Jump to content

Sanjula

Recommended Posts

Specs :-  Intel i5-2410m 2.3 GHz

               8 GB ram

               Intel hd 3000 (igpu)

               AMD hd 6470m (dgpu)

               Win 10

 

# Use the mpcie slot for egpu

 

GPU powers on and Epu setup 1.x recognized the graphics card. 

Disabled the dgpu using setup 1.x. 

Installed latest crimson drivers

In device manager gpu shows with error 43. Disabled the egpu from device manager and re-enabled it again. Then it showed normally. 

 

BUT THE PROBLEM IS I CANT CONNECT IT INTO A EXTERNAL DISPLAY. i USED THE DVI-SINGLE LINK PORT AND THE HDMI PORT BUT MY MONITOR DOESNT PICK UP THE SIGNAL.

 

Help required !!!!

 

01. First look at the Device manager.

Device manager.PNG

 

 

02. After re-enabling the gpu

Re-Enabled the EGPU.PNG

Link to comment
Share on other sites

-What egpu u have?
Your system looks similar as mine.
-First start DDU in safe mode and remove ALL drivers.
-Reboot to setup 1x
-Do ignore dgpu and run compation egpu+igp
-Disable dgpu and add it with F3 to startup
-Test run

-Install drivers for your egpu, restart
-Run egpu with startup.but
-It should work



Sent from my ZTE A2017U using Tapatalk

Link to comment
Share on other sites

7 minutes ago, mrmegtette said:

-What egpu u have?
Your system looks similar as mine.
-First start DDU in safe mode and remove ALL drivers.
-Reboot to setup 1x
-Do ignore dgpu and run compation egpu+igp
-Disable dgpu and add it with F3 to startup
-Test run

-Install drivers for your egpu, restart
-Run egpu with startup.but
-It should work



Sent from my ZTE A2017U using Tapatalk
 

i have a XFX R7770 (egpu)

Link to comment
Share on other sites

33 minutes ago, mrmegtette said:

-What egpu u have?
Your system looks similar as mine.
-First start DDU in safe mode and remove ALL drivers.
-Reboot to setup 1x
-Do ignore dgpu and run compation egpu+igp
-Disable dgpu and add it with F3 to startup
-Test run

-Install drivers for your egpu, restart
-Run egpu with startup.but
-It should work



Sent from my ZTE A2017U using Tapatalk
 

Now i dont get Error 43, But my dgpu hasn't been disabled

111111.PNG

 

Also i cant connect to  a monitor using either its SINGLE LINK DVI PORT or HDMI PORT ( i use HDMI to VGA)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.