I am requesting your help. I have an Acer e5-523g, and I have applied the method with h2ouve mentioned in this forum to activate the amd-v feature, and it worked. But everytime on two, when the system was shutting down, whether intentionally or low battery, the virtualization was going back to deactivate. And I always repeated the same process. Until one day: when I enter in the cmd, everytime I tap “h2ouve -gv vars.txt” or “h2ouve -sv vars_mod.txt” it shows sth like:
Now parsing Variable Information...
GetLastError=0x2 Failed to get bios data!
Fail to get Variable Information
My problem is that I don’t really know what LoadDriverDevice means, and how to make it work
BAKED BIOS FOR TM, KM, DM, P6, P4 SERIES WITH MOST MENUS AND OPTIONS UNLOCKED PLUS OTHER MODIFICATIONS
I HAVEN'T BEEN ACTIVE IN A WHILE BUT I MIGHT FIND SOME TIME SOON TO WORK ON AND RELEASE NEW MODS.
I STARTED WORKING ON V3.0 A WHILE BACK WHICH WILL INCLUDE UPDATED UEFI DRIVERS, MICROCODE, BIOS SCREEN SHOT SUPPORT AMISCE SUPPORT(For some models) PLUS MORE.
ALL TM, KM AND DM SERIES ARE V2.0 AND NOW HAVE WINDOWS FLASHER INSTEAD, JUST EXTRACT AND RUN FLASH.BAT
WARNING! BIOS FLASHING IS RISKY SO MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE PROCEEDING.
FLASHING THE WRONG BIOS OR INTERRUPTING THE FLASHING PROCESS WILL BRICK YOUR SYSTEM!
USE AT YOUR OWN RISK!
TM, KM AND DM SERIES
P6 AND P4 SERIES