About second question... you asked yourself if it is possible to use it. Now when you got an answer you doubt in it?archieving - plus 2-3.5%games on dedicated GPU - good if gives 1%games on iGPU - plus 50% (depends)Why do you really need it? All you do in OS will get improvement like responce on clicking smth, Alt+Tab, using anything which is stored to RAM. Just better experience. We call it snappiness:) Quote Share this post Link to post Share on other sites
adkiller 12 Posted December 10, 2012 Could the unlocked GX60 BIOS here be used with AHCI mode or is it RAID mode only?I am pretty new to BIOS unlocks, sorry if it seems like a dumb question. Quote Share this post Link to post Share on other sites
DenoK2509 10 Posted December 10, 2012 Quotte:I am currently looking for people with 3rd-gen core-i (Ivy Bridge) G-series notebooks as testers. Please contact me if you are interested.Hi,A Have a MSI GT70 3 gen. Notebook with Win 8 64 bit. the Bios File are E1762IMS.50T First Release i had Interested for Beta Testing.Here are the Dates:Prozessor: Intel® Core™ i7-3630QM Prozessor der 3. Generation (2,40 GHz, Intel® Turbo-Boost-Technik 2.0 bis zu 3,40 GHz, 6 MB Intel® Smart-Cache)Festplatte: 128 GB SSD + 750 GB (SATA) 7200rpmArbeitsspeicher: 8192 MB (2x 4 GB DDR3)Grafikkarte: NVIDIA® GeForce® GTX 675MX-Grafik mit 4,0 GB GDDR5 VRAM und Optimus™ EnergiespartechnikGerman Win.8 64 bit.Greets: DenoK2509Sorry for my bad Englisch... Quote Share this post Link to post Share on other sites
adkiller 12 Posted December 10, 2012 I have one more question, is the unlocked GX60 BIOS compatible with systems using the E16FKAMS.508 BIOS?Is there a way for me to downgrade to the 305 BIOS provided in this unlock thread?Thanks! Quote Share this post Link to post Share on other sites
stas.b85 11 Posted December 11, 2012 Hello! I have a problem: after flashing the BIOSI have stopped working right USB port (which is combined with sound cards). Help please! MSI GT683 Quote Share this post Link to post Share on other sites
gecko 10 Posted December 13, 2012 hey again,i downloaded the zip file for the gx740 bios but it only contains the .rom file and not the afudos and upadate.bat like the tutorial says.i usually flash my bios by using DOS 98 USB drive and by typing the .bat file-name how am i suppose to flash the bios with the .rom?Thank you Quote Share this post Link to post Share on other sites
ale1975 10 Posted December 14, 2012 Sorry for my english... I'm new user...if i understand... i can unlock additional features in my bios? i've gt680... thanks Quote Share this post Link to post Share on other sites
Simonius007 10 Posted December 15, 2012 I am planning to install Gtx 680m 2gb in my MSI GT683R. Is it going to work with Official BIOS or I need to flash unlocked one?? Or it does not matter witch BIOS to use for NEW video card PCI express 3.0?? Quote Share this post Link to post Share on other sites
Simonius007 10 Posted December 16, 2012 Hello everybody)) Need help. Yesterday flashed my MSI GT683 with unlocked BIOS. And everything was alright, untill I change to XMP profile 1 and set ddr 1600 mhz and display color 24 bit instead 18 bit. I didn't boot anymore. So I follow with reset CMOS. And everything was alright. After I tried again but just to set DDR to 1600 mhz without set set to XMP profile (left "AUTO"), I am using default ELIXIR 1333 mhz memory 3x4 gb = 12 gb total . And it is not booting anymore. No matter I reset CMOS or not, I tried to flash BIOS by force with combinations mentioned in this tread (ctrl+home etc, all of them) and no any beep comming.Please help me. I need this machine badly. Quote Share this post Link to post Share on other sites
Meaker 16 Posted December 16, 2012 It looks like your ram may not be capable of that speeds. Never set an XMP profile with a set memory speed, it will never turn on with this setting combination.Have you tried doing a deep power off? Leave the CMOS battery out for a couple of hours.Otherwise some 1600mhz ram may be able to boot, or maybe just a single stick of the 1333mhz ram? Quote Share this post Link to post Share on other sites
Simonius007 10 Posted December 17, 2012 I tried to remove all my memory and left only one, but no affect( Finally I get memory from my friend (drr3 2gb from his ASUS Zenbook), I dont what frequancy it is. It was no any label.And BRAVO!! It is alive I reseted back to defaults and installed my 12 GB Elixir DDR3 1333 mhz (3X4Gb) and everything is working.Thank you for all support :0By the way, is it any option to OC my 2630QM in this unlocked BIOS? If there is, what sjould I do exactly)) Quote Share this post Link to post Share on other sites
tukan90 11 Posted December 20, 2012 is there any test version GE70-0ND mod bios? Quote Share this post Link to post Share on other sites
stas.b85 11 Posted December 21, 2012 Hello! I have a problem: after flashing the BIOSI have stopped working right USB port (which is combined with sound cards). Help please! MSI GT683Somebody can help me? Quote Share this post Link to post Share on other sites
Mike Sullivan 11 Posted December 21, 2012 About time I found a fix for this! Sick of watching my CPU go to 800MHz all the time...lol Quote Share this post Link to post Share on other sites
jamesrhine 10 Posted December 26, 2012 Anyone can help me,after i updated my bios to unlocked version,my laptop is gt683r,everything is ok!so after thatI do some changing of settings,like the XMP i put in profile 1 and memory in1600mhz, my memory is only 1333mhzWhen i save the changes and booted it only gives black screeni already done removing the Cmos battery lead butStill the same problem,hope somebody can help me,Thanks in advance Quote Share this post Link to post Share on other sites
James D 21 Posted December 26, 2012 Hello! I have a problem: after flashing the BIOSI have stopped working right USB port (which is combined with sound cards). Help please! MSI GT683Somebody can help me?Flash BACK.Anyone can help me,after i updated my bios to unlocked version,my laptop is gt683r,everything is ok!so after thatI do some changing of settings,like the XMP i put in profile 1 and memory in1600mhz, my memory is only 1333mhzWhen i save the changes and booted it only gives black screeni already done removing the Cmos battery lead butStill the same problem,hope somebody can help me,Thanks in advanceAre you trolling? Just read PREVIOUS page! All the same problem. Quote Share this post Link to post Share on other sites
Xonar 410 Posted December 27, 2012 Been really busy the last couple of weeks. gimmi a couple days to go through all that I've missed. Quote Share this post Link to post Share on other sites