Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
Files contained in this archive:
FTP-DOS.zip prr2.zip M18x R2 - BIOS A03 'unlocked.zip M18x R2 - BIOS A08 'unlocked.zip M18x_R2_-_BIOS_A08_-_[unlocked]_-_[IRST 18.104.22.1682].zip M18x_R2_BIOS_A03_-_[unlocked] - [IRST 22.214.171.1242].zip M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A09_-_[unlocked].zip [FPT]-M18x_R2_BIOS_A10_-_[unlocked]_V2.zip M18x_R2_-_BIOS_A08_-_[unlocked].zip M18x_R2_BIOS_A03_-_[unlocked].zip
For information on how to use the files in this archive, see here:
My donation link in case you want to buy me a beer
My laptop is Monster Tulpar T7 v2.6. i7 4710MQ, 16 GB DDR3 1600 mHZ, GTX 970M 3GB.
I tried a tutorial on the forum to remove the supervisor password on a X260 thinkpad but the winbond 25Q128FVPQ chip is not recognized with the programmer CH341A and ASprogramer (does not detect automatically and not manually). Plugged into the motherboard with a soic8.
Can you help me with detection?
Can I find the password with the software or do I have to write it?
Thank you so much !!!