Jump to content
K'nuckles

Lenovo y480 code 43 with Zotac GTX1050 Ti

Recommended Posts

I plugged in egpu, booted it up with my gtx 1050 ti and no matter what driver I use, I keep getting code 43. I don't know, but i believe my bios has something to do with it. Can someone plz clearify what I need to do in my case to get code 43 out. Thanks

Share this post


Link to post
Share on other sites

From what I have read - 1050ti won't work when using mPCIe - which I assume you are using in the Y480.

 

This is because it requires you to install an older driver first (372) then upgrade - however driver 372 doesn't  support 1050ti.

 

See this thread for some other guys trying to find a way around it.

 

ADMIN EDIT: Linking 3rd party sites forbidden.

 

You could try a GTX 1060 and this should work fine with the Y480

 

What is your EGPU  setup?

Share this post


Link to post
Share on other sites

I'm having the same issue with my Y580.

 

I'm using a 1050ti with the Beast v8.0 PCIe adapter.

 

I just got the files to unlock the bios on this badboy. I'll check back once I have this figured out.

Share this post


Link to post
Share on other sites

Did you figure this out? I have this problem now too.

On 2/11/2017 at 0:25 AM, classicarl said:

I'm having the same issue with my Y580.

 

I'm using a 1050ti with the Beast v8.0 PCIe adapter.

 

I just got the files to unlock the bios on this badboy. I'll check back once I have this figured out.

 

I have a GTX 1050 with EXP GDC Beast.

Edited by Ajayajayaj

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Sparkhunter
      Hi there guys,
       
      I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
       
      I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
       

       
      The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
       
      If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
       
      Thanks.
       
    • By Blocker35
      Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
       
      - MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
      - Razer X Core 
      - Apple TB3 to TB2 Adapter
      -  TB2 Cable (Cable Matters)
      - 23inch AOC External Monitor
       
      I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
      I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
      Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
    • By SnipeKing17
      The GPU works, The PSU works, The system works. [individually they all do work]
       
      The system works perfectly fine without the WLAN card.
       
      When i put the system to sleep and hotswap the mPCIe riser and WLAN press something on the keyboard.. Restarts.
      Will shutdown in roughly 27 seconds for those 27 seconds it works just fine like how it normally would on external monitor.
       
      When i shut it down and plug the riser and switch it on, same story. 27 seconds.
       
      I don't even see a error. I get to login screen directly. I used DDU already.
       
      I timed it. no matter what i do if i use the eGPU, External monitor it restarts instead of pause-play. I have 27 seconds.
       
      Need help!
    • By PrecastFlame
      Hi, I'm having problems trying to connect a GTX 750 Ti to my Lenovo T420 using the dock EXP GDC Beast (express card version).
      My laptop: Lenovo T420
      RAM: 8GB DDR3
      CPU: Intel Core i5 2520M
      GPU: Intel HD Graphics 3000
       
      My problem is: if I plug the express card and I turn on the laptop it doesn't boot up and the screen becomes horrible, with coloured pixels and a sound like "bip-bip".
      If I try plugging the express card when the laptop is already turned on it sees the gpu, but if try installing the drivers I have to apply the modifies restarting the computer.
      I hope you understood my problem (I don't speak English very well).
      Please help me, It's making me crazy!
       
      EDIT: I didn't say that if I plug the express card when the pc is already turned on, in the device menager there is "Error 12" on the gtx 750 ti
    • By Kel
      I got the exp gdc beast 8.5 got all the connections right... laptop boots up... fans turn on the gpu.... device manager detects gtx 1060 with a “ ! “ in a yellow triangle. Now what to do.... i tried to do the bios mod.... but realised that i have 3.07 version. 
      Questions-
      1 is there any way to get this done without the mod?? 
      2 if mod is the only way... kindly help me with step by step instruction in laymans terms... i m not a techy... so i might not understand technical terms.... altho i am interested... but learning yet. Please help. 
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.