Jump to content
EdMkn

Problem on the virtualisation Acer e5-523g

Recommended Posts

Hello,

I am requesting your help. I have an Acer e5-523g, and  I have applied the method with h2ouve mentioned in this forum to activate the amd-v feature, and it worked. But everytime on two, when the system was shutting down, whether intentionally or low battery, the virtualization was going back to deactivate. And I always repeated the same process. Until one day: when I enter in the cmd, everytime I tap “h2ouve -gv vars.txt” or “h2ouve -sv vars_mod.txt” it shows sth like:

 

Now parsing Variable Information...

LoadDeviceDriver fail,

GetLastError=0x2 Failed to get bios data!

Fail to get Variable Information

 

My problem is that I don’t really know what LoadDriverDevice means, and how to make it work

image.png.da82b661d12532da0e39e573f8657e02.png

Share this post


Link to post
Share on other sites

This computer refuses the reinitialization of the system and the repair processus is never fully completed, whether it is with an Usb key or using the computer features. 

Share this post


Link to post
Share on other sites

Hi!

I think you can try completely disable (turn off) laptop with long press and hold the Power button. Then enable laptop, go into bios setup menu, on the last tab "Save and Exit" set to "Default Settings", then press F10 to save, then press Enter button.

After that try use “h2ouve -sv vars_mod.txt” again.

Share this post


Link to post
Share on other sites
1 hour ago, Klem said:

Hi!

I think you can try completely disable (turn off) laptop with long press and hold the Power button. Then enable laptop, go into bios setup menu, on the last tab "Save and Exit" set to "Default Settings", then press F10 to save, then press Enter button.

After that try use “h2ouve -sv vars_mod.txt” again.

I've tried that, still the same situation

Share this post


Link to post
Share on other sites

Ha ha ha...

Hello,

I've finally found a solution while searching for another version of h2ouve...  I never thought there could be another versions.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Diky
      help me to unlock amd-v acer aspire one 725
      it's my vars file
      please..
      vars.rar
    • By Solaire
      Hello everyone,
      some time by now I flashed a custom Vbios (thank you Klem) on an Acer Predator 15 G9-591 and I started doing some tests about how far I could go overclocking the gtx 970m without running too hot. With the voltage up to 1150mV and something like 300 additional MHz for the core clock, in the strongest stress condition for both Gpu and Cpu ( i7-6700hq undervolted), the Gpu reaches a max temp of 85C (with some 86 spikes but never more than that).
      Considering that soon I'm going to relid both Cpu and Gpu and clean everything in the internals (laptop is 4 years old) I think I'm going to have some additional heatroom.
      I've already tested some further overclocking and I noticed that even if the temperatures remains under 93C (which is just for testing purposes, but after relidding temps could be nicer) graphical glitches occur and after some time most games crash. But my question is, could it be because of lack of power supply? The laptop charger provides 180W 
      Could there be an increase in overclock margins with a 230W psu or something like that? (Obviously with the same 19.5V output)
      If anybody tried something like that on any laptop model, or knows the matter, I'd like to know
    • By Klem
      Hi,
      In this thread you can post your requests for AMD-V unlock on ACER E5-553G and same laptops with AMD CPU's, for example Acer Aspire E15, Acer Aspire E5-523G, Acer Aspire E1-522, Acer Aspire E1-420, Acer Aspire E5-421, etc.
       
      Now we can unlock  AMD-V function for virtualization support. In general, this method described in the article on this link: http://www.geektech.co.nz/how-to-unlock-...enovo-y700
      This way requires Windows as a system because  some tool works only in Windows.
       
      Download this tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
      Extract the archive H2OUVE.rar directly on the Desktop and copy the H2OUVE folder directly on the disk C:\
      Then run the Command prompt as Administrator and execute these commands:
      cd  \
       
      cd  H2OUVE
       
      H2OUVE.exe   -gv   vars.txt

      After each command press the Enter button.
      After that, you'll have the file "vars.txt" in H2OUVE folder.
      Post here this file "vars.txt" or upload it to any fileserver and  send me the link.

      For reference, here's the EFI-table with available settings for this notebook: https://drive.google.com/open?id=0B4NHIB...WI4LW14bE0
      And here's the setting that needs to be changed:
      0x1C40B             Setting: SVM support, Variable: 0xEE {05 91 54 02 55 02 54 00 34 12 EE 00 00 10 00 01 00}
      0x1C41C                 Option: Disabled, Value: 0x0 (default) {09 07 27 00 10 00 00}
      0x1C423                 Option: Enabled, Value: 0x1 {09 07 28 00 00 00 01}
    • By xerman
      Hello all! Im posting this here in hope to receive some orientation or help regargind my egpu project.
       
      I have my old and trusted Acer 5750G and I’m still using it everyday for work. I’m a photographer and it has worked quite well with some upgrades:
      -Upgraded i5 to i7 2630qm.
      -Upgraded ram, 8gb to 16 gb.
      -Upgraded HD to SSD.
       
      Some facts:
      – I have the unlocked bios so I was able to set the mpci port as “hot pluggable” and I can also deactivate the dedicated nvidia 630m from the bios itself.
      – I have bough this case [PCIe PCI-E EXP GDC External Laptop Video Card Dock / Laptop Docking Station (Mini PCI-E interface Version) ] that will arrive home in 10-15 days.
      – I have ordered a wifi usb card.
      I was thinking in getting a nvidia 1060 6gb and plug it to my old laptop using the mpci port. I ask for your advice and knoledge regarding this:
      1- Is this a good card choice?
      2- Will I face any problem with my setup or there is something important I should take into consideration?
      3- Will software that uses CUDA (photoshop and premiere, for example) get reinforced with the new card?
      4- How much processing power will get lost for the “small” port I will be using?
      Thanks a lot again, and sorry for my english mistakes!!
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.