Jump to content
Sign in to follow this  

Recommended Posts

Hi All, We can Unlock the last bios and vbios for ovc the gtx950m of Asus N552VX ? would  nice!

 

Specification Notebook

Backup bios with afuwinx64

 

Thanks in Advance :)

 

If i try to get a backup  bios of gtx950M i get this error:

(c) 2017 Microsoft Corporation. Tutti i diritti sono riservati.

C:\WINDOWS\system32>cd C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64

C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>nvflash -b backupbios.rom

NVIDIA Firmware Update Utility (Version 5.287.0)
Modified Version By Joe Dirt

Adapter: GeForce GTX 950M     (10DE,139A,1043,1C9D) H:--:NRM S:00,B:01,D:00,F:00


WARNING: Debug port will be disabled during EEPROM access.

The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.

 Command failed to complete mailbox0 = FFFFFFFF
Command id:000A Command: NV_UCODE_CMD_COMMAND_PREP failed
Command Status:NV_UCODE_CMD_STS_NONE
Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT
Identifying EEPROM...
 Command failed to complete mailbox0 = FFFFFFFF
Command id:0002 Command: NV_UCODE_CMD_COMMAND_EID failed
Command Status:NV_UCODE_CMD_STS_NONE
Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT

ERROR: Error: Display adapter's EEPROM ID process failed

C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>

 

Edited by Steppdroid

Share this post


Link to post
Share on other sites
23 hours ago, Steppdroid said:

Hi All, We can Unlock the last bios and vbios for ovc the gtx950m of Asus N552VX ? would  nice!

 

Specification Notebook

Backup bios with afuwinx64

 

Thanks in Advance :)

 

If i try to get a backup  bios of gtx950M i get this error:


(c) 2017 Microsoft Corporation. Tutti i diritti sono riservati.

C:\WINDOWS\system32>cd C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64

C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>nvflash -b backupbios.rom

NVIDIA Firmware Update Utility (Version 5.287.0)
Modified Version By Joe Dirt

Adapter: GeForce GTX 950M     (10DE,139A,1043,1C9D) H:--:NRM S:00,B:01,D:00,F:00


WARNING: Debug port will be disabled during EEPROM access.

The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.

 Command failed to complete mailbox0 = FFFFFFFF
Command id:000A Command: NV_UCODE_CMD_COMMAND_PREP failed
Command Status:NV_UCODE_CMD_STS_NONE
Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT
Identifying EEPROM...
 Command failed to complete mailbox0 = FFFFFFFF
Command id:0002 Command: NV_UCODE_CMD_COMMAND_EID failed
Command Status:NV_UCODE_CMD_STS_NONE
Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT

ERROR: Error: Display adapter's EEPROM ID process failed

C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>

 

Hi!
Send me your file backup of bios. I'll look at it.

For creating backup of bios you can use attached program. Unzip attached archive directly on the Desktop and run the program as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Send me this archive "results" via PM.
http://www11.zippyshare.com/v/ul5knVKr/file.html

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
On 24/4/2017 at 9:29 AM, Klem said:

Hi!
Send me your file backup of bios. I'll look at it.

For creating backup of bios you can use attached program. Unzip attached archive directly on the Desktop and run the program as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Send me this archive "results" via PM.
http://www11.zippyshare.com/v/ul5knVKr/file.html

Hi, Thanks!! I send you a PM

Edited by Steppdroid

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By ounces
      After spending significant time and effort to obtain "DC" screen for 8770w (which is essentially a regular IPS panel with fancy board that converts 8bpc LVDS to 10bpc DP), I have finally got and installed one. All works great, except of the one problem...

      It has pretty bad banding / posterization in lower shadows. I have tried profiling it in different modes (full range, sRGB, rec709) - issue persists, and it indeed shows only in the lowest part of the characteristic curve. Mids and highlights are represented fine and show low deviation from reference values.

      GPU is HP K4000M, Nvidia drivers installed "as it is", video-card is identified without a hitch.
      Banding was not present with the original TN panel using the same GPU.
       
      While checking a software side, I have noticed that Win10 has bit depth set to 8-bit...
       

       
      My initial reaction was, - "Easy, let's change it in `nvidia-settings` and we're all set":

      ...but that would be too easy, right? After selecting 10bpc and clicking "Apply" screen went off and back on, only to show that depth stayed at 8bpc. Repeating the above few times yielded exactly the same result and I'm not in a hurry to meet a cliched (and laymen) definition of insanity.
       
      Let's check GPU-Z. So far so good, nothing unusual. Notice the highlighted BIOS version and subvendor string:
       
      Time to delve into other tabs. We are running WDDDM v2.4 which supports GPU dithering, but hey... BIOS version has changed!
       
