Jump to content
Sign in to follow this  
MessiWessi

M17X R4 - speaker problems

Recommended Posts

Hi,

 

I bought a alienware m17x r4 a few weeks ago. The problem is: I have noise (distorsion) on the right speaker. Had anybody in past the same problem and is it a known problem regarding this model? I feared at the beginning that the soundblaster is defect but I tested it with headphones and everything is fine. I already ordered a new speaker pair and will install it within the next weeks.

 

But if you tell me that this problem is known and not resolvable I can save my effort.

Share this post


Link to post
Share on other sites

Have you tried reinstalling the drivers?

Configuring the EQ in the sound blaster settings?
 

If you've tried that and the headphone and left speaker sound is working as it should, then I'd say it might be just the right speaker which is defective. 

 

 

Share this post


Link to post
Share on other sites

Yes, I reinstalled the drivers and took the newest version.

 

Mysterious is: I bought another M17X R4 with a graphic problem (as a project for repairing). And what can I say: This laptop has the same problems regarding the speakers: noise (distorsion) an both speaker in this case. I have the feeling that this is a general problem. OK, two of a model is not representive but it's strange that both M17X R4 have problems with the speakers. 

 

I will replace the speakers within the next two weeks and will see what happened. But I fear the problem will not be solved...

Share this post


Link to post
Share on other sites

I also bought my M17X R4 with a GPU issue, Solder issue which I revived it using the oven bake method, Although it's temporary.

 

If you end up replacing the speakers and it doesn't fix the issue, then it would be a sound card issue.

 

Have you run the Dell ePSA diagnostic utility? It will detect most problems.

Share this post


Link to post
Share on other sites

Yes, I've run it and it showed no errors except that I got noise and distorsion as I run the speaker test. :D

 

Maybe it's a problem with the creative sound chip. I've read that it could be possible that the external sound is correct although the internal is faulty. :(

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By handale30
      I added this post in the another forum a few months ago but felt like it could also help someone here, enjoy... So ive owned quite a few Alienware laptops but out of all of them my favorite has always been the great m17x R4. I love its aggressive looks, its lines and grills remind me of lamborgini design, the 1 glass sheet screen, the media keys looked futuristic and its laser etched name plate added a touch of personalization and attention to detail that they used to have. So considering it still has powerful specs for modern standards, i7 processors, 32gb ram, 2ssd and 1msata slots, 120hz 3D display, mxm slot, sd card reader, I couldn't help but to sell my 2 current laptops (15 R1 980m, 4k, 15 R3 1060) and purchase a pristine example of this machine with all its original packaging to upgrade it up to todays specs.   The Original Specs of this particular system were:  * Intel i7 3820qm 2.7ghz / 3.7ghz  * Nvidia GTX680m 2gb  * 8gb DDR3 RAM 1600mhz CL11  * 250gb Samsung 840pro SSD  * 1tb Seagate Momentum HDD  * 17" 1080p 120hz 3D display Desired Upgrades:  * Intel i7 3940mx 3.0ghz / 3.9ghz  * Nvidia GTX 1070 8gb  * 32gb DDR3 Ram 1600 CL10 Corsair  * 1tb Samsung 860 EVO SSD  * Liquid Metal and better thermal pads    2019 Specs: * Intel i7 3940mx 3.0ghz / 3.9ghz  * Zotac GTX 1070mxm 8gb  * 32gb DDR3 Ram 1866 CL9 Corsair Vengeance  * 1tb Samsung 860 Evo SSD  * 256gb Samsung 840 Pro SSD  * Liquid Metal and Fujipoly 17w/mk thermal pads  * 17.3" 1080p 120hz 3D display   I already purchased the GTX 1070 mxm, 32gb RAM and the 1tb SSD. The GTX1070 is installed and working at its full power. I applied Thermal Grizzly Conductonaut liquid metal thermal compound to both CPU and GPU and Fujipoly ultra extreme 17.0 W/mK thermal pads with my modified GPU heatsink and new X-bracket. CPU is overclocked from OEM BIOS to stage1    4.1ghz  3.9ghz 4cores. No chasis or board was cut or damaged during this process as I wanted to keep its integrity and no throttle issues what so ever. As I already had the 120hz edp screen, it was an easier job to do and thanks to @Striker123 and to @D4ddy for their threads as they made me have the guts to go through the project and to Rick for selling me this perfect example of a computer.   Alienware m17x r4 1070 mxm http://forum.notebookreview.com/threads/msi-gtx-1070-mxm-successfully-working-on-alienware-m17x-r4-another-socket-victory-against-bga-crap.803637/ Alienware m17 Ranger 1070 mxm http://forum.notebookreview.com/threads/alienware-17-r5-gtx-1070-mxm-3-1b.800137/   Here are some before and after benchmarks so you can see this baby flying let me know what you think about these numbers... I will be uploading more pictures soon as it only lets me upload 5. If you guys have any questions id be glad to help out.   current issues:    - the GPU fan does not automatically work so I have to use HWinfo to manually build the fan table but HWinfo sucks balls at this and doesn't start them automatically either, also with HWinfo I take control of both CPU and GPU fans at the same time and sometimes I just want my CPU fan to be spinning. so if someone has a fix for this man that would be great!    
    • By David9972
      I'm sure this is a question which has been asked many, many times...……………..I stupidly decided to update my BIOS from it's factory default with a low battery. Guess what...…..I had a powercut
      Now I'm getting three flashing blue lights followed by three red - also seven beeps. I've tried disconnecting the CMOS and the internal battery with no luck. I've tried formatting a USB with rufus, copying Dells .exe file onto the stick (File Name: Alienware_15_R3_17_R4_1.5.0.EXE) from Dells website with no luck...…….PLEASE HELP!!!!!!!!!!!!!!!!!!!! 
    • By yoshomiamoto
      Hello Fellow Tech Gurus!

