Jump to content
EwinRacing Flash Series Gaming Chairs
BAKED

BAKED unlocked and stock BIOS for CLEVO TM, KM, DM and P6/P4 series

Recommended Posts

 

Quote

 

BAKED BIOS FOR TM, KM, DM, P6, P4 SERIES WITH MOST MENUS AND OPTIONS UNLOCKED PLUS OTHER MODIFICATIONS

 5895ceb8cba9841eabab6072.png

NEW:

I HAVEN'T BEEN ACTIVE IN A WHILE BUT I MIGHT FIND SOME TIME SOON TO WORK ON AND RELEASE NEW MODS.

I STARTED WORKING ON V3.0 A WHILE BACK WHICH WILL INCLUDE UPDATED UEFI DRIVERS, MICROCODE, BIOS SCREEN SHOT SUPPORT AMISCE SUPPORT(For some models) PLUS MORE. 

ALL TM, KM AND DM SERIES ARE V2.0 AND NOW HAVE WINDOWS FLASHER INSTEAD, JUST EXTRACT AND RUN FLASH.BAT

WARNING! BIOS FLASHING IS RISKY SO MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE PROCEEDING. 

FLASHING THE WRONG BIOS OR INTERRUPTING THE FLASHING PROCESS WILL BRICK YOUR SYSTEM! 

USE AT YOUR OWN RISK!

TM, KM AND DM SERIES

Spoiler

P75XTM/1/G and P775TM/1/G NEW! 

P870TM/1/G NEW!

P870KM/1/G New version! 

P75XDM3/G P77XDM3/G P775DM3/G New version! 

P75XDM2/G P77XDM2/G New version!  

P870DM2/G P870DM3/G New version!

P75XDM/G P77XDM/G New version!

P775DM/G New version! 

P870DM/G New version!

Spoiler

(DOS NOT NEEDED FOR TM, KM OR DM) FIRST MAKE A BOOTABLE USB-DRIVE WITH DOS WHICH CAN BE DONE WITH RUFUS, COPY THE FILES FROM THE FOLDER BIOS TO YOUR USB-DRIVE AND RESTART AND ENTER BIOS BY PRESSING F2 IMMEDIATELY AT THE BOOT LOGO, IN THE BIOS MENU GO TO BOOT - UEFI SETTINGS AND DISABLE UEFI BOOT.

SAVE AND RESTART BY PRESSING F4 AND THEN PRESS F7 TO ENTER BOOT OPTIONS AND CHOOSE THE USB-DRIVE.

WHILE IN DOS FIRST TYPE BACKUPDOS.EXE TO MAKE A BACKUP OF YOUR CURRENT BIOS THEN TYPE BAKE.BAT AND WAIT UNTIL THE WHOLE PROCESS IS DONE.

RESTART THE SYSTEM AFTER FLASHING (IT MIGHT TAKE A WHILE FOR IT TO START UP) PRESS ENTER WHEN THE CMOS MESSAGES APPEAR AND THE SYSTEM WILL REBOOT, IF IT STARTS TO BEEP WITH THE FAN RUNNING AT HIGH SPEED REMOVE THE POWER AND RESTART.  

RE-ENTER BIOS AND LOAD SETUP DEFAULTS BY PRESSING F3, SAVE AND EXIT WITH F4. DONE!

 
  • Thumbs Up 14

Share this post


Link to post
Share on other sites

Thanks for your hard work! We look forward to seeing more creations from you. 

  • Thumbs Up 2

Share this post


Link to post
Share on other sites

First of all thx for the great work and for sharing these bioses with the comunity but can u be more precise of what actualy this bios contains and what is actualy unlocked? 

And what are the diference between your bios and Prema's for example.

Can u elaborate the cangelogs and the modifications a little bit, I am sure the comunity will apreciate it.

Tahnk you again for the hard work. 

Share this post


Link to post
Share on other sites
4 hours ago, runix18 said:

First of all thx for the great work and for sharing these bioses with the comunity but can u be more precise of what actualy this bios contains and what is actualy unlocked? 

And what are the diference between your bios and Prema's for example.

Can u elaborate the cangelogs and the modifications a little bit, I am sure the comunity will apreciate it.

Tahnk you again for the hard work. 

Hi! Alot of new menus and options are available and I've added the chipset menu and more to come in the updated versions later on. Because no one have made and released unlocked BIOSes for these models I decided to do it.

Edited by BAKED

Share this post


Link to post
Share on other sites
27 minutes ago, BAKED said:

Hi! Alot of new menus and options are available and I've added the chipset menu and more to come in the updated versions later on. Because no one have made and released unlocked BIOSes for these models I decided to do it.

