Jump to content

Recommended Posts

Hi,

 

I recently bought the new Toshiba RC100 m.2 2242 NVMe SSD for my Lenovo Y510p which has an m.2 port in it.

After installation the SSD wasn't showing up in my BIOS and also not on my OS Win 10 disk management. So I did a bit of research and installed mod BIOS for my Y510p by following the steps in the link: ( https://www.techinferno.com/index.php?/forums/topic/3546-lenovo-y410p-y510p-unlocked-bios-wlan-whitelist-mod-vbios-mod/ )
There are a lot more options in the BIOS menu now.

Even after doing the mod it's not showing up. The SSD works on my friend's "new 2017 dell gaming laptop" which has m.2 ssd support in it. I don't know what exactly to configure my BIOS to make it work. I've just done some hit-and-trial configs which have eventually failed.
If someone can help solve it Pleasee!!

 

 

P.S. : I can share all the available options available in the BIOS if required. :)

 

 

Share this post


Link to post
Share on other sites

Hi there, I'm planning to buy the same SSD for my laptop Y410P too but im afraid I'll get the same problem as you. So did you solve this problem? If so, can you share your experience? Thanks in advance!! 

Share this post


Link to post
Share on other sites

I'm pretty sure Y510p's M.2 only supports SATA interface while your m2 ssd is NVMe. You might need a m2 sata ssd to make it work.

Share this post


Link to post
Share on other sites
On 7/31/2018 at 4:17 PM, ryusoul said:

Hi there, I'm planning to buy the same SSD for my laptop Y410P too but im afraid I'll get the same problem as you. So did you solve this problem? If so, can you share your experience? Thanks in advance!! 

Hey, DON'T BUY IT. The M.2 in Y410p/Y510p doesn't support NVMe. It only supports SATA M.2.

My money got wasted.:P

On 10/13/2018 at 10:52 AM, KevinL said:

I'm pretty sure Y510p's M.2 only supports SATA interface while your m2 ssd is NVMe. You might need a m2 sata ssd to make it work.

Yeah, it only supports SATA, I saw it in the datasheet and circuit diagram of the motherboard. M.2 is only connected to the SATA bus of the chipset and not PCI.

 

I HATE LENOVO NOW.

Edited by AMan

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Donz7733
      I am planning to get this Charger (170w 20v 8.5a) - https://www.amazon.in/Lenovo-ThinkPad-4X20E50574-170W-AC/dp/B00MLTQ99Y
      &
      the Adapter - https://www.aliexpress.com/item/32975526334.html?spm=a2g0o.productlist.0.0.27cb747e6TEc28&algo_pvid=a7db42d0-97cb-4a37-be7a-d19c44bddf73&algo_expid=a7db42d0-97cb-4a37-be7a-d19c44bddf73-0&btsid=8d6ee0f9-08e9-4474-b63b-cc751403b4c7&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_60
       
      Will this combination work to run Both GT755m of Y510p?
       
       
      Thanks
       
    • By Diky
      help me to unlock amd-v acer aspire one 725
      it's my vars file
      please..
      vars.rar
    • By Awesome14
      I found this: https://photonicsguy.ca/projects/t530
       
      It's a nice how to on altering the whitelist on the W530/T530 laptop.
    • By 9vul14
      Hey allI, I need help  with modding my BIOS. I was wondering if anyone could help me mod my BIOS to unlock the 'Advanced' tab which I don't have on my InsydeH20 F.52 Rev 5.0 Bios? Thanks so much and I look forward to your response! Laptop: HP Pavilion x360  ba109tx
       
      Specs: 
      i7-8550U
      Nvidia Geforce 940MX
      Intel(R) UHD Graphics 620
      12GB DDR4-2400 SODIMM RAM
      128GB SSD, 1TB HDD
       
      Laptop Product Page: https://support.hp.com/gb-en/document/c05650773
      Vanilla BIOS: https://support.hp.com/sg-en/drivers/selfservice/hp-pavilion-14-ba100-x360-convertible-pc/16851098/model/18161600
    • By Kunal Shrivastava
      Hi guys, I am the proud owner of a Clevo p775dm3-g notebook purchased from azom.systems (authorized Clevo reseller in India, Model rebranded as Azom Legion-17.3 inches). Here are my specs:

      Core i7 7700 (non-K version): undervolted by 110 mv and turbo boost disabled in BIOS- machine uses prema mod BIOS.
      GTX 1080: undervolted by 100 mv on all frequency steps using MSI afterburner voltage/frequency curve editor. clocks are untouched.
      16 GB DDR4: Cant remember clocks.
      1440p 120 Hz screen: No tinkering done to refresh rate.

      CPU has been delidded and repaste has been done on both CPU/GPU dies with gallium based TIM-Coolaboratory liquid ultra if I recall correctly.

      My issue is GPU hitting max temp limit of 90 degrees while playing DOOM and framerate drops from 110 avg to mid 60s-70s with horrible stuttering- this is thermal throttling for sure.

      System was running beautifully after repaste at 86 degrees max/ 77 degrees average at 100 percent fan speed. A month later I decided to see how much further I could push the system and ended up undervolting the CPU/GPU and RAM even further. The RAM undervolting part didnt work as well as I'd hoped, and I ended up resetting the BIOS to undo everything and reapply the previous setting (-110 for CPU with turbo boost disabled.) 

      I noticed that immediately after BIOS reset, both my CPU and GPU temps were 5-10 degrees higher even with the undervolt/underclock applied. Also, I think the fans were a bit louder before I reset the BIOS which leads me to believe that for some reason the fans are now capped at 80% max fan speed. There doesnt seem to be a fan speed selector in the BIOS or anywhere else so I cant say for sure whether this is a fan related issue or something else.Before the reset I could override the BIOS setting and set the fans to 100% by pressing fn+1, could I have done something to that setting after resetting the BIOS ? I dont think I have damaged the CPU or GPU as temps are holding fairly steady at 90-91 degrees and laptop doesn't shut down while gaming.

      If I have overlooked something or if anyone reading this has any solution help would be greatly appreciated.
      All settings/drivers/windows version/app version are exactly the same before and after BIOS reset.
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.