Jump to content
EwinRacing Flash Series Gaming Chairs
  • 0

Question

Hi so im decidng which laptop i whould buy to replace my lenovo yoga 500 with a gtx 940m

Im deciding between these 2 laptops  for gaming and build quality either

Acer aspire vx15

Or

Dell inspiron gaming 15 7000

 

For both the 799$ version 

If you suggest any other laptops please tell me and thanks for reading this

 

 

 

Edited by Zaw

Share this post


Link to post
Share on other sites

7 answers to this question

Recommended Posts

  • 0

theyr both crap, dell has pentium chip which is way to old, and the aspire is the same. nothing for gaming at all.

Share this post


Link to post
Share on other sites
  • 0

So what gaming laptop would u reccommend at a budget around 800$ ?

Share this post


Link to post
Share on other sites
  • 0

it depends, which games u wanna play with. Online Gaming (more ram), new games (more grafik), and what else u wanna do with.
 Do u wanna use an external screen cuz 15 zoll is quite small u gotta keep in mind u gone look on it for some hours.

 

oh iam sry i clicked on that link in ur post but it directed me to some old ones on amazon. guess its commercial. Can u link the ones u had in mind. Gone take another look.

Edited by casis86

Share this post


Link to post
Share on other sites
  • 0

Dell : http://www.dell.com/en-us/shop/productdetails/inspiron-15-7567-laptop

 

Acer : https://www.cnet.com/products/acer-aspire-vx-15/preview/

 

Now i was surfing on the internet my laptop bow is a lenovo im pretty happy with it it just doesnt pull out enough power but look what i found http://shop.lenovo.com/us/en/laptops/ideapad/legion-y-series/y520/?action=testB

 its not out yet thought but i dont mind that since i need to save like a 100$ more

And thanks for replying to this and helping me out

Share this post


Link to post
Share on other sites
  • 0

this doesnt help much either. cant see specification, the acer looks cool but thats about it 5600 rpm hard drive isnt good.

 

The dell has a 2 fans 1 for each chip which is pretty good also its dell they allways build good stuff :D take the cheapest one and upgrade evrything urself like ram, ssd, hdd.

Couldnt look at us side but in germany they sell them allready with the gtx 1080m which is awsome. But we pay 999€ for the cheapest model.

 

about lenovo never had one. this 2 fan cooling looks fine but if its for any good use who knows.

And it looks ugly. :pirate:

Edited by casis86

Share this post


Link to post
Share on other sites
  • 0

Go with the  Lenovo Y520 which is coming out soon within the same price range. The specs seem right for the price, and I have not had much quality issues with Lenovo and this price range and higher. This is the laptop I would buy if I was in the market for a budget gaming laptop.

Share this post


Link to post
Share on other sites
  • 0

You should wait just a little and get the new budget-line  with 1050ti, they say it would be price around $700/$800

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By mclarke2355
      Hello,
       
      I want to share the modded Bios I created for the Acer Aspire E5-572G notebook.
      The official bios 1.09 was used as a base.
      I'm offering three flavours: Microcode 01, Microcode 07 and Microcode 21.
      Microcode 21 is the latest available microcode, this is the Bios you want to use unless you want the special properties of the other microcodes.
      Microcode 07 is the latest microcode that allows using the full turbo clock speed on all cores (using single core turbo with all cores).
      Microcode 01 is the one you should take if you want to try this. I wasn't able to get it to work on mine (i5 4210m, HM86), but your mileage may vary.
      In case you want to always use an older microcode, I'm offering a script for windows that'll keep the OS from using a newer microcode (compatible with Windows Vista to Windows 10). Frequency and other things can be set up with ThrottleStop (use the latest version).
      I've also included an overclocking enabled ME firmware that should (hopefully) allow overclocking on the HM87 equipped notebooks.
      There are two flavours of this notebook available: Ones that use the HM87 chipset and others that use the HM86 chipset. Overclocking is only possible with HM87 as HM86 isn't capable of overclocking (tested it myself).
      Additionally I offer a collection of Bios, EC, ME and FD files of this device, in case anyone wants to experiment with these for a bit (EC Modding, etc.).
      I will update this bios in case there are newer parts available.
       
      Any feedback is welcome!
       