      Briefly back to `nvidia-settings` to check what is reported by vendor's own utility:

       
      So far, we have two strings for BIOS version:
      80.04.5A.00.02 (let's call it an "A") 80.4.33.0.37 (let's call it a "B")  
      Notice how 2nd one seems to not follow hexademical notation. Lastly, "NVIDIA BIOS" drop-down, reports "A" version:
       
      ...and monitor section which confirms that rig is indeed capable of 10bpc, but currently running at mere 8bpc:

       
      Windows "Adapter settings", reports version "B". It's 2019, diversity is a must.

       
      "NVidia inspector" is of the same opinion:

       
      Now, let's use some seriously legit tools and check-in exported BIOS file in `nvflash`:

       
      Here we have two three interesting findings:
      Reported vendor is Dell, not an HP. See this link for details. BIOS version is back to "A". Have I already mentioned diversity? MXM module uses MX25L2005 flash storage in WSON-8 packaging. If things go real nasty, we should be able to rescue a patient via Pomona clip and external programmer.  
      Loading the same file in "Kepler BIOS tweaker" confirms the facts:

       
      EDID settings, courtesy of NVidia Control Panel. Hex dump can be found at the bottom of this post.
      ...Shall I be worried about "60.02Hz" refresh rate?
       
      To summarize:
      Why two different BIOS versions are reported? Anything to do with UEFI (e.g. HP is sideloading its own during boot)?.. Why two different vendors reported? As far as I remember, this is branded HP GPU. Where to get "clean" BIOS of K4000M for future experiments? Ideally from 8770w equipped with "DreamColor" panel from a factory.  
      Link to the dumps, BIOS ROM and monitor EDID: https://mega.nz/#F!zGgRmQIL!9q2QFZtHuK2RQ-WHXMA4Mg (also attached to this post)
      K4000M.zip
    • By Blocker35
      Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
       
      - MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
      - Razer X Core 
      - Apple TB3 to TB2 Adapter
      -  TB2 Cable (Cable Matters)
      - 23inch AOC External Monitor
       
      I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
      I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
      Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
    • By BAKED
      Hey y'all! I'm planning on releasing BIOS mods for the newer MSI laptops.
      So I'm looking for some testers to evaluate my mods and give input.
      If you're interested just PM me and we'll take it from there 
    • By BAKED
      BAKED BIOS FOR TM, KM, DM, P6, P4 SERIES with most menus and options unlocked. 
      THESE BIOS MODS ARE ONLY FOR PEOPLE WHO KNOW WHAT THEY ARE DOING!
       
       
       
      NEW: 
      I'M CURRENTLY WORKING ON V3.0 WHICH WILL INCLUDE UPDATED UEFI DRIVERS, MICROCODE BIOS SCREEN SHOT SUPPORT AMISCE SUPPORT(For some models) PLUS MORE. 
      I'M ALSO WORKING ON MODS FOR OTHER MODELS TOO.
      ALL TM, KM AND DM SERIES ARE V2.0 AND NOW HAVE WINDOWS FLASHER INSTEAD, JUST EXTRACT AND RUN FLASH.BAT
       
      WARNING! BIOS FLASHING IS RISKY SO MAKE SURE YOU KNOW WHAT YOU'RE DOING BEFORE PROCEEDING. 
      FLASHING THE WRONG BIOS OR INTERRUPTING THE FLASHING PROCESS WILL BRICK YOUR SYSTEM! 
      USE AT YOUR OWN RISK!
       
      TM, KM AND DM SERIES
       
      P6 AND P4 SERIES
       
      INSTRUCTIONS
        IF YOU LIKE MY WORK FEEL FRE TO BUY ME A COFFEE   ENJOY!
    • By Klem
      Hi,
      In this thread you can post your requests for AMD-V unlock on ACER E5-553G and same laptops with AMD CPU's, for example Acer Aspire E15, Acer Aspire E5-523G, Acer Aspire E1-522, Acer Aspire E1-420, Acer Aspire E5-421, etc.
       
      Now we can unlock  AMD-V function for virtualization support. In general, this method described in the article on this link: http://www.geektech.co.nz/how-to-unlock-...enovo-y700
      This way requires Windows as a system because  some tool works only in Windows.
       
      Download this tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
      Extract the archive H2OUVE.rar directly on the Desktop and copy the H2OUVE folder directly on the disk C:\
      Then run the Command prompt as Administrator and execute these commands:
      cd  \
       
      cd  H2OUVE
       
      H2OUVE.exe   -gv   vars.txt

      After each command press the Enter button.
      After that, you'll have the file "vars.txt" in H2OUVE folder.
      Post here this file "vars.txt" or upload it to any fileserver and  send me the link.

      For reference, here's the EFI-table with available settings for this notebook: https://drive.google.com/open?id=0B4NHIB...WI4LW14bE0
      And here's the setting that needs to be changed:
      0x1C40B             Setting: SVM support, Variable: 0xEE {05 91 54 02 55 02 54 00 34 12 EE 00 00 10 00 01 00}
      0x1C41C                 Option: Disabled, Value: 0x0 (default) {09 07 27 00 10 00 00}
      0x1C423                 Option: Enabled, Value: 0x1 {09 07 28 00 00 00 01}
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.