Jump to content
EwinRacing Flash Series Gaming Chairs
Klem

Lenovo ThinkPad T440p / T440s/ T540 unlocked BIOS menu / wlan / wi-fi whitelist mod

Recommended Posts

In this thread you can post your requests for Lenovo ThinkPad T440p / T440s / T540p.

If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.

Important!

For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!

 

Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.

 

 

CH341A.jpg

T440p.jpg

 

 

Edited by Klem
  • Thumbs Up 5

Share this post


Link to post
Share on other sites

Hello Klem!

I recently acquired a Lenovo T440P, and would appreciate if you could help me get the WLAN whitelist removed, as well as the Advanced Menu unlocked.

I used a SPI programmer CH341A to dump my BIOS from W25Q32FV chip.

The dump i sent you via PM.

Thanks, and I appreciate any help! 

Share this post


Link to post
Share on other sites
34 minutes ago, MilkyWay said:

Hello Klem!

I recently acquired a Lenovo T440P, and would appreciate if you could help me get the WLAN whitelist removed, as well as the Advanced Menu unlocked.

I used a SPI programmer CH341A to dump my BIOS from W25Q32FV chip.

The dump i sent you via PM.

Thanks, and I appreciate any help! 

Hi!

Ok. Your bios mod done. Check PM.

Share this post


Link to post
Share on other sites

Hi, Klem!

I used my ch341a_spi to dump my bios from my W25Q32.V chip in my T440p. I just sent you the BIOS dump via pm. Would you be able to modify it to get both the unlocked BIOS menu added and the WLAN whiteless removed?

Thank you!

Share this post


Link to post
Share on other sites
1 hour ago, Tuxiee said:

Hi, Klem!

I used my ch341a_spi to dump my bios from my W25Q32.V chip in my T440p. I just sent you the BIOS dump via pm. Would you be able to modify it to get both the unlocked BIOS menu added and the WLAN whiteless removed?

Thank you!

Hi!

Ok. Your bios mod done. Check PM.

Edited by Klem
  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Hi,

 

I have Lenovo T440P, It has been locked with Supervisor password on BIOS chip winbond 25Q32FVSIQ (1414). Is there a way to remove the password, so that i can enable Wireless LAN in BIOS setup.

 

Thanks,

Karthik sha

Share this post


Link to post
Share on other sites
3 hours ago, karthik sha said:

Hi,

 

I have Lenovo T440P, It has been locked with Supervisor password on BIOS chip winbond 25Q32FVSIQ (1414). Is there a way to remove the password, so that i can enable Wireless LAN in BIOS setup.

 

Thanks,

Karthik sha

Hi!

No, unfortunately unlocked bios can't help you with Supervisor password.

Share this post


Link to post
Share on other sites

Hi, I've got the SPI programmer and tried to dump the bios, but the clip was constantly 'sliding' off of the chip.. I'd assume there's enough space to get a grip without removing the whole base cover, but right now I am not sure if the issue is with my fatty fingers or do I really need to disassemble it to get the clear access to the mobo? 

Share this post


Link to post
Share on other sites
8 minutes ago, cuapy said:

Hi, I've got the SPI programmer and tried to dump the bios, but the clip was constantly 'sliding' off of the chip.. I'd assume there's enough space to get a grip without removing the whole base cover, but right now I am not sure if the issue is with my fatty fingers or do I really need to disassemble it to get the clear access to the mobo? 

Hi!

Unfortunately, I can't remotely help you connect the SOIC8 clip to the BIOS chip. If you can't connect, and you see that something prevents you connect, you can try to disassemble the laptop.

Edited by Klem

Share this post


Link to post
Share on other sites

Was rather thinking that someone who dumped it would chime in and tell whether they had to remove the bottom base or not :) Thanks, will tear it apart tonight and will get back to you when I have the dump. Thanks! 

 

OK I was able to dump the bios, send you a PM. 

Edited by cuapy
bios dumped successfully.

Share this post


Link to post
Share on other sites

Hi I have a dump of the bios (ver 2.51) is it possible to modify it to remove the whitelist and get the advanced menu? 

