Jump to content

Recommended Posts

I am relatively new to the online PC gaming experience and would like some input on my next project. Right now, I would like to make myself a proficient (not two expensive) EGPU setup for my laptop. I don't have the funds nor the experience to build a tower yet so i want to start with this.

I have a Toshiba Satellite and here are its specs. :

Toshiba Satellite L50-C 

Intel Core i7-5500U CPU - 2.4 GHz

16 G's of ram

 

My question is what setup including card, power supply, etc. I should use?

Thanks for your input ahead of time.

Share this post


Link to post
Share on other sites
On 2/22/2017 at 11:26 AM, nrpaul1015 said:

I don't have the funds nor the experience to build a tower yet

 

A custom desktop PC may be easier to install and troubleshoot than an eGPU.

 

Any kid who knows how to put square pegs in square holes can figure out the former, and there are many high-production-value resources widely available to hold your hand if you don't know how.

 

I'm not recommending that you go and build a PC. I'm just stating the fact that "I'll build a eGPU since it's probably easier than building a PC" is bs.

 

On 2/22/2017 at 11:26 AM, nrpaul1015 said:

what setup including card, power supply, etc. I should use?

 

There are many guides and sample systems that you can choose to follow. Use your best judgement.

Edited by Arbystrider

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By SnipeKing17
      The GPU works, The PSU works, The system works. [individually they all do work]
       
      The system works perfectly fine without the WLAN card.
       
      When i put the system to sleep and hotswap the mPCIe riser and WLAN press something on the keyboard.. Restarts.
      Will shutdown in roughly 27 seconds for those 27 seconds it works just fine like how it normally would on external monitor.
       
      When i shut it down and plug the riser and switch it on, same story. 27 seconds.
       
      I don't even see a error. I get to login screen directly. I used DDU already.
       
      I timed it. no matter what i do if i use the eGPU, External monitor it restarts instead of pause-play. I have 27 seconds.
       
      Need help!
    • By Kel
      I got the exp gdc beast 8.5 got all the connections right... laptop boots up... fans turn on the gpu.... device manager detects gtx 1060 with a “ ! “ in a yellow triangle. Now what to do.... i tried to do the bios mod.... but realised that i have 3.07 version. 
      Questions-
      1 is there any way to get this done without the mod?? 
      2 if mod is the only way... kindly help me with step by step instruction in laymans terms... i m not a techy... so i might not understand technical terms.... altho i am interested... but learning yet. Please help. 
    • By n0br4n
      Hello guys,
      I've a really weird problem. My laptop has started beeping when use nvidia gpu yesterday. I dissambled my laptop and tried to plug out every single hardware and test them one by one. There's 22 beeps and equal interval beetween them.  It goes shutdown after that 22 beeps.
       
      My laptop is Clevo W650SJ and it uses Nvidia 840M gpu. That problem isn't causing because of windows or installed driver cos i tried to reinstall windows but it started to beeping when w10 installer check devices. Also I've bios password on startup , if i don't type password and hit the enter , it starts beeping after 10-15 sec. Also fan speed goes up to maximum and it doesn't slow down untill i shut it down or shutdown itself.
       
      If i use any program or run a game which uses nvidia gpu , it starts beeping but if i close the game on first beeps , beeping is stops. But fan speed still maxiumum until i shutdown to pc.
       
      I am looking a way to fix it. I didn't make any changes on my pc before than this problem.
    • By Drozof
      Has any company out there launched a laptop with an external MXM port? 
       
      Just curious since with the boom in the gaming laptop market and some companies launching eGPU thunderbolt enclosures, isnt the MXM faster?
       
      Is it because of licensing issues? or hardware problems?
       
    • By Iwillsolo
      Hello guys ...

      i wanna make sure that everything is going to work fine with my laptop so i got some questions

      First of all my laptop is Lenovo Z51-70
      CPU: I5-5200U 2.2ghz
      iGPU Intel HD 5500
      dGPU:AMD R9 M375
      Ram: 8GB (will raise it to 16GB)
      HDD: 1TB stock one
      SSD: 120GB (for my games and windows only)

      now i investigated  a little about eGPUs and found that i need a M.2 or thunderbolt, i've found that my wifi card use a M.2 a/e key aka ngff, so i will be using the GDC Beast NGFF version

      to the bad part / question part

      What do i need to know other than the stuff above?
      what is the white-listing thing? i found on support forums that my laptop support some wifi cards only and it's bios cann't be modified according to bios modifying forums (not here)
      in same time saw some posts on reddit that says if ur bios have UMA graphic option then you will need to disable PAX / WIRELESS and enable UMA and it will work fine, the question is that true?

      i wasn't able to find anyone who did it on Z51-70 i found only 1 post on reddit for Z41-70 (which after research found that both are using same M.2 a/e key slot and also same bios... but the one who posted only replied that it's recognized with some errors and never replied back with any updates so still not sure about it.....

       
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.