That's briliant, yet again thank you again and I think it's a big thx in the name of the comunity aswel, you deserve a big thx from all the Clevo DM/KM users who did not had the posibility to buy from a Prema partner resseler.

One thing puzzless me, most of the bios upgrades on this models ive seen comes with a EC/BLK also, does your bios dont need one, or it works on the stock EC/BLK? Sorry for so many questions but I am just cautios to not brick my machine.

THX

Edited by runix18

Share this post


Link to post
Share on other sites
2 minutes ago, runix18 said:

That's briliant, yet again thank you again and I think it's a big thx in the name of the comunity aswel, you deserve a big thx from all the Clevo DM/KM users who did not had the posibility to buy from a Prema partner resseler.

One thing puzzless me, most of the bios upgrades on this models ive seen comes with a EC/BLK also, does your bios dont need one, or it works on the stock EC/BLK? Sorry for so many questions but I am just cautios to not brick my machine.

THX

 

It will work just fine without flashing the EC, but you can upgrade it if you want to, I might include it in the flash later on for people who want it.

Share this post


Link to post
Share on other sites

I have a Clevo P870DM-G with bios version 1.05.07TCPS and EC 1.05.03. Will it be ok to flash your bios like this? Or do I need and updated EC?

Edited by runix18

Share this post


Link to post
Share on other sites
1 hour ago, runix18 said:

I have a Clevo P870DM-G with bios version 1.05.07TCPS and EC 1.05.03. Will it be ok to flash your bios like this? Or do I need and updated EC?

It will be just fine :)

Share this post


Link to post
Share on other sites

Just flashed your bios and I can confirm it works, no errors, no boot fails, no heart atack:hyper:(thx for that), the one ting I couldn't work out it is that it does not keep the fast boot option to enable, it always goes disable after restart (booting on pure Uefi from samsung nvme drive formated as GPT)

Edited by runix18

Share this post


Link to post
Share on other sites
35 minutes ago, runix18 said:

Just flashed your bios and I can confirm it works, no errors, no boot fails, no heart atack:hyper:(thx for that), the one ting I couldn't work out it is that it does not keep the fast boot option to enable, it always goes disable after restart (booting on pure Uefi from samsung nvme drive formated as GPT)

If you want to keep the Fast Boot option to enable always after restart, just flash this:

 

BIOS.rar

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

It works, thx and please keep us updated when you add more features to this bioses, or any other tweaks or fixes.

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Hi...

Any chances for a bios mod for P670 RS-G?

I've been waiting and trying to reach Prema for ages now...to no avail...

Share this post


Link to post
Share on other sites
4 minutes ago, Trooph said:

Hi...

Any chances for a bios mod for P670 RS-G?

I've been waiting and trying to reach Prema for ages now...to no avail...

I'll upload it in the morning, pm me if I forget! :)

Edited by BAKED

Share this post


Link to post
Share on other sites

Aw man...i for some reason i cant download it... download link throws an error at me that something went wrong

Share this post


Link to post
Share on other sites

Hey guys i have Clevo P670RP-6G (sticker under)

and CPU-Z in mobo tab showing me P65_67RSRP which bios i could eventually download/Flash?

I have i7 6600HQ and 1060 6gb. 

Share this post


Link to post
Share on other sites
On 2017-06-16 at 11:53 PM, Magru said:

Hey guys i have Clevo P670RP-6G (sticker under)

and CPU-Z in mobo tab showing me P65_67RSRP which bios i could eventually download/Flash?

I have i7 6600HQ and 1060 6gb. 

:)

https://www.techinferno.com/index.php?/files/file/110-bios-for-p6xxrsg/&do=download&csrfKey=8de190a2993d130fd93daea0be124a46

Edited by BAKED

Share this post


Link to post
Share on other sites

Hi! I am new here, what are the main features of your unlocked bios? specially for p870dm-g? Any reply will be highly appreciated. Thanks.

Hi! I am new here, what are the main features of your unlocked bios? specially for p870dm-g? Any reply will be highly appreciated. Thanks.

Share this post


Link to post
Share on other sites
42 minutes ago, jamesrh305n said:

Hi! I am new here, what are the main features of your unlocked bios? specially for p870dm-g? Any reply will be highly appreciated. Thanks.

Hi! I am new here, what are the main features of your unlocked bios? specially for p870dm-g? Any reply will be highly appreciated. Thanks.

