Jump to content
Apologies for the spam Read more... ×
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  
Sanjula

Error 43

Recommended Posts

Specs :-  Intel i5-2410m 2.3 GHz

               8 GB ram

               Intel hd 3000 (igpu)

               AMD hd 6470m (dgpu)

               Win 10

 

# Use the mpcie slot for egpu

 

GPU powers on and Epu setup 1.x recognized the graphics card. 

Disabled the dgpu using setup 1.x. 

Installed latest crimson drivers

In device manager gpu shows with error 43. Disabled the egpu from device manager and re-enabled it again. Then it showed normally. 

 

BUT THE PROBLEM IS I CANT CONNECT IT INTO A EXTERNAL DISPLAY. i USED THE DVI-SINGLE LINK PORT AND THE HDMI PORT BUT MY MONITOR DOESNT PICK UP THE SIGNAL.

 

Help required !!!!

 

01. First look at the Device manager.

Device manager.PNG

 

 

02. After re-enabling the gpu

Re-Enabled the EGPU.PNG

Share this post


Link to post
Share on other sites

-What egpu u have?
Your system looks similar as mine.
-First start DDU in safe mode and remove ALL drivers.
-Reboot to setup 1x
-Do ignore dgpu and run compation egpu+igp
-Disable dgpu and add it with F3 to startup
-Test run

-Install drivers for your egpu, restart
-Run egpu with startup.but
-It should work



Sent from my ZTE A2017U using Tapatalk

Share this post


Link to post
Share on other sites
7 minutes ago, mrmegtette said:

-What egpu u have?
Your system looks similar as mine.
-First start DDU in safe mode and remove ALL drivers.
-Reboot to setup 1x
-Do ignore dgpu and run compation egpu+igp
-Disable dgpu and add it with F3 to startup
-Test run

-Install drivers for your egpu, restart
-Run egpu with startup.but
-It should work



Sent from my ZTE A2017U using Tapatalk
 

i have a XFX R7770 (egpu)

Share this post


Link to post
Share on other sites
33 minutes ago, mrmegtette said:

-What egpu u have?
Your system looks similar as mine.
-First start DDU in safe mode and remove ALL drivers.
-Reboot to setup 1x
-Do ignore dgpu and run compation egpu+igp
-Disable dgpu and add it with F3 to startup
-Test run

-Install drivers for your egpu, restart
-Run egpu with startup.but
-It should work



Sent from my ZTE A2017U using Tapatalk
 

Now i dont get Error 43, But my dgpu hasn't been disabled

111111.PNG

 

Also i cant connect to  a monitor using either its SINGLE LINK DVI PORT or HDMI PORT ( i use HDMI to VGA)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       
    • By Brian
      With AMD's long awaited Navi release, do you plan to purchase the 5700/XT?
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
    • By Diky
      help me to unlock amd-v acer aspire one 725
      it's my vars file
      please..
      vars.rar
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.