Jump to content
Raider480

M17x R4 with 3920xm overclock - TDP Throttle

Recommended Posts

I posted about this over here, but that has not gained much traction, so I figured that this might be a better place to ask. The full details are in the Reddit post, in case I forget something here, but essentially, I am having trouble with what appears to be a CPU TDP throttle restricting my 3920xm overclock when the package power reaches 55W.

My specs are:

  • System: M17x R4
  • CPU: 3920xm
  • GPU: GTX 980m
  • RAM: 16GB (4x4GB) DDR3 1333MHz
  • OS: Windows 8.1 64-bit (MBR/legacy boot with Optimus)
  • PSU: 330W
  • BIOS: A11 Unlocked

 

No matter what multiplier I set in the BIOS or Intel XTU for any combination of 1, 2, 3, or 4 cores active (currently trying 42x for all) my CPU still throttles back to 3.6GHz under a benchmark. Moderate loads of around 50% see a max ratio of 40x~41x but still not meeting the overclock I set. Under a full load at 3.6GHz my CPU is only reaching about 88º C with both an upgraded CPU fan and a repaste, so I don't think that thermal throttling is causing this trouble at the moment.

 

ThrottleStop lights up the "TDP Throttle" indicator when this happens, and looking under TPL shows that ThrottleStop is reading a Turbo Boost power limit of just 55W (which is Intel's factory max). I do have "Turbo PWR Limit MSR Lock" disabled in my BIOS, and current limits maxed. To be fair, though, this BIOS is still very unfamiliar and difficult to navigate for me, so I could very well have incorrectly adjusted some values.

 

Is there a way to force the (Turbo) TDP limit higher than 55W? Is my system actually capable of sending more power than this to the CPU? Is there maybe something wrong with my CPU that causes it to ignore my BIOS settings?

Share this post


Link to post
Share on other sites

Hey, unfortunately there aren't any options to limit the voltage. I also upgraded from an i7 3610qm to an i7 3940xm, and my temps also went beyond 90 degrees which means it's throttling down. Now I did two things so my temps decreased, the first thing is, I lapped the heatsink of the cpu which decreased temps by around 10-15 which is already a huge difference. The second thing is, I replaced the m17X r4 fan with an m14x r2 fan, the r2 fan has a better cfm compared to the m17x r4 in exchange for louder operation (not too loud tho) 

 

I'll share some links with more information about the fan upgrade and lapping your heatsink, good luck :o)

 

 

 

 

http://www.overclockersclub.com/guides/lapping/

Edited by naightmehr

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Terriikk
      Hey guys, I have an Alienware m14x R2, and I have been trying to get access to the BIOS so that I can change the boot options (Everything is locked, I am unsure if someone set a password of if these are locked by default).I've tried updating the BIOS, and resetting the CMOS and nothing has changed this. Would anyone know if there are other options I can explore? Thank you. 
    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad X250, X260.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
      Important!
      For creating your personal bios dump and to flash your bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/itm/USB-Programmer-CH341A-Series-Burner-Chip-24-EEPROM-BIOS-Writer-25-SPI-Flash-AU/153117073868?epid=577511738&hash=item23a67d21cc:g:XKEAAOSw5UdbW-iL
       
      https://www.amazon.com/Parts-tower-CH341A-Programmer-Software/dp/B01FVVHCVC/ref=sr_1_4?ie=UTF8&qid=1522179315&sr=8-4&keywords=ch341a&dpID=51BO7eGgO5L&preST=_SY300_QL70_&dpSrc=srch
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/MAUSAN-Socket-Adapter-150MIL-205MIL/dp/B06ZYSNJF3/ref=pd_sbs_21_3?_encoding=UTF8&psc=1&refRID=XM79QJWGED6B4K2VEZDJ
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
       
      Note: 
      Each bios mod prepare personally and based on your personal bios dump which contain your personal data like Serial numbers, UUID, Service TAG, MAC addresses, Windows keys, NVRAM settings, etc.
      For creating your personal bios dump and to flash bios mod, you need use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
      Just dump your Bios (from your laptop) using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
    • By racerxdl
      Hi all,
       
      It has been a while since I did anything to my laptop (Clevo P670RG-G) and since I recently got a VR Headset I wish I could overclock my GPU a little. So far the NVidia software (on windows) doesn't allow me to overclock it (the linux sort of allows, which some custom Xorg options) so I decided to give a try modding the vbios.
       
      I read all sorts of issues / guides about it, and it seens that the hardware topology (where the vbios is stored and how things are connected) changes from machine to machine.
       
      What I know about my laptop is that it has two VBios, one for Hybrid Mode and one for Discrete Mode. I'm currently running the discrete mode.
       
      I dumped my VBios using GPU-z and opened up in Maxwell II Bios Tweaker. Everything seens fine so far.
       
      So I have few questions about it:
       
      - There is a way to just unlock the VBios to show the overclocking options in NVidia software? (That way I dont need to reflash to change clocks)
      - I can just flash this GPU-z dump to my VBios?
      - If I brick my GPU, that GPU-z dumped image is the raw SPI image, so if I managed to physically access the VBios, I can just reflash over it?
      - I saw some people saying that I might need as well to flash the main laptop bios as well, is that really needed?
       
      Thanks!
       
      Lucas

    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad T440p / T440s / T540p.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
      Important!
      For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       


×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.