Jump to content
Flu

LATEST BIOS P870DM-G

Recommended Posts

What is up. Emailed Sager about latest bios and they sent me one. Suppose to provide support for Kabby lake 7XXX series processors as well as optimization for crappy WIFI cards that aka (cough cough KILLER) le'ts not point fingers here XD. File is below. Gotta flash through USB... there are plenty tutorials out there how to do but here are instruction from the email I got.

 

https://drive.google.com/open?id=0B_Ud_l2en4O0MGw0WWJCaXFUS0E

 

Rename the attached file to 9870BV08LS2.7z(Done it for you already)

 

Unzip the 9870BV08LS2.7z to a USB flash drive.

 

Restart Windows.

 

When the screen turns black, keep tapping F7.

 

Select enter setup on the boot menu.

 

Pull down the exit menu in the CMOS setup.

 

Launch EFI shell from filesystem device.

 

The Startup.nsh will flash the BIOS.

Note. Sager Computer does not take the responsibility if the computer does not work after you updated the system BIOS & firmware by

 

yourself. ( Neither do I)


Enjoy

 

 

 

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

the link to the file does not work, you can resubmit it again THX

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By BAKED
      CHECKING TO SEE WHICH CLEVO MODELS YOU WOULD LIKE ME TO MAKE BIOS MODS FOR.

    • By ElChuterRD
      Greetings, I have a p650rs and I have this little problem that I can not play in MRHYBRID mode, only if the charger is connected, and I do not see high quality videos or play if it is in discret mode, if the A / C is connected.
       
      Any idea what it could be?
       
      I have the latest version of Bios and ECF
      I've been looking for custom-made Vbios but I can not find anything.
      Thank you


    • By DR650SE
      Hey guys! Long time no see! Been ages since I've been here and wow has this place changed! @Briankeep up the great work!  I've been pulled away from my computer passion by raising 3 kids! All 6 and under.  Crazy how time flies! 
       
      On to what brings me here.  Love you oming for some ideas.
       
      My X7200 was recently shutting down randomly. The num lock and caps lock would start flashing and then it'd shut down. CPU and GPU Temps looked good, but fans were running a lot.  I figured whatever was hot was something HW Info couldn't see or read.  
       
       
      I repasted my GPUs and CPU, put in new thermal pads as well. Unfortunately when I tightened the CPU heatsink, I must have over tightened a screw because it pulled the screw sleeve on the mobo out. Temps are still good, idle around 33°C, and fans run full bore all the time. So it may not have quite enough pressure on a mofset or something. On the plus side, I let the computer sit on for 16-18 hours idle,and it didn't shut down, which solved one issue and created another.

      Would I be okay to superglue it back down to the mobo? Should I use some other adhesive? Then it would create a tad more pressure, evenly, and possibly solve my fan issue. Damn these old computers. Purchasing a newmobo would probably be more expensive than it's worth.
       
      I really need to retire this thing, but it's served me faithfully since Oct 2012. Eventually I'll move to something more mobile and a desktop. 
    • By Klem
      Hi,
      In this thread you can post your requests for AMD-V unlock on ACER E5-553G and same laptops with AMD CPU's, for example Acer Aspire E15, Acer Aspire E5-523G, Acer Aspire E1-522, Acer Aspire E1-420, Acer Aspire E5-421, etc.
       
      Now we can unlock  AMD-V function for virtualization support. In general, this method described in the article on this link: http://www.geektech.co.nz/how-to-unlock-...enovo-y700
      This way requires Windows as a system because  some tool works only in Windows.
       
      Download this tool: https://drive.google.com/file/d/0B4NHIBM...RtQXM/view
      Extract the archive H2OUVE.rar directly on the Desktop and copy the H2OUVE folder directly on the disk C:\
      Then run the Command prompt as Administrator and execute these commands:
      cd  \
       
      cd  H2OUVE
       
      H2OUVE.exe   -gv   vars.txt

      After each command press the Enter button.
      After that, you'll have the file "vars.txt" in H2OUVE folder.
      Post here this file "vars.txt" or upload it to any fileserver and  send me the link.

      For reference, here's the EFI-table with available settings for this notebook: https://drive.google.com/open?id=0B4NHIB...WI4LW14bE0
      And here's the setting that needs to be changed:
      0x1C40B             Setting: SVM support, Variable: 0xEE {05 91 54 02 55 02 54 00 34 12 EE 00 00 10 00 01 00}
      0x1C41C                 Option: Disabled, Value: 0x0 (default) {09 07 27 00 10 00 00}
      0x1C423                 Option: Enabled, Value: 0x1 {09 07 28 00 00 00 01}
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.