I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
I have spent a little time in the past few days looking around this site. I would love for someone to point me in the right direction to a forum that has information that could help me out with my problem.
I have a:
Windows 7 Home Premium 64-bit
Intel I7-2820QM 2.3
Bios InsydeH20 Version 1.0 A12
NVIDIA GeForce GTX 460M
(4x) 4 GB Ram
samsung 2.5" 256 SSD (SATA3.0Gbps)
It has been an amazing machine for the last 10+ years. Minor issues, nothing that an Alien Respawn could not fix, till now! On battery power it works just perfect. Then I plug it in and it's all OK until I try to do anything, and then the screen goes white. The screen sometimes goes yellow, sometimes blue, but mostly white screen. It will do nothing until I do a hard reset (holding the power button till it turns off and turn it back on) with the power unplugged. If the power is not unplugged then it will go through boot up to windows swirling dots then go white again. If I plug it in and do nothing I can charge it, unplug and continue what i was doing. I have tried a lot of solutions bouncing around the internet, and thought I was having a DC Jack connection issue (replaced the ac/dc power adapter, then the motherboard). I get a better connection now but with the same white screen result. I stumbled into this forum and I'm hoping to find solutions to my issues. Then upgrade like so many others have.
Any ideas, comments or suggestions welcome.
Thank you in advance!
Hey i have an idea to change my old msi gx720 laptop Motherboard to one from a msi gx740 they look to have the same cutouts to screws and both laptops chassis look to be the same with outputs and that so my question is do you guys think it is possible to do it
msi gx720 motherboard – Google Søgning msi gx740 motherboard – Google Søgning
NVIDIA 'Maxwell' VBIOS mods
Here you find modified VBIOS versions for the mobile parts of the Nvidia 'Maxwell' series.
The VBIOS versions in this post are tweaked for performance and versatility. You'll get almost complete control over the performance parameters of your GPU.
List of available VBIOS mods:
Nvidia GTX 970m - 'OC edition' rev0 - >> 6 GB Version << - modified by @johnksss & svl7 -> see attachments Nvidia GTX 980m - 'OC edition' rev0 - >> 8 GB Version << - modified by @johnksss & svl7 -> see attachments
Screenshot demonstrating the capabilities of the 970m versions:
>> Read the instructions carefully before flashing! <<
If anything is unclear after reading or if you have additional remarks, please post in the thread.
- Go to the device manager -> 'Display Adapters' -> chooser your GPU, right click on it and choose disable
- Flash the VBIOS with mnvflash, a modified version of nvflash (see attachments). Here are detailed instructions for nvflash in case you aren't familiar with it.
- After the flashing is done: Enable the GPU once again in the device manager.
Do NOT use driver 347.09, it's broken and useless and won't allow you to overclock, even with the stock firmware.
Don't distribute the files hosted here outside of Tech|Inferno. Don't modify the files you download here.
Donation link in case you want to buy me a beer
Thanks and cheers!
I have a iBuypower CZ-17 laptop, with a 2012 AMI BIOS that has E1762 as the version, which I believe means I have an MSI G70 motherboard. It has a 675MX GPU, but it's not useable in Windows 10 despite being "seen" in the device manager. I believe an updated, unlocked BIOS would fix my issue and have located the thread on this site with the BIOS I need.
First of all, am I right? Will this fresh BIOS make my laptop that originally ran Windows 8 work with this old GPU?
And second, I created this account, will wait 24 hours and made this post. Is that enough to allow me to download the file, or do I need to post elsewhere?