Share this post


Link to post
Share on other sites
3 hours ago, TuxMux said:

Hi I have a dump of the bios (ver 2.51) is it possible to modify it to remove the whitelist and get the advanced menu? 

Hi!

Ok. Check PM.

 

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Hi guys & modder,

 

I am about to buy SPI programmer and test clip to flash my bios. I am doing this to enable my laptop to install egpu.

My lenovo t440p is the one with core i5-4200u.

 

Just checking if the thread is still active (if there is any reply after my post :p)

 

I'll attach the dump later.

 

Thanks!!

Share this post


Link to post
Share on other sites
1 hour ago, villium said:

Hi guys & modder,

 

I am about to buy SPI programmer and test clip to flash my bios. I am doing this to enable my laptop to install egpu.

My lenovo t440p is the one with core i5-4200u.

 

Just checking if the thread is still active (if there is any reply after my post :p)

 

I'll attach the dump later.

 

Thanks!!

Hi!

Yes of course this thread is still active. When you create your dump, you can post it here with your request.

Share this post


Link to post
Share on other sites
2 minutes ago, Klem said:

Hi!

Yes of course this thread is still active. When you create your dump, you can post it here with your request.

Thanks man, I am waiting for the programmer and clip to be shipped :D

Fortunately I found local seller in my area. I'll post it as soon as I can make dump of the bios!

Share this post


Link to post
Share on other sites

Hello, did anyone have any issues using flashrom via linux seems... ch341a_spi is supported https://www.flashrom.org/Supported_hardware#Supported_chipsets

 

Curious if all these cheap ch341 programmers are all the same, and behave the same for flashrom to pickup the usb device correctly.

 

I also found this debian based program https://github.com/setarcos/ch341prog - but if the more widely used flashrom works, may as well use that.

Edited by onsit

Share this post


Link to post
Share on other sites
Hello Support,
 
I have a T440p Lenovo laptop, and forgotten the BIOS Super password, please can you advise if BIOS password can be removed?
 
What will be the procedure, will it require opening the laptop motherboard etc or just through software programming?
Can I do it myself if you provide steps and instructions?
How much will the service cost and how much time will it take to unlock the laptop?
 
Thanking in advance for your response.

Share this post


Link to post
Share on other sites
35 minutes ago, zeeshany said:
Hello Support,
 
I have a T440p Lenovo laptop, and forgotten the BIOS Super password, please can you advise if BIOS password can be removed?
 
What will be the procedure, will it require opening the laptop motherboard etc or just through software programming?
Can I do it myself if you provide steps and instructions?
How much will the service cost and how much time will it take to unlock the laptop?
 
Thanking in advance for your response.

Hi!

Unfortunately I don't work with any bios passwords. Sorry.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Hi, I'd like to upgrade my wifi card and access the hidden bios settings.

 

I have uploaded a bios dump here: https://www.dropbox.com/s/kqkkap4vcptze6o/t440p.zip?dl=0

 

I've upgraded the CPU to a 4810MQ already and plan on installing OS X. Please advise if there are any other BIOS tweaks you would recommend.  Thank you so much for your help!

Share this post


Link to post
Share on other sites
5 hours ago, adamchilders said:

Hi, I'd like to upgrade my wifi card and access the hidden bios settings.

 

I have uploaded a bios dump here: https://www.dropbox.com/s/kqkkap4vcptze6o/t440p.zip?dl=0

 

I've upgraded the CPU to a 4810MQ already and plan on installing OS X. Please advise if there are any other BIOS tweaks you would recommend.  Thank you so much for your help!

Hi!

Ok. Check PM.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By PepoJ
      Hello there!
      I am new on the forum. I'd need some help. I own a lenovo ideacentre t540-icb g, and i would need to unlock all the options in my bios, especially overclocking and thermal configuration. I tried with both amibcp and mmtool, but i didn't succeed (Error 18).
      I wonder if you could help me or give me some advice.
      Thanks in advance.
    • By thinkdad
      Hi,
       
      I need help in fixing my Thinkpad.

      I just got a T440p yesterday. It was working perfectly until the following:

      I reinstalled Windows and then I installed Vantage.

