I'm sorry for making another thread just for this but I really wanted to pick your brains on this!
I have an m15x with a 770m running windows 7 and everything works. Rock. Solid. I'm pretty happy with it. Since windows 7 is on it's way out, I would like to upgrade to windows 10. Now I've looked into it before and had a really hard time getting the 770m to behave nicely and had all these issues with green/yellow/pink screens and I remember it being a miracle I got it to work on 7 as good as it does.
My question is how well does the 970m install vs the 770m - particularly on windows 10? I would buy it in a heartbeat if it makes the install less tedious with the colored screens and all that. Especially if all the functions work on it! I have been searching the internet and I cannot find nearly as many problems with the 970m as I could with the 770m, or am I just not looking in the right places?
Thanks a million!
In this thread you can post your requests for Lenovo ThinkPad T440p / T440s.
If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
For creating bios backup and to flash bios mod, you must use any SPI programmer (like CH341A programmer) and a SOIC8/SOP8 test clip!
Just dump your Bios using any SPI programmer (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
Hi, new in the forum, trying to find some help, someone points me in the right direction.
Long story short: Clevo p170hm3 from 2011, gtx485m card dead, new card from ebay, it doesn't works correctly.
I've read about Clevo brand signature, Prema posts about 3dvision license between hardware from ir emitter, gpu and motherboard, Prema modified bios to get gtx580 working too with 3dvision, svl7 (now retired) vbios, and more, but basically, I'm still confused enough to know what should I do and what are the right steps to get my p170hm3 back to life.
Last card I could buy was a gtx675m, but I couldn't find vbios (original, not-moded from Clevo), the Clevo vbios list "jumps" from gtx670m to gtx680m with no mention to gtx675m , and I read some posts about convert a 675 to a 580 and viceversa, I think it was changing some physical resistances, and some number in vbios, but I'm not modder, no idea really about.
So, What I should do?. Sell 675m and try to get a gtx580m, and use original clevo vbios on it?, it will work, or my computer won't be able to use it?. I bought my computer before gtx580m was released... I would need to update bios to get it working?
Or unlock graphic card restrictions with the latest prema bios mod (if that is possible). There is some chance get 675m working?
Are all mods and files I need in this forum? (ask this because I can't see/access the files, because I'm new in the community)
What options I really have?.
I hope someone can clarify me a little bit this situation.
Thanks in advance.
In this thread you can post your requests for Lenovo Y50-70, Lenovo Y70-70, Lenovo Z50-70, Lenovo Z70-70, Lenovo G50-70, Lenovo G70-70.
If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or unlocked vbios for overclock NVIDIA card, then you can post your request in this thread. Also, if you have a problem with fan pulsating/clicking on any modified bios then you can post your request in this thread.
The flashing procedure include two steps:
1. Flash main system bios.
2. Flash EC firmware.
Hello, I'm on an alienware m17 r4 and am trying mod my vbios for a 970m 3GB msi. I've managed to get the max boost with an increase in voltage, however I believe my voltage settings maybe unstable. When attempting to load programs capable of high gpu usage capabilities, the gpu begins to become pretty unstable. would anyone be able to provide assistance? I have both my edited and original roms as well.
I'm not sure how to delete this thread but disregard this please. I've figured out the issue.