Jump to content

Request for Barebone MS-16F4 - GTX 970M 3GB vBios Unlock


Inverse26

Recommended Posts

 Hi @ all,

 

I just tried to find an unlocked vBios for my GTX 970M - without any success.

 

All I found was:

http://forum.notebookreview.com/threads/ocmod-peformance-vbios-for-ge72-6qf.804468/#post-10520502

 

The problem is that I am not able to flash that vbios --> always getting the error (even if the cards seems to be the same):

 

NVIDIA Firmware Update Utility (Version 5.227)

************* Mod *************

 

Checking for matches between display adapter(s) and image(s)...

Adapter: GeForce GTX 970M     (10DE,13D8,1462,112D) H:--:NRM S:00,B:01,PCI,D:00,F:00

WARNING: Firmware image PCI Subsystem ID (1462.116D)

  does not match adapter PCI Subsystem ID (1462.112D).

WARNING: None of the firmware image compatible Board ID's

match the Board ID of the adapter.

Adapter Board ID:        E90B

Firmware image Board ID: E910

ERROR: Board ID mismatch

 

So I'd like to request an unlocked vBios (if possible with the same settings than that one above) for this Laptop's GPU;

 

Laptop: Barebone MS-16F4

GPU: 970M 3GB

 

Attached is the stock vBios dumped by me using NVFlash.

 

Many thanks in advance!

GM204.rom

 

EDIT: @Klem: Could you maybe help me out?

Edited by Inverse26
Added Info
Link to comment
Share on other sites

  • Bios Modder
On ‎21‎.‎09‎.‎2017 at 3:16 PM, Inverse26 said:

 Hi @ all,

 

I just tried to find an unlocked vBios for my GTX 970M - without any success.

.....

 

EDIT: @Klem: Could you maybe help me out?

Hi!

Yes of course. Just check your PM.

Link to comment
Share on other sites

  • 1 month later...
On 9/23/2017 at 10:12 AM, Klem said:

Hi!

Yes of course. Just check your PM.

Hey @Klem! I'm new here, but I've glanced through the forum and I just want to thank you for your service. It really seems like you're the guy to go to when it comes to unlocking a vBios.

 

I own a barebones MS-16F4, just like the OP of this post, also with a 970m GTX 3GB. I was wondering if you could PM me and help me out, with how I could go about unlocking the vBios for my GPU. And if it isn't too much of a problem, also maybe explain a bit what/how I could tweak it to get the most out of my GPU.

 

I've attached my GPU-Z info and also the my stock vbios dumped using nvflash.

 

Any help would be greatly appreciated. Thanks a lot! Cheers.

 

 

gpu.PNG

vbios.rom

Link to comment
Share on other sites

  • Bios Modder
3 hours ago, Sarafan said:

Hey @Klem! I'm new here, but I've glanced through the forum and I just want to thank you for your service. It really seems like you're the guy to go to when it comes to unlocking a vBios.

 

I own a barebones MS-16F4, just like the OP of this post, also with a 970m GTX 3GB. I was wondering if you could PM me and help me out, with how I could go about unlocking the vBios for my GPU. And if it isn't too much of a problem, also maybe explain a bit what/how I could tweak it to get the most out of my GPU.

 

I've attached my GPU-Z info and also the my stock vbios dumped using nvflash.

 

Any help would be greatly appreciated. Thanks a lot! Cheers.

 

 

gpu.PNG

vbios.rom

 

Done. Check PM.

Link to comment
Share on other sites

  • 1 year later...
  • Bios Modder
9 hours ago, javers said:

Hi @Klem

 

Sorry to dig up an old thread but could you send me a copy of the this unlocked vbios for the 970m 3GB E90B board id.

 

Many Thanks,

 

Javers

Hi!

Send? No, i have not such a vbios. You can send me your original stock vbios, i can take a look.

Link to comment
Share on other sites

  • 4 months later...
  • 3 months later...
  • Bios Modder
8 minutes ago, MustangBR said:

Hi @Klem

Can you help me to unlock my vBios?

 

I tried to unlock with MaxwellBiosTweaker, but could not ... Can not exceed 1038MHz.

 

Thanks!!

 

GM204.gif.94d7606d4dbc8347f2fa58496d19d3d9.gif

GM204.rom

Hi!

If you want to overclock your card, you can do it with Nvidia Inspector utility, or with MSI Afterburner.

Link to comment
Share on other sites

5 hours ago, Klem said:

Hi!

If you want to overclock your card, you can do it with Nvidia Inspector utility, or with MSI Afterburner.

 

Ok ok! Thank you!

 

It is stable at 1124MHz, 0.9650VDDC, 70ºC, Memory at 2772MHz.
Got 11fps on Shadow of the Tomb Raider

 

Do you think this setting safe for extended use?

Link to comment
Share on other sites

  • 6 months later...
  • Bios Modder
5 minutes ago, Weasel Cat said:

 

Dear Klem

 

Can you please send me the latest VBIOS for my below graphic card ?

 

Thank You Very Much for your time and patience

 

Kind Regards

Hi!

Send? No, i have not such a vbios. If you want, I can prepare unlocked vbios for you.

You can send me your original stock vbios, i can take a look.

Link to comment
Share on other sites

  • 8 months later...
  • 1 year later...

Hi,@Klem!

 

I`m new here,but I know your service and I just want to thank you for that.

I got a MSI GE726QF with a GTX970M 3GB(non-mxm),but I can not find unlocked vBios.

Can you help me unlock my vBios?

 

Thanks a lot!!!!!

Here is my original stock vBios:https://drive.google.com/file/d/1KsDzB8G3DjY37mG0jc0E9ziyG61Ow4at/view?usp=sharing

Link to comment
Share on other sites

  • Bios Modder
3 minutes ago, Senbascira said:

Hi,@Klem!

 

I`m new here,but I know your service and I just want to thank you for that.

I got a MSI GE726QF with a GTX970M 3GB(non-mxm),but I can not find unlocked vBios.

Can you help me unlock my vBios?

 

Thanks a lot!!!!!

Here is my original stock vBios:https://drive.google.com/file/d/1KsDzB8G3DjY37mG0jc0E9ziyG61Ow4at/view?usp=sharing

Hi!

Ok. Check PM.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.