Hey allI, I need help with modding my BIOS. I was wondering if anyone could help me mod my BIOS to unlock the 'Advanced' tab which I don't have on my InsydeH20 F.52 Rev 5.0 Bios? Thanks so much and I look forward to your response! Laptop: HP Pavilion x360 ba109tx
Nvidia Geforce 940MX
Intel(R) UHD Graphics 620
12GB DDR4-2400 SODIMM RAM
128GB SSD, 1TB HDD
Laptop Product Page: https://support.hp.com/gb-en/document/c05650773
Vanilla BIOS: https://support.hp.com/sg-en/drivers/selfservice/hp-pavilion-14-ba100-x360-convertible-pc/16851098/model/18161600
By Kunal Shrivastava
Hi guys, I am the proud owner of a Clevo p775dm3-g notebook purchased from azom.systems (authorized Clevo reseller in India, Model rebranded as Azom Legion-17.3 inches). Here are my specs:
Core i7 7700 (non-K version): undervolted by 110 mv and turbo boost disabled in BIOS- machine uses prema mod BIOS.
GTX 1080: undervolted by 100 mv on all frequency steps using MSI afterburner voltage/frequency curve editor. clocks are untouched.
16 GB DDR4: Cant remember clocks.
1440p 120 Hz screen: No tinkering done to refresh rate.
CPU has been delidded and repaste has been done on both CPU/GPU dies with gallium based TIM-Coolaboratory liquid ultra if I recall correctly.
My issue is GPU hitting max temp limit of 90 degrees while playing DOOM and framerate drops from 110 avg to mid 60s-70s with horrible stuttering- this is thermal throttling for sure.
System was running beautifully after repaste at 86 degrees max/ 77 degrees average at 100 percent fan speed. A month later I decided to see how much further I could push the system and ended up undervolting the CPU/GPU and RAM even further. The RAM undervolting part didnt work as well as I'd hoped, and I ended up resetting the BIOS to undo everything and reapply the previous setting (-110 for CPU with turbo boost disabled.)
I noticed that immediately after BIOS reset, both my CPU and GPU temps were 5-10 degrees higher even with the undervolt/underclock applied. Also, I think the fans were a bit louder before I reset the BIOS which leads me to believe that for some reason the fans are now capped at 80% max fan speed. There doesnt seem to be a fan speed selector in the BIOS or anywhere else so I cant say for sure whether this is a fan related issue or something else.Before the reset I could override the BIOS setting and set the fans to 100% by pressing fn+1, could I have done something to that setting after resetting the BIOS ? I dont think I have damaged the CPU or GPU as temps are holding fairly steady at 90-91 degrees and laptop doesn't shut down while gaming.
If I have overlooked something or if anyone reading this has any solution help would be greatly appreciated.
All settings/drivers/windows version/app version are exactly the same before and after BIOS reset.
BAKED BIOS FOR TM, KM, DM, P6, P4 SERIES with most menus and options unlocked.
THESE BIOS MODS ARE ONLY FOR PEOPLE WHO KNOW WHAT THEY ARE DOING!
I'VE BEEN BUSY WITH SOME STUFF PLUS MY SYSTEM HASN'T BEEN WORKING FOR SOME TIME BUT I SHOULD BE ABLE TO CONTINUE MY WORK SOON
I'M CURRENTLY WORKING ON V3.0 WHICH WILL INCLUDE UPDATED UEFI DRIVERS, MICROCODE BIOS SCREEN SHOT SUPPORT AMISCE SUPPORT(For some models) PLUS MORE.
I'M ALSO WORKING ON MODS FOR OTHER MODELS TOO.
ALL TM, KM AND DM SERIES ARE V2.0 AND NOW HAVE WINDOWS FLASHER INSTEAD, JUST EXTRACT AND RUN FLASH.BAT
WARNING! BIOS FLASHING IS RISKY SO MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE PROCEEDING.
FLASHING THE WRONG BIOS OR INTERRUPTING THE FLASHING PROCESS WILL BRICK YOUR SYSTEM!
USE AT YOUR OWN RISK!
TM, KM AND DM SERIES
P6 AND P4 SERIES
IF YOU LIKE MY WORK FEEL FRE TO BUY ME A COFFEE ENJOY!