I've added the chipset menu and unlocked most of the other menus. That's about it at the time but I'm working on some stuff to come. :) 

Edited by BAKED
  • Thumbs Up 1

Share this post


Link to post
Share on other sites
4 minutes ago, BAKED said:

I've added the chipset menu and unlocked most of the other menus. That's about it at the time but I'm working on some stuff to come. :) 

Thanks. I have P870dm-g (XMG u726) can I flash this bios? with my current EC?

Share this post


Link to post
Share on other sites
3 hours ago, jamesrh305n said:

In this modded bios? can the integrated gpu can be activated in p870dm-g?

No it can not!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Krak
      Hi everyone, I have a problem. I need to unlock the bios settings because I only have basic functions and I need to increase the memory of VRam. Sorry if I posted a post not in this topic.
    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad X240.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden advanced menus and settings in bios setup menu, or upgrade to new display (with brightness control), then you can post your request in this thread.
      Important!
      For creating your personal bios dump and to flash your bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/itm/USB-Programmer-CH341A-Series-Burner-Chip-24-EEPROM-BIOS-Writer-25-SPI-Flash-AU/153117073868?epid=577511738&hash=item23a67d21cc:g:XKEAAOSw5UdbW-iL
       
      https://www.amazon.com/Parts-tower-CH341A-Programmer-Software/dp/B01FVVHCVC/ref=sr_1_4?ie=UTF8&qid=1522179315&sr=8-4&keywords=ch341a&dpID=51BO7eGgO5L&preST=_SY300_QL70_&dpSrc=srch
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/MAUSAN-Socket-Adapter-150MIL-205MIL/dp/B06ZYSNJF3/ref=pd_sbs_21_3?_encoding=UTF8&psc=1&refRID=XM79QJWGED6B4K2VEZDJ
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
    • By AMV
      Hello to all big format laptop users!
      I`ll try to make it as short as possible. I have the Alienware M18X R1 for about 7years, i think. It was a problematic machine all the time. But during warranty period local support fixed everything super fast and free of charge :). I even upgraded from gtx 580m sli to gtc 780m sli. And made primary hdd samsung evo ssd. Unlocked Bios. Power brick i changed 3 times by now. Battery once. And 6moths ago one of the long time ago installed 780m died ( started with artifacts on screen then refused to boot windows). Replaced that and was as happy as ever. The machine kept working stable and i pushed all i could get from it in reasonably modern titles. Even tried RDR2 on default settings, gave me 17fps :). Not sure if SLI is supported for that game. The point is it was running fine for last 6 months.
      What happened:  Gaming as usual, room temp 23C. After around 2hr suddenly black screen. The laptop switched off by itself.
      What i check: First checked power brick. Green light off. Unplug from wall and laptop. After plugging in wall green light back on. Connect laptop light off.
      Next: Tried take out battery, unplug. And hold the PWR button for 1 min. Try to start on battery - nothing. Plug in - green light off again.
      Later: after some googling found that need to try to remove video cards. Done that. OK Nice! Plug in power and it starts as nothing happened on the integrated intel video.
      Found out that i one of the video cards is plugged in that triggers the power brick to trip. (the original upgrade 780m from years ago). 
      Start with GPU: Insert the other one in its slot. Systems start. But immediately i notice there`s no video drivers. OK i think reinstalling and job done. Drivers reinstalled, asked for restart. After restart nothing. Still no driver.
      Windows device manager: This is bogging me. it shows that i have 670M instead of 780m. Windows gives Code 43 Error.
      BIOS: I go into bios just to find that that it has reverted back to A05 (hows that possible?). And its so limited that i cant even choose witch video card to use. But it detects nVidia GFX.
      How to get at least my single 780M to be working?! Update bios again to unlocked? Did this event fry Vbios on my other card maybe?
      System: m18x R1
      SLI gtx 780m
      Unlocked bios (before event)
      nvidia driver 443.x(or there about)
      Win: 7, 64bit
    • By PepoJ
      Hello there!
      I am new on the forum. I'd need some help. I own a lenovo ideacentre t540-icb g, and i would need to unlock all the options in my bios, especially overclocking and thermal configuration. I tried with both amibcp and mmtool, but i didn't succeed (Error 18).
      I wonder if you could help me or give me some advice.
      Thanks in advance.
    • By Qvixot
      Hello everyone! First of all sorry if this isn't the correct forum to post this.
      I bought a laptop few days ago. The laptop is Sager P150EM.
      Cpu:i7 3610qm 
      Gpu: amd hd 7970m
      Ram: 8gb
      Os: windows 8.1 pro
      So my problem is that everytime i install the amd driver after the intel driver my laptop freezes or gets a bsod or something that stops it from working. Any help would be appreciated. I saw somewhere something about vbios does this matter anywhere?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.