Jump to content
Sign in to follow this  
MetaBaron

Can't seem to fix error 43 (X220 / Exp GDC / GTX680 / Win10)

Recommended Posts

Hi All,


I'm trying to setup a eGPU rig -  but no matter what I do I seem to be running into the infamous error code 43.

 

My setup:

 

  • Thinkpad X220 i5 2.5GHz, 16GB ram (2x8GB @ 1600)
  • Modified 1.43 Bios
  • EXP GDC V8.4D PCI-express
  • Sparkle NVIDIA GeForce GTX680
  • Dell DA-2 power supply

 

Seemed like a common setup from what I could read before attempting the build, so I wasn't expecting any specific troubles. How wrong I was...

Steps I followed:

  • Connect GPU and power plug into GDC, plug express card in laptop while power off
  • Power on the laptop, GDC starts fine, generic VGA adapter is detected
  • Install nvidia drivers, reboot
  • Card shows up, but with error code 43

 

Sometimes I'd get a blue / black screen of death, and changing the PTD switch to 14s would fix this, but error 43 would still be present. In both cases, hot-plugging the card would work fine - it gets detected in the device manager, but the error would be still there.

 

I had a few times where I got error 12 instead, so I went to the BIOS and changed the TOLUD to 3GB as suggested in some online discussions. That fixed error 12 but would just show error 43 again after reboot.

 

I read it might be a driver issue (although people said it should happen only with the new 10xx series of cards), so  I tried several versions of the drivers: latest, 375.64, 372.70, 372.54, but with no luck.

 

Here's a list of other stuff I tried by reading about other people's successful setups / troubleshooting experiences and looking for error 43 related threads:

  • Setting PCIe Power Management off / on in the bios
  • Setting PCIe speed to gen1 manually
  • Enabling / disabling hotplugging for the pcie interface the card is installed in

 

But still no luck. Going crazy over this. Has anyone been in a similar position and can offer me advice? Thanks!

Edited by MetaBaron

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Sparkhunter
      Hi there guys,
       
      I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
       
      I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
       

       
      The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
       
      If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
       
      Thanks.
       
    • By Blocker35
      Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
       
      - MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
      - Razer X Core 
      - Apple TB3 to TB2 Adapter
      -  TB2 Cable (Cable Matters)
      - 23inch AOC External Monitor
       
      I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
      I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
      Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
    • By SnipeKing17
      The GPU works, The PSU works, The system works. [individually they all do work]
       
      The system works perfectly fine without the WLAN card.
       
      When i put the system to sleep and hotswap the mPCIe riser and WLAN press something on the keyboard.. Restarts.
      Will shutdown in roughly 27 seconds for those 27 seconds it works just fine like how it normally would on external monitor.
       
      When i shut it down and plug the riser and switch it on, same story. 27 seconds.
       
      I don't even see a error. I get to login screen directly. I used DDU already.
       
      I timed it. no matter what i do if i use the eGPU, External monitor it restarts instead of pause-play. I have 27 seconds.
       
      Need help!
    • By can rx
      Hello to all dear visitors, 
       
      I have been using Lenovo y510p notebook for two years but in games I think my graphic card is inadequate. After that I've bought Mini PCI-e EXP GDC and attached it to where the wireless card socket is.  However because it has x1 speed its performance is too low. Even though on tests rx460's ranks is low than rx480, it has more performance.
       
      In x1 PCI-e port, the performance is too low and inefficient. On GPUz programme, use of memory controller is 20% but use of GPU is 100%. I mean, I've been hooked to the x1 speed.
       
      Components : EXP GDC version 8.0 +450w PSU + rx480
       
      I've read all pages about ultrabay, I want to buy and to share in forum.
       
      If anyone has ultrabay to PCI-e port, I want to buy. Please help.
       
      Thanks for everything.
    • By PrecastFlame
      Hi, I'm having problems trying to connect a GTX 750 Ti to my Lenovo T420 using the dock EXP GDC Beast (express card version).
      My laptop: Lenovo T420
      RAM: 8GB DDR3
      CPU: Intel Core i5 2520M
      GPU: Intel HD Graphics 3000
       
      My problem is: if I plug the express card and I turn on the laptop it doesn't boot up and the screen becomes horrible, with coloured pixels and a sound like "bip-bip".
      If I try plugging the express card when the laptop is already turned on it sees the gpu, but if try installing the drivers I have to apply the modifies restarting the computer.
      I hope you understood my problem (I don't speak English very well).
      Please help me, It's making me crazy!
       
      EDIT: I didn't say that if I plug the express card when the pc is already turned on, in the device menager there is "Error 12" on the gtx 750 ti
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.