      Features:
      -Advanced Bios Options unlocked (Advanced, Power tabs and additional options in the existing tabs)
      -Nvidia 840M/940M VBioses replaced with adapted 940MX VBios with unlocked TDP Limit, unlocked Boost Table and some OC (1306,5MHz GPU/1070MHz Memory - with general usability in mind) + all voltage sliders unlocked
      -Intel Management Engine: Updated to 9.1.37.1002 + All Locks Unlocked + Overclocking Enabled For HM87 Notebooks + PAVP (Protected Audio/Video Path) Enabled
      -Flash Descriptor unlocked
      -Microcode updated to version 21 (respectively downgraded to 07 and 01)
      -Intel GOP Driver updated to 5.5.1033
      -Intel VGA Bios updated to 1042
      -Intel RST OROMs updated to 15.1.0.2545
      -Realtek Lan OROMs updated to 2.037/2.64
      -Applied a few useful BIOS patches by CodeRush (Unlock CPU Power Management Register (useful for Hackintosh Users)/Disable BIOS Lock/Disable SMI Lock)
       

      Flash procedure:
      1. Copy the BIOS file to an empty and with FAT16/32 formatted usb stick.
      2. Unplug the AC adapter.
      3. Remove the battery of the notebook - you can unlock the battery on the backside.
      4. Plug in the USB flash disk.
      5. Press and hold <Fn> and <Esc>, and then plug in the AC adapter while still holding <Fn> and <Esc>.
      6. Press the Power button. You can now stop holding <Fn> and <Esc>.
      7. The BIOS flash should now begin, the fans will spin up at max speed and the power led should blink. It should take between one to two minutes.
      8. After everything is done, you can reinsert the battery and go to the BIOS (F2). There you may want to change some settings (the BIOS flash erases all previously chosen settings).
       

      Recommended Bios settings:
       
      Main:
      F12 Boot Menu ---> Enabled
      D2D Recovery ---> Disabled
       
      Advanced:
      Boot Configuration: Numlock ---> On
      Thermal Configuration: Cpu Thermal Configuration: Bi-Directional PROCHOT# ---> Disabled
      Chipset Configuration: RTC Lock ---> Disabled
      Chipset Configuration: IFR Update ---> Disabled
      Chipset Configuration: BIOS Lock ---> Disabled
      ACPI Table/Features Control: TCO WatchDog Support ---> Enabled
      ACPI Table/Features Control: WatchDog ACPI Table ---> Enabled
      ACPI Table/Features Control: ACPI Memory Debug ---> Disabled
      ACPI Table/Features Control: PEP Graphics ---> Disabled
      Extended ICC: Use WatchDog Timer For ICC ---> Enabled
      Extended ICC: ICC Locks after EOP ---> All Unlocked
       
      Security:
      User Access Level ---> Full
       
      Power:
      Wake on LAN ---> Disabled
      Advanced CPU Control: xAPIC Mode ---> Enabled
      Advanced CPU Control: Package C-State Demotion ---> Enabled
      Advanced CPU Control: Package C-State Un-Demotion ---> Enabled
      Advanced CPU Control: ACPI 5.0 CPPC Support ---> Enabled
      Advanced CPU Control: ACPI 5.0 CPPC Platform SCI ---> Enabled
      Advanced CPU Control: Package Power Limit MSR Lock ---> Disabled
      Advanced CPU Control: Long Term Power Limit Override ---> Enabled
      Advanced CPU Control: Long Term Time Window ---> 128
       

      Module names (for replacement/update):
      GOP Driver: 7755CA7B-CA8F-43C5-889B-E1F59A93D575_256.ROM
      Intel RST: 382F560D-17A9-4887-BD9C-EB439C1CC482_1654.ROM and 501737AB-9D1A-4856-86D3-7F1287FA5A55_1781.ROM
      Intel VGA Bios: 8DFAE5D4-B50E-4C10-96E6-F2C266CACBB6_1743.ROM
      Nvidia 840M VBios: D336DBCB-33C1-4D15-A06F-C3FF405C6A68_1749.ROM
      Nvidia 940M VBios: C09F4207-D557-47D0-A4B5-1E4B6459E519_1761.ROM
      Realtek LAN: 0A33D14A-7B60-4C58-9194-DED0812F9B2B_1767.ROM and E8991F69-D813-4116-A2C2-61E304ECBD72_1533.ROM
      Intel Microcode (integrated in file): PADDING_2702.ROM
      Management Engine: Integrated in BIOS image, HEX Editor needed for replacement
       

