Hello!
 
I have recently acquired my Dell Inspiron 15 7000, and I am interested in building an egpu setup for it. It has a USB-C port. Any recommendations/guides out there?
 
thanks.

I reversed the input polarity on my m15x jack after a botched psu repair. Computer worked fine, but overall power control is messed up. System only boot on both battery and psu, no battery charge, and a very low battery drain (arround 6wh).
 
I aways had battery issues whith my 8 years old m15x after my original battery died. Bought a new one two years ago, didn't work. Checked on upower, basically no info on manufacturer, power or history. So i refunded and used the system hooked on the psu as usual. In August i bought a new one, worked flawlessly for a day. The next day the battery died from nowere. Checked upower, bus was ok, battery was charging extremely slowly (6wh), history showed subpar disharge before shutting down. I got mad at this point, decided that psu was to blame. Opened it, checked everything, noticed some wear on the male jack. Resoldered it, connected on computer. Nothing happened, so i checked the voltage. That's when i realised that i screwed up big time. I swaped the positive and negative wires. Decided that one mistake was enough, so i sent my m15x to a trusted repair shop (latter found that they just hooked the battery and gave me back as soon as it booted, they didnt even open it). Got my pc a week later, but the battery didn't charge . Worse, it was slowly discharging (same 6wh as before), and it needed both the psu and the battery to turn on. At 65%, it worked as usual for my college semester, but the battery is dead, and so is my computer. I bellieve i burned some voltage controller or something. I'm pretty competent at soldering thing's (evem smd components) when i know what to do, and i can understand simple circuit's, but when i got my hands on the m15x datasheet i got overblown. I cant make heads or tails about it. I aways lurked this forum and i bellieve your guys are the best when it comes to finding creative solutions to technical problems concerning microelectronics. I followed a guide in this forum as a teenager to upgrade this same computer to a gtx680m, overclocked stuff, got custom bios, and had a lot of fun learning. The m15x is a deprecated platform, but it's a part of my history that i dont want to let go.
So please guys, help me.
 

help me to unlock amd-v acer aspire one 725
it's my vars file
please..
vars.rar

I found this: https://photonicsguy.ca/projects/t530
 
It's a nice how to on altering the whitelist on the W530/T530 laptop.

Hey allI, I need help  with modding my BIOS. I was wondering if anyone could help me mod my BIOS to unlock the 'Advanced' tab which I don't have on my InsydeH20 F.52 Rev 5.0 Bios? Thanks so much and I look forward to your response! Laptop: HP Pavilion x360  ba109tx
 
Specs: 
i7-8550U
Nvidia Geforce 940MX
Intel(R) UHD Graphics 620
12GB DDR4-2400 SODIMM RAM
128GB SSD, 1TB HDD
 
Laptop Product Page: https://support.hp.com/gb-en/document/c05650773
Vanilla BIOS: https://support.hp.com/sg-en/drivers/selfservice/hp-pavilion-14-ba100-x360-convertible-pc/16851098/model/18161600