hello all, i just got a gtx 980m from a seller on amazon. i have the card installed in my alienware m17x r4, i have updated the bios to A15 stock, in the bios its showing the card is there, in windows 10 the card is also shown in device manager, but it has the code 43 error, i have disabled driver signing and installed a modded driver but its not working, i have uefi legacy mode enabled, i need help getting this working, do i need a modded bios to get the card working? is my card a g-sync version ? any help with this would be great, also if it is a g-sync card, can i vbios flash it with a non g-sync vbios? how can i tell if this card is a clevo or msi ? thanks in advance
Hi Guys, may be someone could give me a good advice...
Alienware m17x R4 with 120hz panel form r3 (LG - LGD02C5)
Bios Dell A15 (Also tried unlocked A11)
Now installed GTX 860m 4gb (Kepler edition) works with no issue
Bought GTX 970 6gb Aetina production Works under MS driver Does not show image on eDP internal screen right after installing Nvidia modded drivers All external ports ( HDMI, eDP VGA) works with no issues - tested on benchmarks the card itself works great The internal screen could blink several times depending on vBios flashed ( so the card is trying to fire it up) Internal screen is not recognized properly - Using Monitor asset manager i observed that: GTX 860 create two monitor entries 1) Realtime and 1) Registry GTX 970m creates two monitor entries 1)Registry and 2) Registry If I change the max Hz using CRU to 100 and Close/Open laptop screen it will show picture in 1024x768 resolution with no possibility to extend and it also see a "Virtual monitor" attached to real one ( extended)
So the main issue is that INTERNAL Display is recognized AS 2 displays 1 connected to the internal laptop port and one into Display port:
vBios tried Premav2, MSI,Dell,Clevo Drivers version tried: 340,350,380,411
I searched for a something related to my issue here and found themes which are really near - but with different problems
alienware 15 r2 970m with i7-6700hq vbios request so i can overclock and mess with voltage.
BIOS version backup made with techpowerup GPU-z.
or can someone re direct me to one already made that will work? all links i find are dead, thanks.
Hey guys, I have an Alienware m14x R2, and I have been trying to get access to the BIOS so that I can change the boot options (Everything is locked, I am unsure if someone set a password of if these are locked by default).I've tried updating the BIOS, and resetting the CMOS and nothing has changed this. Would anyone know if there are other options I can explore? Thank you.