Jump to content
Sign in to follow this  
cactaur1640

Projector for PC Gaming Display

Recommended Posts

Hello everyone!

 

So on occasion I host gaming nights over at my house, and usually end up hooking my laptop up to a big TV so me and a couple friends can all play all kinds of multiplayer games (either emulated or off of steam).

 

But I was recently thinking that it would be fun to get a projector set up, so that we could play on a huge blank wall in my living room.

 

With that being said: I'm new to purchasing projectors, so I'm not familiar with what kinds of features/specifications I should be looking for (and I'd like to keep the cost down if it's possible).

 

So I was wondering if anyone has any advice for me on what to look for in features/specifications, affordable places to buy from, or just general info on what I'm trying to do. 

 

Any help would be super appreciated! :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad T450s.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or already upgraded Display and after that can't adjust screen brightness, then you can post your request in this thread.
      Important!
      For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/itm/USB-Programmer-CH341A-Series-Burner-Chip-24-EEPROM-BIOS-Writer-25-SPI-Flash-AU/153117073868?epid=577511738&hash=item23a67d21cc:g:XKEAAOSw5UdbW-iL
       
      https://www.amazon.com/Parts-tower-CH341A-Programmer-Software/dp/B01FVVHCVC/ref=sr_1_4?ie=UTF8&qid=1522179315&sr=8-4&keywords=ch341a&dpID=51BO7eGgO5L&preST=_SY300_QL70_&dpSrc=srch
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/MAUSAN-Socket-Adapter-150MIL-205MIL/dp/B06ZYSNJF3/ref=pd_sbs_21_3?_encoding=UTF8&psc=1&refRID=XM79QJWGED6B4K2VEZDJ
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
       
    • By picardilly
      Hey guys, I am Grga and i am new here. I rarely use forums but i am desperate in this case.
      So, as i have seen many of you have had the issue with obsolete BIOS versions for clevo P7xxZM machines,
      So i would like to hear your experiences and how you went about it. 
      I have recently bought an ssd Samsung 970 PRO NVMe M.2. From which i would like to boot the windows10.
      Little did i know that there was no support for that kind of protocol in the BIOS or that there is such thing as UEFI (for which i am still not sure what that is exactly, except some kind of successor of BIOS).
      So i did a bit of research and updated my Bios and ec to 1.03.15 and 1.03.09 respectively for which i understand is the last available official release. I changed to uefi mode with secure boot disabled etc... in short i did everything that my (limited) knowledge about these things allowed me to do (and the sweat of excitement and fear when i was flashing the bios for the first time in my life). But, alas, it all yielded no success,  and now i am lost. I have really no idea what to do, and whom to ask for help except for you guys here. The only thing that i understand worked for some of you is when you mentioned a wizard named @Prema so therefore i will try to do the same....
    • By Losercore13
      Is there a way to get a 144 HZ Display for the m18x R2? I was trying to think of a meaningful 5th Post for promotion, so there it is! Haha, but really, is there?
    • By Webshooter38
      Hi all,
       
      I'm debating whether or not to replace the thermal paste in my Lenovo y510p. I've started overclocking a bit, and I have an external fan, but I would like to not have to run the fan as fast because it is a little loud. I have been reading a bit about different thermal pastes, and I'm wondering if there is even a big difference between stock thermal paste, and something like the liquid metal from thermal grizzly. It sounds like it'd work better, but I don't want to fall for a good marketing scheme. If anyone has experience with this and has or hasn't seen big differences, your input would be greatly appreciated.
       
      Thanks in advance!
      -Web
    • By ShineGlizzy
      Hey guys whats going on? I have an M17X R3, been running the 780M perfectly fine for about 7 months now. I've updated the driver once before, but it seems I'm having problems with all of the latest releases. Whats happening is when I download the latest driver, I run the setup so the 398.36 folder gets saved on my computer. Well thats what is NOT happening. Every time I run it, I see the folder pop up, but once the Nvidia downloader fails (as it should), the 398.36 folder disappears! I cant figure out how to make it stay there permanent! I've disabled driver signing and everything. Any suggestions?
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.