Jump to content
Sign in to follow this  

Recommended Posts

Hello everyone,

some time by now I flashed a custom Vbios (thank you Klem) on an Acer Predator 15 G9-591 and I started doing some tests about how far I could go overclocking the gtx 970m without running too hot. With the voltage up to 1150mV and something like 300 additional MHz for the core clock, in the strongest stress condition for both Gpu and Cpu ( i7-6700hq undervolted), the Gpu reaches a max temp of 85C (with some 86 spikes but never more than that).

Considering that soon I'm going to relid both Cpu and Gpu and clean everything in the internals (laptop is 4 years old) I think I'm going to have some additional heatroom.

I've already tested some further overclocking and I noticed that even if the temperatures remains under 93C (which is just for testing purposes, but after relidding temps could be nicer) graphical glitches occur and after some time most games crash. But my question is, could it be because of lack of power supply? The laptop charger provides 180W 

Could there be an increase in overclock margins with a 230W psu or something like that? (Obviously with the same 19.5V output)

If anybody tried something like that on any laptop model, or knows the matter, I'd like to know

Share this post


Link to post
Share on other sites

Hi!

1. I think that 1150mV  it's too much for GTX 970M, I think that 1056 - 1068 mV is optimal for overclock GTX 970M.

2. Also, I think that 230W PSU better choice then 180W PSU for overclock GTX 970M (in laptops with any i7 CPU).

Share this post


Link to post
Share on other sites

Hi again, I've been out from home these weeks but a few days ago I managed to change the thermal paste along with a complete dust cleanup of fans.

And the temperatures dropped of 23 Celsius for gpu and 21 for cpu, wow! I used Arctic mx-4 applying a tiny layer, the stock thermal paste was poured all over the place in absurd quantities and it was hard and crappy

However, with 300 more mhz for core clock and 200 more for memory clock I have to set the voltage to 1175 (so one step over 1168) otherwise very few games such as gta V have graphical artifacts and minor glitches and in particular gta V crashes after some time -maybe something like 1h playing or less-. The same happens for FurMark Opengl. Anyway at 1175 temps are always around 69-70 C degress, so I guess it's good, right?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Brian
      Well that didn't take long for NVIDIA to respond to Navi. The new 436.02 Game Ready Driver adds the following features:

      Game Ready
      Provides increased performance and the optimal gaming experience for Apex Legends, Battlefield V, Forza Horizon 4, Strange Brigade, and World War Z
      Gaming Technology
      Adds Beta support for GPU Integer Scaling Adds Beta support for Ultra-Low Latency Mode Adds support for new Freestyle Sharpen Filter Adds support for new G-SYNC compatible monitors Driver release notes: https://us.download.nvidia.com/Windows/436.02/436.02-win10-win8-win7-release-notes.pdf


      This isn't the old max pre-rendered frames setting, its supposedly a new improved algorithm that matches AMDs anti-lag feature for Navi.

      Next up is support for integer scaling which Intel recently announced but it seems NVIDIA beat everyone to the punch. Unfortunately, this is only for Turing for now:


      Additionally NVIDIA has created a new filter for FreeStyle simply called "Sharpen" which improves performance and visual clarity that is supposed to be on par with RSI but with much broader support and granular adjustment. According to Eurogamer, "They also point out that the amount of sharpening can be adjusted from 0 to 100 per cent, applied on a per-game basis and works with games across all major graphics APIs: DX9, DX11, DX12 and Vulkan".


      Finally, the driver brings with it some game performance improvement, including very popular titles like Apex Legends which sees up to 23% boost at 1080p:



      Overall a pretty solid release, it had some issues earlier when it was released with GeForce Experience being force installed but it should be remedied by now.

      View full article
    • By Brian
      Well that didn't take long for NVIDIA to respond to Navi. The new 436.02 Game Ready Driver adds the following features:

      Game Ready
      Provides increased performance and the optimal gaming experience for Apex Legends, Battlefield V, Forza Horizon 4, Strange Brigade, and World War Z
      Gaming Technology
      Adds Beta support for GPU Integer Scaling Adds Beta support for Ultra-Low Latency Mode Adds support for new Freestyle Sharpen Filter Adds support for new G-SYNC compatible monitors Driver release notes: https://us.download.nvidia.com/Windows/436.02/436.02-win10-win8-win7-release-notes.pdf


      This isn't the old max pre-rendered frames setting, its supposedly a new improved algorithm that matches AMDs anti-lag feature for Navi.

      Next up is support for integer scaling which Intel recently announced but it seems NVIDIA beat everyone to the punch. Unfortunately, this is only for Turing for now:


      Additionally NVIDIA has created a new filter for FreeStyle simply called "Sharpen" which improves performance and visual clarity that is supposed to be on par with RSI but with much broader support and granular adjustment. According to Eurogamer, "They also point out that the amount of sharpening can be adjusted from 0 to 100 per cent, applied on a per-game basis and works with games across all major graphics APIs: DX9, DX11, DX12 and Vulkan".


      Finally, the driver brings with it some game performance improvement, including very popular titles like Apex Legends which sees up to 23% boost at 1080p:



      Overall a pretty solid release, it had some issues earlier when it was released with GeForce Experience being force installed but it should be remedied by now.
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.