Managed to find a relatively cheap MSI 1070 on ebay, and after reading a few success stories that 1070's are compatible I decided to pull the trigger.
Modified the bottom case as per the photo on this FAQ page http://www.eurocom.com/ec/faqs(272)ClevoP150EM_SagerNP9150_XMG_P502_PRO. Things were going well until I went to screw the card down and felt some resistance.
Oops. Looks like that capacitor(?) with the blue on it *just* clashes with the card. Now what's weird is not all P150em motherboards seem to have this component on it - looking at replacements this component is not there. Also looking at the photos from this 1080m P150em mod (https://premamod.wordpress.com/2017/10/10/clevo-pascal-mxm-standard/), this component isn't there either. Does anyone know what this is, and if it can be removed? Or, if this could be taken off and shifted out of the way somehow, or replaced with a smaller equivalent...?
In my disbelief/annoyance/problem solving when trying to push it down, I did notice that the card has a surprising amount of flex in it and it *can* be screwed down almost completely to a level where I feel somewhat comfortable in doing... Though I'd rather not put this strain on the card if there is a way to avoid it.
Привет. Помогите, мне грустно.
Существует clevo p150em, недавно обновленный с 7970 до 8970 м (от 150 см)
Bios, R.2.0 / 1.02.17EC v3b / 1.02.11EC.
Когда он был установлен 7970 м, в BIOS на линии gpu это было 7970 м. После установки 8970m, NVIDIA пишет вместо 8970m.
Драйверы на 8970m не установлены, либо синий экран, либо ноутбук замерзает. Windows 10 1713.
Я пробовал разные версии драйверов, все равно. Что вы посоветуете?
8970m vbios VER015.041.000.000.044964 BR44964.009 it s DELL?
ps. when I bought 7970m for a place of 670m. At 7970m there was also a problem with the drivers, but I somehow skipped it.
Hi, I started overclocking my laptop. Initially, the graphics card provided 601 MHz at core (900 mV voltage) and 1400 MHz at memory. By moddig the bios through the Kepler Tweaker, it was possible to overclock to 944 MHz at core (925 mV voltage) and 2310 MHz at memory.
I want to reach 1 GHz by the core, but for this I need to raise the voltage. At a very high voltage, even without load, the fan will start to rustle, so I do not want to raise the voltage much.
But there is an idiotic problem. When the temperature of 60 degrees is used, the video card discards 25 mV. This is Nvidia`s feature . In the stock, it drops from 925 to 900, now from 950 to 925. I want 950 constantly, but it's impossible to make through Kepler Tweaker. I saw reports that svl7`s BIOS mod does not have this problem, but anyway I can not download it. So may be somebody know how make right vbios mod.
Please help me
I've flashed my Laptop clevo p150em with latest BIOS V 1.02.17 and EC/KBC V 1.02.11.
Now I want to reflash it again with latest original Eurocom bios
EC V 1.02.11EC
BIOS V1.02.17EC v3b GTX9
but there is a problem. I did everything according to the instructions, but after I ran step2.bat, the flashing process stoped itself and only the cursor was blinking in the lower corner (and nothing happened)
There is movie link: https://www.dropbox.com/s/0k1tqw3abwzmcpx/racer_p150em.mp4?dl=0
Generally I am not able to flash any other bios (the result is still the same)
Does anyone have any idea, how to solve it?
I also tried the following (unsuccessfully):
Remove system battery, disconnect adapter.
Disconnect CMOS battery, hold down Power Button for 45 seconds.
Thank you in advance for your help
PS: the reason why i want to flash it, is GPU upgrade (from AMD 7970M - bricked, to NVIDIA 970M)
I've got Windows 10 installed on my P150EM in one of my SSD and installed all the drivers that it required, but the THX software doesn't change the sound output. The software registers as usual and it detects de sound driver and all, but all the settings i change on the software doesn't change anything in the sound. I' got windows 7 installed on other SSD and on that OS, the THX works as it should be.
Is there any new version of the program or some new driver for windows 10 to make it work again?
Thanks in advance