Jump to content
EwinRacing Flash Series Gaming Chairs
DgknGkdn

LenovoLenovo Y510P Video Card Update issue [Windows 10]

Recommended Posts

The computer I used was '' Lenovo Y510P ''. There is a '' Nvidia GT755M [SLI] '' as a display card. I have tried both ways of downloading the video card driver from both GeForce Experience and Nvidia driver site. Both kinds of graphics cards are starting to update. Later, the 'graphic driver is installed' part of the screen goes and never comes again. I can not enter Windows when I turn off the computer. I have to take format from scratch.

After formatting, Windows automatically loads a graphics card driver in 2017, trying to update the driver again, it stays black on the screen again. I have to format again.

With DDU (Display Driver Uninstaller) program, I deleted the old video card driver and updated it again. But I met the same problem.

I communicated with Nvidia and stated that I had such a problem. They asked me not to install the 388.13 video card driver. That graphics card driver has been loaded without any problems. But I have the same problem with all the video card drivers out there.
 

NOTE: This problem only happens on Windows 10. I can update the display board without any problems in operating systems like Windows 8,8.1.
 

NOTE: I have been having this problem for about 2 months, before I could update my display card in Windows 10 without a problem.


The driver I am currently using is: 388.13

Share this post


Link to post
Share on other sites

I had the exact same problem. I removed the video card from the expansion port. Then I installed the driver, rebooted. The I shut the system down and replaced the card and restarted. SLI is fully functional. 

Share this post


Link to post
Share on other sites
4 hours ago, adam.jakey said:

I had the exact same problem. I removed the video card from the expansion port. Then I installed the driver, rebooted. The I shut the system down and replaced the card and restarted. SLI is fully functional. 

So, do you have any problems when you open it? When I turn it on, the computer gets stuck, and it turns out when I open it. Then again the same problem continues.

Share this post


Link to post
Share on other sites

No, the problem since has gone away. Maybe your expansion video card is bad. How does it run with it removed?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Cubitci
      To install the unlocked bios, I prepared and booted a freedos usb. I start the installation by typing flash.bat but every time I get the following error: Error 28: Protected Range Registers are currently set by BIOS, preventing flash Access. Please contact the target System BIOS vendor for an option to disable Protected Range Registers.
      How can i solve this problem ?
    • By arifhsn
      https://www.sendspace.com/file/0zjk9f
       
      please help i can't access my g5070's advanced menu
    • By raqall
      Hi!

      I would love to have my BIOS modded to disable the wireless whitelist.
      I tried to do it myself (dump BIOS from chip, disassemble, locate the reference to the error message "Unauthorized Wireless network card is plugged in..." memory address and modify the condition in the binary file so not to "land" in the infinite loop) but I couldn't dig to anything meaningful I could easily change.

      Laptop: Lenovo ThinkPad S440 (TYPE 20BB-S00400)
      BIOS version: 73ET71WW (1.71)
      Original WiFi/BT card: Intel Wireless-N 7260 (7260HMW BN) (vendor: 0x8086, device: 0x08B2, subdevice: 0x4262)
      Target WiFi/BT card: Broadcom BCM94352HMB (I haven't received it yet, waiting for delivery)

      Manufacturer BIOS download: bootable ISO, updater for Windows
      My BIOS dump (using CH341A SPI Programmer under Linux): http://www.mediafire.com/file/mn0gfr9ext7yqrn/S440_73ET71WW.bin/file
       
      Thanks!
    • By Klem
      In this thread you can post your requests for Lenovo Y50-70, Lenovo Y70-70, Lenovo Z50-70, Lenovo Z70-70, Lenovo G50-70, Lenovo G70-70.
      If someone want upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or unlocked vbios for overclock NVIDIA card, then you can post your request in this thread. Also, if you have a problem with fan pulsating/clicking on any modified bios then you can post your request in this thread.
       
      The flashing procedure include two steps:
      1.  Flash main system bios.
      2.  Flash EC firmware.
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.