It's locked & hidden by default, but I've got an i7 8700k & I'd like to utilise the intel 'quick sync'/hardware acceleration in Adobe encoding in order to speed up rendering. You don't need to have a display connected to it for it to work (i believe), but it's really fustrating how it is locked out, as it means I'm missing out on quite a useful time saving feature.
Is there any way to activate or mod this?
I dont know if this is the right forum to post this, (but i need 5 posts for downloading a vbios)
so my questions are these, thank you in advance for reading
I have bought a laptop with a half melted 880M GPU Im assuming the person did not keep an eye on temps,
so i went and replaced the card, it runs fine, (alright) but still, I remember modding my VBIOS for my 680 GTX back in the day, and it was fine, exceptionally faster,
and im looking for that 60 fps LOCK, like i got on my 680 after modding the vbios,
I did increase the voltage on the card to 1.212 I believe, from 1.114 ,
anyway I considering modding the cooling system as well for this laptop, because it definitely lacks cooling
My plan is to put another laptop fan (where the HDD1 bay is in the Alienware 17) bcause I removed that hdd it was constantly at 57c which is bad
even think it suffered some damage as speeds on it for specific games and tasks are pretty long, and it stays at 100% some times, which is weird, but it still works, so im using it.lol
, but in the meantime, I turned the laptop upside down, plugged in the HDMI cable, and now im blasting a ROOM fan at it, which is definitely helping with temps
before I would try to throttle the gpu speed at 77C, or 73C depending on the game or even saying screw it, I dont want throttling, and putting the throttle point to 83C,
I use SPEEDFAN , and it helps keep the laptop relativly cool, except when the gpu is under full load, putting my hand on it is ridiculously hot, so, with the fan on it, its not going above 70,
and taking a LONG time to get up there,
i am playing metro last light at around 60C at 60+ fps, where as before my temps were shooting upto 80 and it would hit the throttle point, so seeing as how this is a 120 HZ laptop, I rather not push it, since the card is not capable (and if it is, the cooling sure isnt)
the plan is to put the fan inside the HDD1 bay, and POSSIBLY daisey chain it to either A) the cpu fan header, or B ) the gpu fan hjeader,
not sure which "rails" the power for these comes from, would it be able to handle another fan???
it seems like a legit idea, seeing as how the rear of the heatsink has NO heat dissipation at all. which is the part that melted offcausing the old card to die in the first place.
basically the thermal pads look like they gunked the card and it was unfixable, I have a post to it on the Alienware Forum, which i could link later,
is it a good idea, and will the VBIOS WORK with my 880M (DELL) from a clevo, (now in an alienware) im assuming they are compatible, as long as they are dell.
also would I be able to get a Y adapter for the inside of a laptop fan, that would be AMAZING, i know they sell them for Desktops.
Hi! I registered for the specific topic. So, the big question for which I found no answer in internet.
Windows 7 on Intel Core 8th generation.
Officially, Intel supports windows 7 up to 6th generation. Unofficially, with an easy trick up to 7th generation. The question is, how can we make it work on 8th generation?
I installed windows 7 Ultimate 64bit on my new DELL Inspiron 5770 high end non-gaming 17 inch laptop, without any issue apart from the integrated GPU (Intel UHD Graphics 620). This also blocks the functionality of the AMD Graphics card too.
So, since for many reasons I want to have windows 7 instead of windows 10 or Linux, I did my best but I got stuck. I created a hybrid driver from 2 different versions of official Intel drivers, the latest, which supports this iGPU, but only on Windows 10 and the last windows 7 compatible, which does not include support for the specific 8th gen processor/graphics card, since it is newer. I mixed some files and also edited the inf file from the old driver.
I will share with you what I did, so that someone who has knowledge might get 100% functionality. I get only partial.
So, here is my guide.
1. Download the last Win7 compatible driver from Intel for HD Graphics. It is the version win64_184.108.40.20678
2. Download a newer version which is win10 only but contains the driver for your processor. In my case, Intel Core i7 8550U with DEV_5917. I downloaded the latest driver.
3. Make copies/backup of both folders and save elsewhere before starting editing.
4. Unzip both. From the unzipped ones, go to the new driver folder, then Graphics, then copy all components and paste in the Graphics folder of the old (220.127.116.1178) version. Note; So far in my case I didn't play a role if I replaced the same names of the old files with the new ones or skipped them to keep the old ones. Exception; do NOT replace the igdlh64.inf file and the igdumdim32.dll
5. Find the DEV number of the processor. Device Manager (from Control panel or search), right click on generic VGA Adapter, properties, details, ID.
6. Open the igdlh64 file (with a notepad) from the new version (Graphics folder) find the DEV number under windows 10 and copy the whole line.
7. Paste it under the Windows 7 section in the igdlh64 file of the old driver and correct the ikbl win10 with iskl win7 (known trick for 7th gen).
8. Copy all lines that include the 4-digit number from the igdlh64 file from the new driver and paste in the respective sections of the igdlh64 of old driver. In the end of the text, also add the name of the driver as a label, eg Intel UHD Graphics 620.
9. Install the modified old driver (win64_18.104.22.16878) and reboot.
10. After reboot. Copy the igdumdim32.dll file from the Graphics folder of the new version and paste it to the C:\Windows\SysWOW64 replace the existing files
This way, I get all resolutions, full brightness, colour, contrast etc control of the display, intel graphics control panel, full windows 7 effects (aero glass etc), but I dont actually get video support (apart from 3rd party software, like VLC/GOM player which even play 4K video smoothly), 3d applications are not functional, I dont get hardware acceleration etc. I concluded that the solution is to edit the igdumdim32.dll file, so that I copy elements from the new version to the old one. This way, theoretically, it should work. Anyone who has experience with driver and dll modification???