Jump to content

ACER E5-553G, E5-523G Request for AMD-V Unlock


Klem

Recommended Posts

  • Bios Modder
11 minutes ago, Inder said:

Thanks. It worked this time.

I am unable to upload the file here.

Which line content should i send you?

 

Hi!

You can upload your file vars.txt into any fileserver (for example https://www.sendspace.com  ) and send me the link.

Edited by Klem
Link to comment
Share on other sites

  • Bios Modder
Link to comment
Share on other sites

  • 2 weeks later...
  • Bios Modder
7 hours ago, SexyPantsu said:

Hello man, ate shit from acer guys, hope you'll finally help to get the vm stuff done...

this is my vars https://drive.google.com/file/d/1dUd-Lmfi0Qz9WaZ1cvGyYPgqjPNJ-Okj/view?usp=sharing

 

Hi!

Ok. Check your Inbox.

Link to comment
Share on other sites

  • 4 weeks later...
  • Bios Modder
9 hours ago, Arnaud said:

Good evening can you activate AMD-V on my Packard Bell EG70_KB CPU: AMD A4 / A6 Bios: Insyde corp. V.1.09 05/12/2013 thank you very much. Var.txt: https://drive.google.com/file/d/1bLsv3iMdHDaNoX3dD4PmaFVlYigQTPlH/view?usp=sharing

Hi!

Ok. Check PM.

Link to comment
Share on other sites

  • 1 month later...
  • Bios Modder
56 minutes ago, TJokro said:

Hello Mr. Klem, Happy New Year!

Finally, i found this thread!

I have the same problem and here is my vars file:

https://drive.google.com/file/d/1o5Ojk2NyQ0nqQGFxb5EpGvq1yQoe4qQz/view?usp=sharing

I really need your help Mr. Klem

Thank you in advance for your help

 

Hi!

Ok. Check PM.

Link to comment
Share on other sites

  • 4 weeks later...

Hi, I have an Acer E5 553 I'm trying to enable AMD-V, because I try tu run virtualbox in ubuntu 20.04 and I keep getting the following message:

 

"AMD-V is disabled in the BIOS (or by the host OS) (VERR_SVM_DISABLED).

 

Result Code:

NS_ERROR_FAILURE (0x80004005)

Component:

ConsoleWrap

Interface:

IConsole {872da645-4a9b-1727-bee2-5585105b9eed}"

 

 

Here is my vars.txt file:

vars.txt

 

Thank you in advance.

Link to comment
Share on other sites

  • Bios Modder
49 minutes ago, MWA said:

Hi, I have an Acer E5 553 I'm trying to enable AMD-V, because I try tu run virtualbox in ubuntu 20.04 and I keep getting the following message:

 

"AMD-V is disabled in the BIOS (or by the host OS) (VERR_SVM_DISABLED).

 

Result Code:

NS_ERROR_FAILURE (0x80004005)

Component:

ConsoleWrap

Interface:

IConsole {872da645-4a9b-1727-bee2-5585105b9eed}"

 

 

 

Here is my vars.txt file:

vars.txt

 

Thank you in advance.

Hi!

Ok. Post here your screenshot in SecurAble utility:  https://www.grc.com/securable.htm

Link to comment
Share on other sites

  • Bios Modder
12 minutes ago, DisaV said:

Hi, Klem!

The same problem with Acer E5-553G-12HY...

After the Win10 update, VMWare Player fails to start a virtual machine, displaying a message " This host supports AMD-V, but AMD-V is disabled".

Here is my vars.txt.

Thanks in advance!

Hi!

Ok. Check PM.

Link to comment
Share on other sites

Hi, Klem !
This is my vars.txt file link:
 

https://www.sendspace.com/file/80zgce
 

Bios version: 2.04
Aspire E1-421
I need help unlocking the virtualization to run a VM on antiX(linux). 

 

PS: After I used the command:


H2OUVE.exe   -gv   vars.txt
 

My keyboard and mousepad stopped working completely.
 

I could still use the PC with a connected mouse and the windows virtual keyboard(I even upload the file throw it), I shutdown normally throw windows menu but it didn't shutdown completely. It appeared to shutdown but the power light it is still on and looks like the monitor is "bright" like totally black but on(Like the difference between off and on but with completely black image), also even if I press the shutdown button for 5s(forced shutdown) it doesn't(first time in my life). I will wait the battery to run off to check if it will turn on again after that. 

<Edit>
After the battery run out, I just turned it on again and it is working as usual keyboard and mousepad working fine.  
</Edit>

 

Also if you do not mind a few questions(If you do mind or you don't have a lot of free time just ignore the rest):
I would like to learn how to do it myself so...
 

Like where do I find the EFI-table with available settings for my notebook ?
The EFI-table is bios related or notebook related ?
And from the EFI-table how do I get witch setting do I need to change in the vars file(I checked you first post and I have no clue) ?
If you do not have the free time you can also just point me a direction so I can follow-up like a tutorial or something, everything that I find about EFI-tables is in chinese, So I don't even know what it is. 

Ps:
I checked before with Leomoon if my cpu is able to do virtualization and it is, it is also listed on your post. 

I also found this manual 
https://www.manualslib.com/manual/483151/Acer-Aspire-E1-421.html
on section 4-15

SMM     ---    0xA0 - 0xBF

on section 4-22 there is the 4-10 table witch shows the SMM something I don't know if it means something 
I don't know if this is important just assumed because: SVM =~= SMM

 

Edited by ArcaneHunter
Update on notebook status, working again.
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.