Jump to content
Review: E-Win Champion Series Gaming Chair Read more... ×
EwinRacing Flash Series Gaming Chairs
eGPU Enthusiast

Setup 1.30 Discussion

Recommended Posts

If I have a Lenovo L440,

 

Will using this software help me use my external gpu?

 

My eGPU is GeForce GT 720 and the problems I have is that i dont have enough resources to use it. (error 12)

 

Thanks

 

 

Share this post


Link to post
Share on other sites

I have this feeling that my TOLUD is 3.5GB that's why setup 1.30 is not working to me....

Share this post


Link to post
Share on other sites

i  running setup_disk_image but have warning massege what can i for this steps?

 

*Macbook pro retina 2013 early (gt 650m)

*Windows 10

*Setup 1.2 by  @Tech Inferno Fan

*Using language is korean.

*see attached image and index in devcon.txt

thanks.

Quote

ACPI\PNP0C01\2
    Name:     Device has the following resources reserved:
        MEM : 20000000-201fffff
        MEM : 40000000-401fffff
ACPI\PNP0C02\1
    Name:     Device has the following resources reserved:
        MEM : fed1c000-fed1ffff
        MEM : fed10000-fed17fff
        MEM : fed18000-fed18fff
        MEM : fed19000-fed19fff
        MEM : e0000000-efffffff
        MEM : fed20000-fed3ffff
        MEM : fed90000-fed93fff
        MEM : fed45000-fed8ffff
        MEM : ff000000-ffffffff
        MEM : fee00000-feefffff
ACPI\PNP0C02\2
    Name:     Device has the following resources reserved:
        IO  : 002e-002f
        IO  : 004e-004f
        IO  : 0061-0061
        IO  : 0063-0063
        IO  : 0065-0065
        IO  : 0067-0067
        IO  : 0080-0080
        IO  : 0092-0092
        IO  : 00b2-00b3
        IO  : 1000-100f
        IO  : 0400-047f
        IO  : 0500-057f
ACPI\PNP0200\4&41DBD23&0
    Name:     Device has the following resources reserved:
        IO  : 0000-001f
        IO  : 0081-0091
        IO  : 0093-009f
        IO  : 00c0-00df
        DMA : 4
ACPI\PNP0C09\0
    Name: Microsoft ACPI     Device is currently using the following resources:
        IO  : 0062-0062
        IO  : 0066-0066
ACPI\PNP0C0A\0
    Name: Microsoft ACPI     Device is not using any resources.
ACPI\PNP0B00\4&41DBD23&0
    Name:     Device is currently using the following resources:
        IO  : 0070-0077
ACPI\PNP0103\4&41DBD23&0
    Name: High precision     Device has the following resources reserved:
        MEM : fed00000-fed003ff
        IRQ : 0
        IRQ : 8
ACPI\PNP0C0E\2&DABA3FF&0
    Name: ACPI     Device is not using any resources.
ACPI\PNP0C0D\2&DABA3FF&0
    Name: ACPI     Device is not using any resources.
ACPI\PNP0000\4&41DBD23&0
    Name:     Device has the following resources reserved:
        IO  : 0020-0021
        IO  : 0024-0025
        IO  : 0028-0029
        IO  : 002c-002d
        IO  : 0030-0031
        IO  : 0034-0035
        IO  : 0038-0039
        IO  : 003c-003d
        IO  : 00a0-00a1
        IO  : 00a4-00a5
        IO  : 00a8-00a9
        IO  : 00ac-00ad
        IO  : 00b0-00b1
        IO  : 00b4-00b5
        IO  : 00b8-00b9
        IO  : 00bc-00bd
        IO  : 04d0-04d1
ACPI\PNP0A08\0
    Name: PCI Express     Device is currently using the following resources:
        MEM : 000a0000-000bffff
        MEM : 8fa00000-feafffff
        MEM : fed40000-fed44fff
        IO  : 0000-0cf7
        IO  : 0d00-ffff
ACPI\PNP0C0C\2&DABA3FF&0
    Name: ACPI     Device is not using any resources.
ACPI\PNP0C04\4&41DBD23&0
    Name:     Device has the following resources reserved:
        IO  : 00f0-00f0
        IRQ : 13
ACPI\PNP0100\4&41DBD23&0
    Name:     Device has the following resources reserved:
        IO  : 0040-0043
        IO  : 0050-0053
15 matching device(s) found.
 

K-1.png

Edited by hlgyrms

Share this post


Link to post
Share on other sites

Hello. I have a problem get my Bplus TH05 running at an MBPr 2011 13". When I do PCI compaction it shows an error after intializing the gtx770 at the end of the progress. It says "Error reading from drive C: DOS area: sector not found". I can chose abort, ignore, retry and fail. I tried everything, but nothing works.

Someone any idea whats going wrong or how to fix?

 

 

IMG_3555.JPG

 

Edit: I just switched to Windows 10 and it worked out of the box. No Setup 1.3 or any scripts and no Errors in Device Manager.

