Jump to content

Request - GTX 970M V-Bios (3072 MB and Non-MXM)


nebulaxis

Recommended Posts

  • Bios Modder
9 hours ago, nebulaxis said:

Hello. I have a Clevo P650SE laptop. It's GTX 970M (3072MB) and non-mxm.

Looking for vbios. Here is the data.

Have a nice day.

 

Adsız_Fotor.png

Hi!

Post here your stock vBIOS.

Edited by Klem
Link to comment
Share on other sites

5 hours ago, Klem said:

Hi!

Post here your stock vBIOS.


Hello. When i try the saving my vbios, i get an error "Bios reading not supported on this device".

-Disabled GPU from device manager
-Tried other versions of gpuz
-Tried nvflash

But non of these worked.

In the other hand, i know my vbios exactly. It's default Clevo/Schenker vbios. And also techpowerup has .rom file for that.

https://www.techpowerup.com/vgabios/165003/clevo-gtx970m-3072-140917  (This one is clevo)
https://www.techpowerup.com/vgabios/166517/schenker-gtx970m-3072-140917  (This one is schenker)


These two ones are exactly same vbios. And .rom files are here.

Schenker.GTX970M.3072.140917.rom

Clevo.GTX970M.3072.140917.rom

 

Edited by nebulaxis
Link to comment
Share on other sites

  • Bios Modder
2 minutes ago, nebulaxis said:

Is it custom vbios ?

I think that it's a custom vbios.

Edited by Klem
Link to comment
Share on other sites

  • Bios Modder
9 hours ago, runix18 said:

I dont think it's a custom vbios, from my knowledge custom vbioses ends with a "C",  this one end with a "D", drom what i can tell it's a stock vbios.

:)  Trust me, this is a modified vBIOS, i know this exactly. :) Also I know for sure who modified this vBIOS. :) 

Link to comment
Share on other sites

Hello   ; I have a question :

 i have a clevo p651se   with premabios  and i also have a vbios from prema for the gtx970m 3gb p6xxse , i follow the written instructions but each time i click on modme.bat i obtain ERROR: no nvidia display adapters found .

there is also in the folder  a SE970MOC.rom , can i flash it with an other tool ,  or can i use the vbios you gave the link above ?

and after that  , will i be able to change voltage gpu freq etc  with nvidia inspector , msi after burner or should i always flash the vbios to change them ?

 

edit : i found this

does this method still work ?

 

THanks in advance !

Edited by kogoro
Link to comment
Share on other sites

I succeeded  , just needed to deactivate gpu and reactivate it with immediately clicking on modme.bat , it worked smoothly  . now i can overclok the gpu as i wish with nvidia inspector  :)

  • Thumbs Up 1
Link to comment
Share on other sites

  • 1 year later...
  • 4 years later...
On 6/13/2017 at 10:00 AM, Klem said:

Just download it, and then flash it.

hey bro 
please i need unlocked vbios for my gtx97m
how can i post my stock vbios
also can someone instruct me through the procces of installing it cuz idk about it 
and 1 more question will it by any chance destroy my gpu?

Edited by bloody
Link to comment
Share on other sites

  • Bios Modder
4 hours ago, bloody said:

hey bro 
please i need unlocked vbios for my gtx97m
how can i post my stock vbios
also can someone instruct me through the procces of installing it cuz idk about it 
and 1 more question will it by any chance destroy my gpu?

Hi!

Ok. Check PM.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.