I got the exp gdc beast 8.5 got all the connections right... laptop boots up... fans turn on the gpu.... device manager detects gtx 1060 with a “ ! “ in a yellow triangle. Now what to do.... i tried to do the bios mod.... but realised that i have 3.07 version.
1 is there any way to get this done without the mod??
2 if mod is the only way... kindly help me with step by step instruction in laymans terms... i m not a techy... so i might not understand technical terms.... altho i am interested... but learning yet. Please help.
I have several questions on upgrading my M18X R2.
My rig's GPU is 680m and video ram is 2GB. It's a relic :p So I will change it to 980m.
1. Is it working on windows 7? (If it works, legacy or UEFI mode?)
2. Is 980m /w G-sync compatible with my rig?
3. Are there any compatibility issues with M18X R2 and Windows 10?
I tried to find useful information far as I can do, but my English ability sucks :S
Guys, please help me!
I have a Clevo P370EM3 laptop with a pair of GTX 680Ms in SLI mode and have never been able to get Linux to work properly with full acceleration and without tearing. I have tried every xorg config I can find, and even all the modifications from the nvidia configurator to no avail. Has anyone been able to get these things to work 100% in Linux? I have typically used ubuntu based distros, including Mint, and every available driver version from the repositories, but can never get it to work quite right.
Thanks for any help anyone can provide. It is killing me to run Windows on this machine because of these issues, and I am almost to the point of installing the inferior 7970 cards.
Have a great day