The GPU works, The PSU works, The system works. [individually they all do work]
The system works perfectly fine without the WLAN card.
When i put the system to sleep and hotswap the mPCIe riser and WLAN press something on the keyboard.. Restarts.
Will shutdown in roughly 27 seconds for those 27 seconds it works just fine like how it normally would on external monitor.
When i shut it down and plug the riser and switch it on, same story. 27 seconds.
I don't even see a error. I get to login screen directly. I used DDU already.
I timed it. no matter what i do if i use the eGPU, External monitor it restarts instead of pause-play. I have 27 seconds.
Hey guys, I am Grga and i am new here. I rarely use forums but i am desperate in this case.
So, as i have seen many of you have had the issue with obsolete BIOS versions for clevo P7xxZM machines,
So i would like to hear your experiences and how you went about it.
I have recently bought an ssd Samsung 970 PRO NVMe M.2. From which i would like to boot the windows10.
Little did i know that there was no support for that kind of protocol in the BIOS or that there is such thing as UEFI (for which i am still not sure what that is exactly, except some kind of successor of BIOS).
So i did a bit of research and updated my Bios and ec to 1.03.15 and 1.03.09 respectively for which i understand is the last available official release. I changed to uefi mode with secure boot disabled etc... in short i did everything that my (limited) knowledge about these things allowed me to do (and the sweat of excitement and fear when i was flashing the bios for the first time in my life). But, alas, it all yielded no success, and now i am lost. I have really no idea what to do, and whom to ask for help except for you guys here. The only thing that i understand worked for some of you is when you mentioned a wizard named @Prema so therefore i will try to do the same....
I got the exp gdc beast 8.5 got all the connections right... laptop boots up... fans turn on the gpu.... device manager detects gtx 1060 with a “ ! “ in a yellow triangle. Now what to do.... i tried to do the bios mod.... but realised that i have 3.07 version.
1 is there any way to get this done without the mod??
2 if mod is the only way... kindly help me with step by step instruction in laymans terms... i m not a techy... so i might not understand technical terms.... altho i am interested... but learning yet. Please help.
I've a really weird problem. My laptop has started beeping when use nvidia gpu yesterday. I dissambled my laptop and tried to plug out every single hardware and test them one by one. There's 22 beeps and equal interval beetween them. It goes shutdown after that 22 beeps.
My laptop is Clevo W650SJ and it uses Nvidia 840M gpu. That problem isn't causing because of windows or installed driver cos i tried to reinstall windows but it started to beeping when w10 installer check devices. Also I've bios password on startup , if i don't type password and hit the enter , it starts beeping after 10-15 sec. Also fan speed goes up to maximum and it doesn't slow down untill i shut it down or shutdown itself.
If i use any program or run a game which uses nvidia gpu , it starts beeping but if i close the game on first beeps , beeping is stops. But fan speed still maxiumum until i shutdown to pc.
I am looking a way to fix it. I didn't make any changes on my pc before than this problem.