Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
(EXP GDC Beast v8.4d mPCI-E + GTX970 + ATX PSU) eGPU project for Lenovo IdeaPad Z710, i7-4700MQ, 16GB RAM, SSD, GeForce GT745MBy damianalex
I want to show you my new project.
I bought my laptop about 5 years ago. It was never speed deamon, but for every day use, it was enough to me.
Nvidia GeForce GT745M
512 SSD Adata SU800
Yesterday I bought Witcher 3. Of course on 1080p it's impossible to play, because of about 10fps
So I make a decision to buy external grahpic card.
I choose GTX970 and now I am looking for occasion to buy it.
I've already bought EXP GDC v8.4d mPCI-E. It is used and cost about 30$.
I will use ATX PSU to supply graphic card, because I have old desktop PSU at home.
1) unlock bios
2) buy GTX 970
3) enjoy Witcher 3!
BTW I try to cool down my laptop, so I replaced thermal paste to Kryonout Thermal Grizzly and make some tests. Temperatures and fps are on screenshots.
1) laptop on table, playing GTA V 1080p
- first minute (GPU core 1045MHz)
-after some time, because of high temperature and GPU throlttling (GPU core drop down even to 400MHz)
2) with thermalpad Glacier NC400 SilentiumPC
- 30 minute and longer (GPU core drop to about 900MHz)
3) without down case of laptop (like on picture with thermal paste) on thermalpad.
Here laptop never drops down MHz and max temp are about 72 Celsius degrees.
Bacause of that I bought second down case for my laptop and I will cut there additional holes.
I will describe next step when I get all stuff I need!
I created a case for egpu using 2.5mm acrylic sheets. The first time I created a case to support a GPU + ATX psu
Now I created another one for the GPU with an external Xbox 360 203w psu.
the finish was not good but for my use it is already good.
*both cases album
*Construction of the second case
*adapting xbox psu to 8pin power (taken from 24pin)
all made by hand with the tools I had.
By can rx
Hello to all dear visitors,
I have been using Lenovo y510p notebook for two years but in games I think my graphic card is inadequate. After that I've bought Mini PCI-e EXP GDC and attached it to where the wireless card socket is. However because it has x1 speed its performance is too low. Even though on tests rx460's ranks is low than rx480, it has more performance.
In x1 PCI-e port, the performance is too low and inefficient. On GPUz programme, use of memory controller is 20% but use of GPU is 100%. I mean, I've been hooked to the x1 speed.
Components : EXP GDC version 8.0 +450w PSU + rx480
I've read all pages about ultrabay, I want to buy and to share in forum.
If anyone has ultrabay to PCI-e port, I want to buy. Please help.
Thanks for everything.