Sylvain60 Posted January 20, 2017 Share Posted January 20, 2017 (edited) computer: lenovo W530 + 8Gb + SSD evo 512 (MBR) + 3720QM igpu: HD4000 dgpu: k2000m egpu: MSI 1060 GTX Gaming X 3G os: win10 64bits drivers: nvidia 372.70 PSU: corsair RM550 adapter egpu: - GDC v8 (express card) : PWR ON - PTD (center 75) - PE4C V3.0 (express card) : PWR ON - SW1(1) - SW2 (2) bios: - igpu, dgpu, optimus activate - legacy only - no virtualization intel setup 1.31: - dGPU off - egpu port gen2 - compaction igpu + egpu with 56gb and only egpu in 32bit Hi, Actually I cant use PE4C. I cant load setup 1.31 (error) to correct the error 12. With the "Beast" after a lot of try now I can use the external monitor on the EGPU. But : Sometimes need desable and enable the GTX to detect the monitor Sometimes windows start with error 43 need desable and enable the GTX to resolve I can only use the DVi, with the DP(displayport), windows reboot after 30sec Windows reboot (blackscreen and rebbot) a lot of times I succeed a bench with 3D mark (fire): 8059 pts - graphics (9517 pts, 44.5fps, 38.67fps) - physics (8987 pts, 28.53fps) - combined (3499 pts, 16.28 fps) Do you thinks the result are correct for the config ? Actually the system is too unstable (reboot all 15min, only DVI, monitor detection unstable, sometimes error 43) ... do you see why ? thanks Edited January 20, 2017 by Sylvain60 Link to comment Share on other sites More sharing options...
A noob Posted January 23, 2017 Share Posted January 23, 2017 return your GTX 1060 and buy an RX 480 Link to comment Share on other sites More sharing options...
Recommended Posts