Jump to content
Klem

Lenovo Z710, Z510 unlocked BIOS menu / wlan whitelist mod / vbios mod

Recommended Posts

8 hours ago, mamon said:

Hi @Klem,

 

can you mody my BIOS to remove the Whitelist?  I want to replace the wifi card in my Lenovo Ideapad z510 to better with 5Ghz frequency.

This is my results:

https://www.sendspace.com/file/ed9y94

 

Thank you very much!

 

Hi!

Ok. Check PM.

Share this post


Link to post
Share on other sites
27 minutes ago, jose333 said:

Hi @Klem,

 

can you mody my BIOS to remove the Whitelist?  I want to replace the wifi card in my Lenovo Ideapad z510 to better with 5Ghz frequency.

This is my results:

 

 
thank you very much.
https://www.sendspace.com/file/kr4ut4
 
thank you very much.

Hi!

Ok. Check your PM box.

Share this post


Link to post
Share on other sites
Posted (edited)

Hi! Could you please make a BIOS mod for my Lenovo Z710? I need to remove a whitelist to replace my wifi card. Also it would be great to unlock hidden additional menus and settings.

 

This is my results:

https://www.sendspace.com/file/jchqst

 

Thank you so much!

Edited by touchy83

Share this post


Link to post
Share on other sites
56 minutes ago, touchy83 said:

Hi! Could you please make a BIOS mod for my Lenovo Z710? I need to remove a whitelist to replace my wifi card. Also it would be great to unlock hidden additional menus and settings.

 

This is my results:

https://www.sendspace.com/file/jchqst

 

Thank you so much!

Hi!

Ok. Check PM.

Share this post


Link to post
Share on other sites
Posted (edited)

What tools chain are you using to do these Lenovo whitelist mods?

Edited by tarfmall
missed the laptop name

Share this post


Link to post
Share on other sites

Hi Klem,

 

could you please unlock my bios and remove whitelist?

results file is here

 

Thank you

Share this post


Link to post
Share on other sites
27 minutes ago, Jens1976 said:

Hi Klem,

 

could you please unlock my bios and remove whitelist?

results file is here

 

Thank you

Hi!

Ok. Check PM.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

    • By Psycha
      Hello, I'm on an alienware m17 r4 and am trying mod my vbios for a 970m 3GB msi. I've managed to get the max boost with an increase in voltage, however I believe my voltage settings maybe unstable. When attempting to load programs capable of high gpu usage capabilities, the gpu begins to become pretty unstable. would anyone be able to provide assistance? I have both my edited and original roms as well.
       
      *update
       
      I'm not sure how to delete this thread but disregard this please. I've figured out the issue.
    • By Iwillsolo
      Hello guys ...

      i wanna make sure that everything is going to work fine with my laptop so i got some questions

      First of all my laptop is Lenovo Z51-70
      CPU: I5-5200U 2.2ghz
      iGPU Intel HD 5500
      dGPU:AMD R9 M375
      Ram: 8GB (will raise it to 16GB)
      HDD: 1TB stock one
      SSD: 120GB (for my games and windows only)

      now i investigated  a little about eGPUs and found that i need a M.2 or thunderbolt, i've found that my wifi card use a M.2 a/e key aka ngff, so i will be using the GDC Beast NGFF version

      to the bad part / question part

      What do i need to know other than the stuff above?
      what is the white-listing thing? i found on support forums that my laptop support some wifi cards only and it's bios cann't be modified according to bios modifying forums (not here)
      in same time saw some posts on reddit that says if ur bios have UMA graphic option then you will need to disable PAX / WIRELESS and enable UMA and it will work fine, the question is that true?

      i wasn't able to find anyone who did it on Z51-70 i found only 1 post on reddit for Z41-70 (which after research found that both are using same M.2 a/e key slot and also same bios... but the one who posted only replied that it's recognized with some errors and never replied back with any updates so still not sure about it.....

       
    • By svl7
      Flashing Overview:
       
      - Go to the device manager -> 'Display Adapters' -> chooser your GPU, right click on it and choose disable
       
      - Flash the VBIOS with mnvflash, a modified version of nvflash (see attachments). Below are detailed instructions for nvflash in case you aren't familiar with it.
      - After the flashing is done: Enable the GPU once again in the device manager.
      - Reboot
       
      Detailed Instructions:
       
      As soon as you see the command line you're ready to go, write
      dir and hit enter to display all the files on the USB drive.
       
      Display all Nvidia adapters in the system:
      nvflash -a  
      or alternatively the longer version of the command:
      nvflash --list This command will return you a list with all Nvidia adapters present in your system.
       
      Here's an example output of this command run on my M15x with a 680m in it:
      NVIDIA Firmware Update Utility (Version 5.117) NVIDIA display adapters present in system: <0> N13E-GTX (10DE,11A0,1028,02A2) H:--:NRM B:02,PCI,D:00,F:00 The number in the <> brackets is the index of the corresponding device. SLI users will have more than one entry and flash each card separately.
       
      Backup your current VBIOS:
      Never forget to keep a backup of your original VBIOS before you flash anything non-stock. Use this command to save a copy of the firmware to your USB drive:
      nvflash -b filename.rom or with
      nvflash --save filename.rom  
      Flash the VBIOS to your card(s):
      For a single card it's really straight forward, you don't need to worry about the adapter indices. Just use this command:
      nvflash -6 vbiosname.rom -6 will allow you to override mismatches of the PCI subsystem ID. In case of a mismatch you'll need to confirm the flash with 'y'. NOTE: Users with a non-US keyboard might need to press 'z' or similar, because the 'y' isn't at the same location for all keyboard layouts.
       
      SLI users will need to flash each card separately. The concept stays the same, but you will need to use the corresponding adapter index to flash a card. How to figure out the adapter nr. is described above.
      Flashing goes like this:
      nvflash -i[index] -6 vbios.rom [index] represents a number, namely the index you found with the 'nvflash -a' command. So a command example to flash a card which has index 0 is: 'nvflash -i0 -6 vbios.rom'
       
       
       
       
       
      Donation link
       
      In case you want to buy me a beer
       
      Thanks and cheers! 
    • By Brian
      The new leak of NVFlash version 5.513.0 with their new RTX GPU (Turing) support is now available in our download section. This includes support for NVIDIA's new RTX 2080 Ti, 2080 and 2070 desktop GPUs. As always, use caution when reading/writing vbios files as you can potentially brick your card and void your warranty. 

      View full article
    • By Brian
      The new leak of NVFlash version 5.513.0 with their new RTX GPU (Turing) support is now available in our download section. This includes support for NVIDIA's new RTX 2080 Ti, 2080 and 2070 desktop GPUs. As always, use caution when reading/writing vbios files as you can potentially brick your card and void your warranty. 
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.