Jump to content
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  
Mnky313

Precision M6700 Expresscard RX-480 (GDC Beast V8.4d)

Recommended Posts

To anyone wondering about eGPUs on M6700s, its not too complicated, there is just a process that must be done on boot every time:
You need to have the eGPU connected and powered on before booting the laptop, once you get to the Intel RAID screen disconnect the eGPU and wait for windows to load up, once windows is loaded reconnect the eGPU and you *should* be able to use it and be able to hot-swap it (though you should disable it in windows before unplugging it) installing the normal AMD drivers worked fine for me, though the original release of Adrenaline 19.1 blue screened the first time.

I usually run with 3 1080p monitors attached to the 480, replaced my old i5 desktop with this laptop due to the convenience of storing everything on one machine, the laptop has a 256gb SSD and 2x 750GB hdds in raid 0, there is a 2TB WD black attached to the eSATA on the dock.
eGPU and external HDD are powered by a 500W evga desktop ATX psu, the EXP GDC's ATX power adapter was clunky and broke while trying to use it, so I just plugged in a CPU 4 pin cable upside down to power it, not worried about it because the bulk of power is coming from the 8 pin on the GPU anyway.
https://imgur.com/a/L2UUSL2

Edited by Mnky313

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By depmixels
      hello everyone, I have a MSI GT683R with a dying (pretty much dead actually) GTX560M in it.
       
      I am looking to upgrade it to a new GPU, I have found a AMD Firepro M6100. (I first wanted to upgrade to a GTX970M, but that's too expensive for now... and corona is also making things difficult) I have already ordered a second heatsink to modify because I didn't want to modify the original heatsink it came with.
       
      But, my question is. Does it even work in this system? I have heard of people getting it to work in the barebone variant of this system. But I am not sure if it would work in the 'fully loaded' variant.
       
      Also, my games are mostly RAM/CPU dependent and I am looking for a little extra power in this system. I have found a I7-2860qm and I want to upgrade to 32GB of RAM, is it possible on this system? the sticker says 'max. 16GB of RAM' But I have feeling it says that due to the limitation of the cpu that's already on this system (I7-2630QM, 16GB RAM max.)
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       
    • By Brian
      With AMD's long awaited Navi release, do you plan to purchase the 5700/XT?
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.