      I am having a huge headache after upgrading the ram memory of my m17x r3. 

      First let me start by saying I have been experiencing issues with my current ram setup recently, and so i decided to replace the ram inside of my computer, thinking they had gone out on me. It originally came with x4 2gb memory sticks, and as I started to experience issue, I started to removed them, and I was down to 1 2gb stick. It seems to me ram slots 1 & 2 are not working properly as when I put ram memory into them I would get BSOD in 5-10 mins of computer usage after boot. So I am thinking the slots have gone out. I also tested each slot individually and still same effect.

      So I went on the try out slots 3 & 4 under the keyboard, which seems to work just fine when I use only 1 ram chip in one or the other. But the problem occurs when I try and fill both ram slots in slots 3 & 4 under the keyboard with crucial 2x 8 gb of ram sticks, which total to 16gb total ram memory.

      BSOD and freezing occurs like crazy. But if I use just one of the ram sticks in either slot, no problem.

      I dunno if this is hardware or software. I am think that my motherboard is on its way out the door, but any suggestions you all have would be great. I have already clean installed win 7, and is currently running bios A10 (unlocked, I believe)

      I would also like to note that my motherboards internal vga is not detected, and just noticed this a few days ago upon trying to figure out the ram situation.

      other issues is my laptop battery is pretty much dead, and the only for my computer to cut on is if the AC adapter is connected

      I would also like to know can 1x 16gb 1600 ram stick run in my computer? or is it not supported by my motherboard? 

      thanks!

      Specs:

      Alienware M17xR3 (2011 3D FHD ed)

      Service Tag:
      30W75Q1

      Bios ver:
      A10 (should be unlocked)


      Operating System
      Microsoft Windows 7 Home Premium (64-bit)

      Processor
      Intel® Core™ i7-2960XM CPU @ 2.70GHz

      Chipset
      Intel® 6 Series/C200 Series Chipset Family

      Graphics
      Nvidia GTX 680m

      Audio
      IDT High Definition Audio CODEC
      High Definition Audio Device

      Networking and I/O
      DW1501 Wireless-N WLAN Half-Mini Card
      Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
      HMA TAP-Windows Adapter V9

      Memory
      Crucial 8 GB (x2 qty) DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V • 1024Meg x 64 •

      (these only work under bay 3 or 4, but not dual 8gb at the same time, otherwise BSOD)

      Configuration ID:
      CT3283724

      Storage
      WDC WDBNCE5000PNC SSD (installed into bay 0)
    • By michaelgqld
      Hi everyone. I have had a bit of search around but I have not found anything yet pertaining to my issue. I have an Alienware 17 R1 (Late 2013 model). It originally came with an i7 4900, a GTX780m, 120hz 3D panel with intel graphics disabled. I have just got a Dell GTX980m 8GB (BIOS 84.04.2F.00.79 - Device ID 10DE 13D7-1028 05AE) and put it in and it works fine getting into windows and running 2D. However, when I run any decent 3D the graphics constantly hits power limiter and downclocks to around 800mhz. This is confirmed to be power limit in gpuz perfcap reason and this happens regardless of temperature. Running a Unigine benchmark has actually showed the card's performance to be just lower than the 780m I replaced. Using HWiNFO64 I have found that the GPU is being limited to 80 watts. It briefly goes up to over 100 watts but drops to 80.

      Power Supply is 240 watt

      This laptop always runs off mains power and the battery only lasts a few seconds regardless of apparent charge.

      I should also mention that I have tried,
      Setting nvidia control panel power management mode to prefer maximum performance.
      Disabling Battery Boost in nvidia geforce experience
      Setting windows power options to high performance
      I have even installed a fresh windows 10 on a different hard drive and have observed the same result.

      Has anyone else done this upgrade and had no issues, are there any known fixes, is this card faulty or just not going to work correctly.

      Thanks
    • By jhsd1124013561
      Help! I created a BOS BOOT DISK and use legacy to boot in DOS.   But it is saying that "An operating system wasn't found".   I have extracted all the files (the alienware m18x r2 a11 unlocked bios) into my external hard drive (format: NTFS)
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.