Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

On 5/21/2020 at 12:03 AM, MattyB said:

Ok, that's interesting. Optimus (SG) will not work with the 120Hz display so it will be interesting to see what happens. 

So, I finally received my new 1070 which was completely compatible with my M17x R4. I installed the modded drivers, put the heatsink on with new 2mm thermal pads, and started the computer up flawlessly. I also today received my 330 Watt PSU. Only problem is that I'm getting temperatures of 85C under heavy prolonged loads. What is your cooling solution?

Share this post


Link to post
Share on other sites

Awesome! The hardest part is getting it working. If you've used 2mm pads across the whole card then I think this could be your problem. From everything I have read before, you need 1mm pads in most areas and also a 3mm pad in a few spots. If the pads are too thick then the heatsink may not form a good connection with the GPU die, which is the most important thing to cool. I will see if I can find the pad placement guide for you. Also have a look at your GPU fan. There are a few different ones with varying CFM's. See if there is a Dell Part# or CFM rating on your fan.

Share this post


Link to post
Share on other sites

I so, I have changed them to mostly 1mm thermal pads. 

 

But i see that most of the thermal pads I have changed (Vram especially) aren't  great contact with the heatsink.

 

For some reason I want to upload a picture of my thermal pad setup, but it won't pet me....

Edited by Crustieraxe

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By mx90
      Hello, I've got a Dell Precision M4700 with a 3940xm. I've read that in this particular CPU and laptop model, the bios is locked because the stock settings are considered an overclock. As-is, the core temps on the CPU do reach up to 90-100. They seem to spike up and down a bit when benchmarked with Intel's Extreme Tuning Utility, but they certainly do reach over 90C. Is there no way to unlock this bios (version a18, though a19 is released - I haven't updated yet, should I?) and even if there were, would my only option be a heatsink mod on top of that?
       
       
      edit: I've mistakenly posted this under Desktop & General Hardware, perhaps a mod could move or delete the thread? Apologies!
    • By mx90
      Hello, I've got a Quadro M2200 (GPU: GM206GL-A Revision A1, and MxM 3.0a Maxwell card) with the following bios: 84.06.76.00.1C
       
      I've read that this card is very similar to the GTX 965m, but that it has been underclocked considerably. It seems to be a good candidate for unlocking since I hardly see the temperature exceed 70C as-is. I'm requesting help with this - I'm not sure if it's possible to simply flash the vbios from a Dell GTX 965m (MxM 3.0a) or if some type of edit of the card's current vbios would do the trick. I'm hoping someone could help me out with the specifics of doing such an edit if that's the case. 
       
      Thanks!
    • By fibul
      Hello Everyone,
      I am an owner of MSI GT70-20C and my GTX770m gpu i now dead.
      I have a question and i hope someone will help.
       
      I have ordered GTX 970m 6GB DDR5 and i cannot find the exact vBios for that graphic card.
      My current bios version is: E1763IMS.51B
       
      Thanks in advance,
    • By victordenis99
      I own an Asus Fx504-gm laptop with an 8th gen i7 and nvidia gtx 1060. I ve been having issues with random hard freezes and I later found out that absolutely anyone with this exact model has the same issue and not even Asus service can fix it as they just replace every component and the problem persists so my guess is that this is software related.
      I ve been noticing that I Always hit power limit(I monitorised it with afterburner) and so I have power limit throttling. The thing is, for this laptop the power limit is locked and I cannot modify it.
      My last resort is to try a modified bios that can unlock the power limit slider. My question is: Is this possible? Are there any modified bioses that can unlock the power limit or the only way is to unlock it via the motherboard? If so, where can I get a reliable modified bios for my laptop and how can I check compatibility? Thx.
    • By Klem
      In this thread you can post your requests for Lenovo Y50-70, Lenovo Y70-70, Lenovo Z50-70, Lenovo Z70-70, Lenovo G50-70, Lenovo G70-70.
      If someone want upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or unlocked vbios for overclock NVIDIA card, then you can post your request in this thread. Also, if you have a problem with fan pulsating/clicking on any modified bios then you can post your request in this thread.
       
      The flashing procedure include two steps:
      1.  Flash main system bios.
      2.  Flash EC firmware.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.