Hello Fellow Tech Gurus!
I am having a huge headache after upgrading the ram memory of my m17x r3.
First let me start by saying I have been experiencing issues with my current ram setup recently, and so i decided to replace the ram inside of my computer, thinking they had gone out on me. It originally came with x4 2gb memory sticks, and as I started to experience issue, I started to removed them, and I was down to 1 2gb stick. It seems to me ram slots 1 & 2 are not working properly as when I put ram memory into them I would get BSOD in 5-10 mins of computer usage after boot. So I am thinking the slots have gone out. I also tested each slot individually and still same effect.
So I went on the try out slots 3 & 4 under the keyboard, which seems to work just fine when I use only 1 ram chip in one or the other. But the problem occurs when I try and fill both ram slots in slots 3 & 4 under the keyboard with crucial 2x 8 gb of ram sticks, which total to 16gb total ram memory.
BSOD and freezing occurs like crazy. But if I use just one of the ram sticks in either slot, no problem.
I dunno if this is hardware or software. I am think that my motherboard is on its way out the door, but any suggestions you all have would be great. I have already clean installed win 7, and is currently running bios A10 (unlocked, I believe)
I would also like to note that my motherboards internal vga is not detected, and just noticed this a few days ago upon trying to figure out the ram situation.
other issues is my laptop battery is pretty much dead, and the only for my computer to cut on is if the AC adapter is connected
I would also like to know can 1x 16gb 1600 ram stick run in my computer? or is it not supported by my motherboard?
Alienware M17xR3 (2011 3D FHD ed)
A10 (should be unlocked)
Microsoft Windows 7 Home Premium (64-bit)
Intel® Core™ i7-2960XM CPU @ 2.70GHz
Intel® 6 Series/C200 Series Chipset Family
Nvidia GTX 680m
IDT High Definition Audio CODEC
High Definition Audio Device
Networking and I/O
DW1501 Wireless-N WLAN Half-Mini Card
Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
HMA TAP-Windows Adapter V9
Crucial 8 GB (x2 qty) DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V • 1024Meg x 64 •
(these only work under bay 3 or 4, but not dual 8gb at the same time, otherwise BSOD)
WDC WDBNCE5000PNC SSD (installed into bay 0)
So I just got myself a ram upgrade for the laptop which is a mech-15hs, and to my disappointment, it doesnt support XMP, but would thaiphoon burner enable that? The chips I bought are supposed to "auto-overclocked" to highest potential, but obviously it just stays stock without xmp.
These are the chips: https://www.kingston.com/dataSheets/HX426S15IB2_16.pdf
The PNP profile is 15-17-17-35-60-467 & 2666mhz and thats the same first timings as the first xmp profile at 15-17-17, so is there any point of even getting thaiphoon burner at this point? Or would using that enable xmp and auto overclock and such?
The CPU is an i7-7700hq, and I dont think anyone has gotten past 2666mhz with it anyway, so am I just beating a dead horse with TB? Or are my chips really that good out the box?
my HP 8770w was sold with a Dualcore-CPU. I am now using an i7 3920XM, but there are missing two RAM-holdings on this mainboard (Many manufactures leave them out on dualcore MBs ). The 4-RAM-MB is too expensive just for this approach. So I tried to solder the missing RAM-Holdings on the Mainboard by hand:
But the Laptop does not boot, if I add a RAM to the new holding (Same behaviour as like booting without any RAM). The Laptop still works, if I left the new holding empty.
QUESTION: Is it possible, that a 3-RAM-configuration principally does not work and I will have to add the 4th module? Have anyone here successfully expanded the number of RAM-holdings?
Does anyone know if I can smack 2x16gb(32gb) ddr3l sodimm into the y510p without issue?
Yes the documentation states it's upgradable to 16gb maximum, but surely that's bs, I mean the 4700Mq is capable of 32gb RAM so what's the problem?
I read some speculation online on various forums, but can anyone confirm it is possible? I'm just scared to buy the RAM if it's not going to work.
InB4 "you don't need that much RAM"