Jump to content
Clancy

Is my modded inf correct?

Recommended Posts

Hi, Masters,

 

i m trying to let my egpu working through modding the inf file.

My 660ti's device number is this

PCI\VEN_10DE&DEV_1183&SUBSYS_2843 1462&REV_A1

and i manged to add a few lines in the nvlti.inf file, cause my laptop is thinkpad...

i m not sure if i should mod this file or others either way it didnt work.

i added line below

[NVIDIA_Devices.NTamd64.10.0...14310]
...
%NVIDIA_DEV.1183.2843.1462% = Section021, PCI\VEN_10DE&DEV_1183&SUBSYS_28431462
%NVIDIA_DEV.1183.2843.1462% = Section022, PCI\VEN_10DE&DEV_1183&SUBSYS_28431462
[Strings]
...
NVIDIA_DEV.1183.2843.1462 = "NVIDIA GeForce GTX 660 Ti"

for some unknown reason it just didnt work........

Could you guys help me out,

this EXP thing is driving me crazy...

Share this post


Link to post
Share on other sites

The driver does not install without modding the .inf?

 

Usually desktop cards have their entries in nvdisp.inf.

Share this post


Link to post
Share on other sites

I would guess wrong file.  nvdispi might be possible too. But it might not be the nvcvi inf that we use for most mobile cards right now

 

 

Are you trying to use some riser card or cables on your laptop to run this card or some external solution  ?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By can rx
      Hello to all dear visitors, 
       
      I have been using Lenovo y510p notebook for two years but in games I think my graphic card is inadequate. After that I've bought Mini PCI-e EXP GDC and attached it to where the wireless card socket is.  However because it has x1 speed its performance is too low. Even though on tests rx460's ranks is low than rx480, it has more performance.
       
      In x1 PCI-e port, the performance is too low and inefficient. On GPUz programme, use of memory controller is 20% but use of GPU is 100%. I mean, I've been hooked to the x1 speed.
       
      Components : EXP GDC version 8.0 +450w PSU + rx480
       
      I've read all pages about ultrabay, I want to buy and to share in forum.
       
      If anyone has ultrabay to PCI-e port, I want to buy. Please help.
       
      Thanks for everything.
    • By PrecastFlame
      Hi, I'm having problems trying to connect a GTX 750 Ti to my Lenovo T420 using the dock EXP GDC Beast (express card version).
      My laptop: Lenovo T420
      RAM: 8GB DDR3
      CPU: Intel Core i5 2520M
      GPU: Intel HD Graphics 3000
       
      My problem is: if I plug the express card and I turn on the laptop it doesn't boot up and the screen becomes horrible, with coloured pixels and a sound like "bip-bip".
      If I try plugging the express card when the laptop is already turned on it sees the gpu, but if try installing the drivers I have to apply the modifies restarting the computer.
      I hope you understood my problem (I don't speak English very well).
      Please help me, It's making me crazy!
       
      EDIT: I didn't say that if I plug the express card when the pc is already turned on, in the device menager there is "Error 12" on the gtx 750 ti
    • By Kel
      I got the exp gdc beast 8.5 got all the connections right... laptop boots up... fans turn on the gpu.... device manager detects gtx 1060 with a “ ! “ in a yellow triangle. Now what to do.... i tried to do the bios mod.... but realised that i have 3.07 version. 
      Questions-
      1 is there any way to get this done without the mod?? 
      2 if mod is the only way... kindly help me with step by step instruction in laymans terms... i m not a techy... so i might not understand technical terms.... altho i am interested... but learning yet. Please help. 
    • By Rocketeer
      Hello,
       
      I have a lenovo y480 trying to set up exp gdc with mini pci-e. I followed the instructions to the letter and still my system does not detect it. graphic card i am using is a evga 1060 and windows 8.1   I am willing to upgrade to win 10 if that would make it easier, just looking for some guidance since i am a beginner at this.
       
                                                                                                                                                                                   Thanks
                                                                                                                                                                                         Tony
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.