      I installed all the latest drivers.
      I also choose to install the bios update. The bios update ran in Windows and it asked me to restart. After restarting, the screen was blank. I tried powering it off and on and I saw the Thinkpad logo but after that the screen was blank.

      I tried powering on and off again and there's no Thinkpad logo now and the screen is just blank with the green power on. No sound, no nothing.


      Here's what I tried:
      Pressing the power button 10 times and then holding it for 30 seconds. Unplugged and battery is detachted Detached the CMOS battery and the reattached it Removed the ram, harddisk and optical disk drive. Attached the battery and inserted the charger. I turned it on and there was a couple of beeps Tried pressing FN+R and created a bootable USB I'd like to ask: How do I fix this? What do I need to do?
      Can I reflash the bios in some other way? Do I need to buy a new motherboard? Will this solve the issue? It's my first thinkpad and I'm really excited but I was bummed out that this happened. Can you please help me?

      Thanks in advance!
    • By pippocarlot
      Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
    • By Swick1981
      Bios Release Version – v2.0.0
       

       
      Updated or Modded Items:
      A11 UNLOCKED BIOS FOR m18Xr2 (UNLOCKED BY SVL7 AND FULL CREDIT GOES TO HIM FOR UNLOCKING!)
      SVL7 Also created the PRR2.EXE tool that allows you to flash the new bios by unlocking it.  (FULL CREDIT GOES TO HIM FOR THAT FILE PRR2.EXE)
       
      Here are ALL the things I've added, modded, and enhanced on this bios -
      I've added FULL LEGACY SUPPORT ON THIS BIOS with ONE or TWO CARDS (SLI).  You can FINALLY use Win 7 OS on your machine and run the 900 series GPU's! 
      This is a MAJOR breakthrough!
       
      LEGACY SUPPORT Confirmed.  Works with 900 series GPu's in single OR SLI formation Updated the Intel RST Legacy to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated Intel RST UEFI to v12.9.0.2006 (Supports TRIM in RAID0 - CONFIRMED) Updated the ONBOARD Video Card for the HD3xxx to v2171 - FROM v2132 Updated ONBOARD Video Card for the HD4xxx to v2171 - FROM v2132 Updated the LAN Firmware & PXE Boot from 2.0.5.9 to v2.0.6.6 ADDED NvMe Support for m18xr2 ADDED M.2 support for m18xr2 Updated CPU Microcode to v29 for the 2900 CPU's Updated CPU Microcode to v1c for the 3900 CPU's Updated GOP Driver for Intel Sandy Bridge CPU Updated GOP Driver for Intel Ivy Bridge CPU Updated MAIN GOP Policy module for the m18xR2 Eliminated some code that wasn't used in the m18xR2 Updated CSM Module (v2) Streamline some coding to make mod(s) run a little more efficiently (v2) Added FPARTS.TXT to rar file in v2. (I had forgot to add it in v1) v2.5 to be released shortly.  I've updated a few more modules that I didn't realize could be updated.  (It's only 3 modules, but it's still an update!)   It should be released in about a week.  Hope this helps ya'll!  
      Instructions to flash:
      Use a flash drive to create a boot disk into dos Unzip ALL files into the root of the flash drive (flash.bat, r2final.bin, fpt.exe, flash.bat, prr2.exe, fparts.txt,m18r2.hdr, m18r2.hdr.bin, readmefirst.txt) BOOT INTO DOS – Note, that when you set the bios to legacy in order to boot into dos, you MAY have to reinstall OS!  (Just be prepared to reinstall no matter what) Once you boot into dos, run the file flash.bat It will unlock your bios (THANKS TO SVL7’s BIOS UNLOCKING TOOL – ALL CREDIT TO HIM FOR THIS TOOL!) Let it flash… Reboot your pc, and enjoy the MASSIVE updates!  
      Be on the lookout as I do plan to release newer version with more updates in the future.  However, it wont be for at least a few weeks as I'm now working on legacy support for the m17xR4 and several other systems.  So please be patient!
       
      ENJOY!
       
      Thread link for more information and discussion:
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.