      Credits: 
                    -Donovan6000 for his very helpful guides and insights on Insyde bios modding
                    -Andy P whose PhoenixTool I used to replace the modules
                    -Plutomaniac for providing the used Intel ME firmware and the Intel ME System Tools to properly configure it for this notebook
                    -Ultrax5 from TechInferno for providing his OC enabled ME firmware for 8-series systems which I used as a reference to unlock the feature for this notebook
                    -SoniX for his Intel VGA Bios update guide and the OROM, Microcode and Intel VGA Bios database he maintains
                    -Pacman for sharing the latest Intel RST 15.1.0.2545 OROMs
                    -CodeRush for providing the included BIOS patches
                    -WerePug from overclock.net for providing the way to unlock the Nvidia VBIOS voltage sliders for editing in Maxwell II BIOS Tweaker
                    -The author of the Maxwell II BIOS Tweaker which I used for editing the Nvidia VBioses
                    -All the other people who shared the used OROMs/Microcodes/Firmwares/Useful Information etc.
       

      Changelog:
                         -13.09.16: 1.09a - Initial release
                         -03.10.16: 1.09b:
                                                      Unlocked a few more options that I missed before - everything that can be unlocked should be available now
                                                      Overclocking enabled ME is now included by default (no disadvantages for HM86 notebooks)
                                                      Applied a few useful BIOS patches by CodeRush (Unlock CPU Power Management Register (useful for Hackintosh Users)/Disable BIOS Lock/Disable SMI Lock)
                         -22.10.16: 1.09c:
                                                      Changed Nvidia GPU idle voltage from 0,94V to a more correct value of 0,76V - thanks to Maison1 from win-raid.com for bringing this matter to my attention
                                                      Unlocked all sliders in the Nvidia VBIOSes for editing with Maxwell II BIOS Tweaker - thanks to WerePug from overclock.net for posting the way to do this
       

      Files:
      Acer Aspire E5-572G - BIOS 1.09c - Microcode 01
      Acer Aspire E5-572G - BIOS 1.09c - Microcode 07
      Acer Aspire E5-572G - BIOS 1.09c - Microcode 21

      DeleteMicrocode Script for Windows
      Acer Aspire E5-572G BIOS-ME-EC-FD Collection
       
    • By Brentjuh2000
      Who can help me with modding and getting my 980M working?
      I replaced the M6100 that was originally in the laptop with a 980M but I can't seem to get it to work. I keep getting Code 43
      the Hardware ID : PCI\VEN_10DE&DEV_13D7&SUBSYS_15CD1028
      I heard i need to modify and INF file but i have no experience with it
       
      The vBIOS is from MSI
       
       
    • By Krak
      Hi everyone, I have a problem. I need to unlock the bios settings because I only have basic functions and I need to increase the memory of VRam. Sorry if I posted a post not in this topic.
    • By mx90
      Hello, I've got a Quadro M2200 (GPU: GM206GL-A Revision A1, and MxM 3.0a Maxwell card) with the following bios: 84.06.76.00.1C
       
      I've read that this card is very similar to the GTX 965m, but that it has been underclocked considerably. It seems to be a good candidate for unlocking since I hardly see the temperature exceed 70C as-is. I'm requesting help with this - I'm not sure if it's possible to simply flash the vbios from a Dell GTX 965m (MxM 3.0a) or if some type of edit of the card's current vbios would do the trick. I'm hoping someone could help me out with the specifics of doing such an edit if that's the case. 
       
      Thanks!
    • By EdMkn
      Hello,
      I am requesting your help. I have an Acer e5-523g, and  I have applied the method with h2ouve mentioned in this forum to activate the amd-v feature, and it worked. But everytime on two, when the system was shutting down, whether intentionally or low battery, the virtualization was going back to deactivate. And I always repeated the same process. Until one day: when I enter in the cmd, everytime I tap “h2ouve -gv vars.txt” or “h2ouve -sv vars_mod.txt” it shows sth like:
       
      Now parsing Variable Information...
      LoadDeviceDriver fail,
      GetLastError=0x2 Failed to get bios data!
      Fail to get Variable Information
       
      My problem is that I don’t really know what LoadDriverDevice means, and how to make it work
       

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.