Jump to content
EwinRacing Flash Series Gaming Chairs
Dr_Cachetes

G751 980M vBIOS MOD

Recommended Posts

Hello everyone, it is 2020 and i've been looking literally EVERYWHERE for a modded vBios for an Asus G751jy (980m 4gb) to unlock voltage control above 25mV, can someone help me?

I've seen people have been linking the mod so here's mine, latest 213

GM204.rom

Share this post


Link to post
Share on other sites
3 hours ago, Dr_Cachetes said:

Hello everyone, it is 2020 and i've been looking literally EVERYWHERE for a modded vBios for an Asus G751jy (980m 4gb) to unlock voltage control above 25mV, can someone help me?

I've seen people have been linking the mod so here's mine, latest 213

GM204.rom

Hi!

Ok. Check PM.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

I can show you how mod your bios on the G751JY, I have the same laptop and was able to unlock and mod bios myself...If anybody wants to know how just ask!

Share this post


Link to post
Share on other sites

Hi Klem, it would be so great if you had a modded 4GB 980M bios (I have alienware) If it's already overclocked I would be overjoyed!

Share this post


Link to post
Share on other sites
29 minutes ago, ethan_kapethan said:

Hi Klem, it would be so great if you had a modded 4GB 980M bios (I have alienware) If it's already overclocked I would be overjoyed!

Hi! 

Post here your stock vBIOS, I'll take a look. 

Share this post


Link to post
Share on other sites
Posted (edited)
16 hours ago, Klem said:

Hi! 

Post here your stock vBIOS, I'll take a look. 

Hi Klem, here you go. Anything you can do with undervolt or make faster would be so amazing. Thanks for your hard work. After you modify it, should I not run MSI afterburner any more once I flash your new version?

980M_orig_bak.rom

Edited by ethan_kapethan

Share this post


Link to post
Share on other sites
2 minutes ago, ethan_kapethan said:

Hi Klem, here you go. Anything you can do with undervolt or make faster would be so amazing. Thanks for your hard work.

980M_orig_bak.rom 109 kB · 0 downloads

I think undervolt is impossible.

Share this post


Link to post
Share on other sites
1 minute ago, Klem said:

I think undervolt is impossible.

How about just make faster? Do I still need MSI after?

Share this post


Link to post
Share on other sites
2 minutes ago, ethan_kapethan said:

How about just make faster?

I doubt that it will be faster.

 

4 minutes ago, ethan_kapethan said:

Do I still need MSI after?

For overclock? If so, then I think Nvidia Inspector or ASUS GPU Tweak will be better choice.

Share this post


Link to post
Share on other sites
26 minutes ago, ethan_kapethan said:

Hi Klem, here you go. Anything you can do with undervolt or make faster would be so amazing. Thanks for your hard work. After you modify it, should I not run MSI afterburner any more once I flash your new version?

980M_orig_bak.rom 109 kB · 1 download

Ok. Check PM.

Share this post


Link to post
Share on other sites

Hi, I have a G751jY european version, and I want to enable G-sync. Could anybody help me what I need to do? 

I am very capable to solder, hardmod or softmod anything that needs to be done. But I need to know what I need to adjust.

Any help is welcome.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By pippocarlot
      Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
    • By svl7
      Files contained in this archive:
      FTP-DOS.zip prr2.zip M18x R2 - BIOS A03 'unlocked.zip M18x R2 - BIOS A08 'unlocked.zip M18x_R2_-_BIOS_A08_-_[unlocked]_-_[IRST 11.0.6.1702].zip M18x_R2_BIOS_A03_-_[unlocked] - [IRST 11.6.0.1702].zip M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A10_-_[unlocked]_V2.zip M18x_R2_-_BIOS_A08_-_[unlocked].zip M18x_R2_BIOS_A03_-_[unlocked].zip  
      For information on how to use the files in this archive, see here:
       
       
      My donation link in case you want to buy me a beer
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.