Jump to content
EwinRacing Flash Series Gaming Chairs
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Zer0kbps
      Hi there, 
       
      I'm planning to upgrade my gpu to the gtx 980 from my now knackered cooked 9 times hd7970, but looking at pictures and videos on the web I have a different 3 pipe heatsink to most it seems... 
       
      Others appear to have more copper present on the memory cooler section than mine. 
       
      My question is for anyone who has the same heatsink or knows of this one, have they been able to cool another gpu successfully? 
       
       

    • By IronPancakes
      Hey guys, first post, but I thought I’d discuss my heatsink fan retrofit in my old M14x r1. 
       
      Old fan was loud and not very efficient: the air transfer rate was around 2 cfm (I’m assuming cubic feet per minute). Finally had enough and decided to swap out the crappy r1 fan/coughing pinwheel for a r2 fan (rated at 10.4cfm). 
       
      I found an old r2 heat sink on eBay (beware though that the heat sink for the r2 will NOT fit the gpu/cpu configuration for the r1. HOWEVER, the fan of the r2 heat sink it is attached to is a carbon copy fit into the r1 MoBo. A few philips head screws and a seal of good electric tape and BAM, you’ve got a significantly cooler and MUCH quieter intake fan in your old R1. 
       
      My CPU temps from before were around 87-88 max load in FSX, 65 for the GPU; bear in mind this is after a repaste. Now with the new fan, I’m not going over 77 degrees on the CPU, and the gpu stays around 58, all while being MUCH quiter. I’ll post pics of the walkthrough if anyone is interested.
       
       Just thought I’d share with all you fellow loonies trying to squeeze every last frame and degree out of our “portable toaster ovens with a screen and keyboard”. 
       
       
    • By Henrik9979
      First I want to thank the community, who have inspired me to do this project.
      I will give you guys the chance to follow me on this journey.
       
      I hope you will all help me come up with ideas, techniques and parts that could become handy.
       
      This modding may be possible to convert to allot of laptops.
       
      Let's begin!
      Here is the measurement of the went hole.
      77mm X 16mm

       
      I have 2 ideas for what can be done.
       
    • By Mountain
      I was looking to open up my y50-70 and replace the thermal compound with liquid metal, but I can't find any information on the heat sink. I know you can't use LM on an aluminum heatsink, so how do I find this info? Didn't see it in the user manual- does anybody know if it is safe to use liquid metal on this heatsink?
    • By Mountain
      I was looking to open up my y50-70 and replace the thermal compound with liquid metal, but I can't find any information on the heat sink. I know you can't use LM on an aluminum heatsink, so how do I find this info? Didn't see it in the user manual- does anybody know if it is safe to use liquid metal on this heatsink?
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.