JerryTubs Posted August 30, 2019 Share Posted August 30, 2019 (edited) Hey there, the short of it is that I am limited on my graphics card options. I previously had an asus single fan 1050ti and upgraded to a 1650 The power supply is 750w so that shouldn't be a problem but I still have to use MB power only (long story), no external power. Anyways before the new 1650 came in, I benchmarked my system and it ran 52fps on valley benchmark in 1440p @ 60hz. Not bad for a 1050ti honestly. I benched it again after installing the 1650 and it is consistently around 48fps.learn spanish online The only difference in my system is that I have to use a PNY card which only has a HDMI and DVI output (single slot), whereas my asus 1050ti used DP. Other than using HDMI instead of DP, everthing else is the same. Is displayport really that much better? My monitor supports HDMI 2.0 so I figured I was actually upgrading. Edited September 6, 2019 by JerryTubs Link to comment Share on other sites More sharing options...
LuckyJay92 Posted September 2, 2019 Share Posted September 2, 2019 Im assuming you used ddu to wipe the driver before you installed the new one? Try installing 436.02 after you use ddu. Also, use something like 3dmark, firestrike or timespy. valley is a bit old for these cards. Link to comment Share on other sites More sharing options...
Recommended Posts