Jump to content
ounces

Solving banding issue with 8770w "DreamColor" screen

Recommended Posts

Posted (edited)

After spending significant time and effort to obtain "DC" screen for 8770w (which is essentially a regular IPS panel with fancy board that converts 8bpc LVDS to 10bpc DP), I have finally got and installed one. All works great, except of the one problem...


It has pretty bad banding / posterization in lower shadows. I have tried profiling it in different modes (full range, sRGB, rec709) - issue persists, and it indeed shows only in the lowest part of the characteristic curve. Mids and highlights are represented fine and show low deviation from reference values.

GPU is HP K4000M, Nvidia drivers installed "as it is", video-card is identified without a hitch.

Banding was not present with the original TN panel using the same GPU.

 

While checking a software side, I have noticed that Win10 has bit depth set to 8-bit...

 

9X4Q7bh.png

 

My initial reaction was, - "Easy, let's change it in `nvidia-settings` and we're all set":

1BWtyne.png

...but that would be too easy, right? After selecting 10bpc and clicking "Apply" screen went off and back on, only to show that depth stayed at 8bpc. Repeating the above few times yielded exactly the same result and I'm not in a hurry to meet a cliched (and laymen) definition of insanity.

 

Let's check GPU-Z. So far so good, nothing unusual. Notice the highlighted BIOS version and subvendor string: M0RNBhk.png

 

Time to delve into other tabs. We are running WDDDM v2.4 which supports GPU dithering, but hey... BIOS version has changed! pLZ3jD0.png

 

Briefly back to `nvidia-settings` to check what is reported by vendor's own utility:

tdwWYoj.png

 

So far, we have two strings for BIOS version:

  1. 80.04.5A.00.02 (let's call it an "A")
  2. 80.4.33.0.37 (let's call it a "B")

 

Notice how 2nd one seems to not follow hexademical notation. Lastly, "NVIDIA BIOS" drop-down, reports "A" version: 8eGIP0c.png

 

...and monitor section which confirms that rig is indeed capable of 10bpc, but currently running at mere 8bpc:

yzcmaff.png

 

Windows "Adapter settings", reports version "B". It's 2019, diversity is a must.

1T7gTEE.png

 

"NVidia inspector" is of the same opinion:

wyT4CUY.png

 

Now, let's use some seriously legit tools and check-in exported BIOS file in `nvflash`:

OPiRzca.pngjKxQP1M.png

 

Here we have two three interesting findings:

  1. Reported vendor is Dell, not an HP. See this link for details.
  2. BIOS version is back to "A". Have I already mentioned diversity?
  3. MXM module uses MX25L2005 flash storage in WSON-8 packaging. If things go real nasty, we should be able to rescue a patient via Pomona clip and external programmer.

 

Loading the same file in "Kepler BIOS tweaker" confirms the facts:

v8mzFSC.png

 

EDID settings, courtesy of NVidia Control Panel. Hex dump can be found at the bottom of this post. ZnpmdDk.png

...Shall I be worried about "60.02Hz" refresh rate?

 

To summarize:

  1. Why two different BIOS versions are reported? Anything to do with UEFI (e.g. HP is sideloading its own during boot)?..
  2. Why two different vendors reported? As far as I remember, this is branded HP GPU.
  3. Where to get "clean" BIOS of K4000M for future experiments? Ideally from 8770w equipped with "DreamColor" panel from a factory.

 

Link to the dumps, BIOS ROM and monitor EDID: https://mega.nz/#F!zGgRmQIL!9q2QFZtHuK2RQ-WHXMA4Mg (also attached to this post)

K4000M.zip

Edited by ounces
formatting and files

Share this post


Link to post
Share on other sites
Posted (edited)

Fun ensues. As suggested on other forum, I have tried to install v388.16 which has failed  on Windows 10:
npxqo6q.png

Afterwards, I have decided to explore options of updating BIOS.
Here is the latest build I have found: ftp://ftp.hp.com/pub/softpaq/sp62501-63000/sp62640.html

Extracted .ROM from the installation package:
acFY1Yj.png

Installing with the latest version of `nvflash`:
IDFG4f0.png

Then, I have installed NVidia driver v411.63 (oldest one available in "Archive" section).
Now, it reports HP as vendor, however "persistent 8bpc" bug stayed exactly as before.

 

While I can switch to 10bpc in NVidia Control Panel, display briefly blinks and returns to 8bpc.

BIOS version reporting is still confusing. This is after re-flashing:
rOzV4Q2.png

Edited by ounces

Share this post


Link to post
Share on other sites
Posted (edited)

Ok, this deserves a new post, I was able to obtain 10bpc output. Here is what was done:

  1. Install HP display assistant --> reset to factory settings --> set colourspace to "native/user"
  2. Reboot in "Safe Mode", use DDU to remove previous NVidia drivers.
  3. Download and install ancient v385.67 directly from HP(sp82364.exe)
  4. Voila!


UT4JiNI.png

While banding is much less visible now, I can still see it on 16b gradient. Meh. Questions:

  1. How to update drivers while preserving 10bpc capability?
  2. Could people with DC panel please download the gradient and check if they see any banding at all?

 

For the record, here is my data from "Display Assistant":
Nl8sK0u.png

Abovementioned .PNG: https://i.imgur.com/v9W9ou7.png (also, attached to this post)

Photo of my screen (not like it's overly representative...)
mZKwhyY.jpg

 

 

Gradient-16bit.zip

Edited by ounces

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Blocker35
      Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
       
      - MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
      - Razer X Core 
      - Apple TB3 to TB2 Adapter
      -  TB2 Cable (Cable Matters)
      - 23inch AOC External Monitor
       
      I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
      I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
      Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
    • By Kel
      I got the exp gdc beast 8.5 got all the connections right... laptop boots up... fans turn on the gpu.... device manager detects gtx 1060 with a “ ! “ in a yellow triangle. Now what to do.... i tried to do the bios mod.... but realised that i have 3.07 version. 
      Questions-
      1 is there any way to get this done without the mod?? 
      2 if mod is the only way... kindly help me with step by step instruction in laymans terms... i m not a techy... so i might not understand technical terms.... altho i am interested... but learning yet. Please help. 
    • By thechillhacker
      Hello all
       
      I have a Clevo P370EM3 laptop with a pair of GTX 680Ms in SLI mode and have never been able to get Linux to work properly with full acceleration and without tearing. I have tried every xorg config I can find, and even all the modifications from the nvidia configurator to no avail. Has anyone been able to get these things to work 100% in Linux? I have typically used ubuntu based distros, including Mint, and every available driver version from the repositories, but can never get it to work quite right.
       
      Thanks for any help anyone can provide. It is killing me to run Windows on this machine because of these issues, and I am almost to the point of installing the inferior 7970 cards.
       
      Have a great day
      -TCH
    • By jhsd1124013561
      Help! I created a BOS BOOT DISK and use legacy to boot in DOS.   But it is saying that "An operating system wasn't found".   I have extracted all the files (the alienware m18x r2 a11 unlocked bios) into my external hard drive (format: NTFS)
    • By loud88gt
      Hello, I'm new here and heard this was the place to go for help.  I've got an HP 8770w that came with the Firepro M4000 originally.  I bought a Nvidia K4100M and the corresponding heat sink as a replacement.  I've installed it but get a black screen at startup.  It almost seems like it tries to start and then the light on my mouse goes out and it tries again.  I was going to delete the old drivers and install the new ones after it started up.  Should I install drivers first or am I missing something else?  I can easily do the disassembly/reassembly stuff but my knowledge is limited when it comes to software.  Any help you guys can give me is greatly appreciated!
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.