See the Benchmarks on the internal screen. I ll buy a external one in a couple days and hope (know) have better results.

http://www.3dmark.com/3dm/11500237

Edited by reyluck

Share this post


Link to post
Share on other sites

Hey guys, i hope someone here can help me out with this issue im having with the 1.3 setup. I am currently trying to run a GTX 750 through Expresscard slot on my HP Elitebook 8570w with 8gb ram (windows 10) WITHOUT an external display. I just updated to Windows 10, but since i did eGPU setup 1.3 isnt doing anything anymore. I did the mounting but when i boot, my laptop does not give me the option to use the setup and just boots normally. Any ideas?

Edit: I got the setup 1.3 to run on windows 10, but when i successfully complete the compaction and continue to boot the eGPU no longer shows in my device manager or anything. I really want to get this to work. Any tips?

Edited by Thawsome

Share this post


Link to post
Share on other sites
On 3/15/2016 at 0:40 PM, andhie133128 said:

As promised, see below screenshot:

 

1st. Normal boot up without PCI Compaction, the graphics card showing error 12

2nd. After PCI compaction using 1.30 setup, the graphics card is missing under display adapter

3rd. related to 2nd. checking below, one device showing error 12 which I'm not sure why

 

Capture1.JPG

Capture2.JPG

Capture3.JPG

Hey, i am having the EXACT same problem with my setup. Trying to run a GTX 750 via expresscard slot on my HP Elitebook 8570w... cant seem to get anything to fix it

Share this post


Link to post
Share on other sites
10 hours ago, Thawsome said:

Hey, i am having the EXACT same problem with my setup. Trying to run a GTX 750 via expresscard slot on my HP Elitebook 8570w... cant seem to get anything to fix it

Hi, there is some cases that you still need to do the DSDT override + PCI compaction using setup 1.30.

I fixed it and now my setup is working well.

Share this post


Link to post
Share on other sites

i  running setup_disk_image but have warning massege what can i for this steps?

 

*Macbook pro retina 2013 early (gt 650m)

*Windows 10

*Setup 1.2 by  @Tech Inferno Fan

*Using language is korean.

*see attached image and index in devcon.txt

thanks.

Quote

ACPI\PNP0C01\2
    Name:     Device has the following resources reserved:
        MEM : 20000000-201fffff
        MEM : 40000000-401fffff
ACPI\PNP0C02\1
    Name:     Device has the following resources reserved:
        MEM : fed1c000-fed1ffff
        MEM : fed10000-fed17fff
        MEM : fed18000-fed18fff
        MEM : fed19000-fed19fff
        MEM : e0000000-efffffff
        MEM : fed20000-fed3ffff
        MEM : fed90000-fed93fff
        MEM : fed45000-fed8ffff
        MEM : ff000000-ffffffff
        MEM : fee00000-feefffff
ACPI\PNP0C02\2
    Name:     Device has the following resources reserved:
        IO  : 002e-002f
        IO  : 004e-004f
        IO  : 0061-0061
        IO  : 0063-0063
        IO  : 0065-0065
        IO  : 0067-0067
        IO  : 0080-0080
        IO  : 0092-0092
        IO  : 00b2-00b3
        IO  : 1000-100f
        IO  : 0400-047f
        IO  : 0500-057f
ACPI\PNP0200\4&41DBD23&0
    Name:     Device has the following resources reserved:
        IO  : 0000-001f
        IO  : 0081-0091
        IO  : 0093-009f
        IO  : 00c0-00df
        DMA : 4
ACPI\PNP0C09\0
    Name: Microsoft ACPI     Device is currently using the following resources:
        IO  : 0062-0062
        IO  : 0066-0066
ACPI\PNP0C0A\0
    Name: Microsoft ACPI     Device is not using any resources.
ACPI\PNP0B00\4&41DBD23&0
    Name:     Device is currently using the following resources:
        IO  : 0070-0077
ACPI\PNP0103\4&41DBD23&0
    Name: High precision     Device has the following resources reserved:
        MEM : fed00000-fed003ff
        IRQ : 0
        IRQ : 8
ACPI\PNP0C0E\2&DABA3FF&0
    Name: ACPI     Device is not using any resources.
ACPI\PNP0C0D\2&DABA3FF&0
    Name: ACPI     Device is not using any resources.
ACPI\PNP0000\4&41DBD23&0
    Name:     Device has the following resources reserved:
        IO  : 0020-0021
        IO  : 0024-0025
        IO  : 0028-0029
        IO  : 002c-002d
        IO  : 0030-0031
        IO  : 0034-0035
        IO  : 0038-0039
        IO  : 003c-003d
        IO  : 00a0-00a1
        IO  : 00a4-00a5
        IO  : 00a8-00a9
        IO  : 00ac-00ad
        IO  : 00b0-00b1
        IO  : 00b4-00b5
        IO  : 00b8-00b9
        IO  : 00bc-00bd
        IO  : 04d0-04d1
ACPI\PNP0A08\0
    Name: PCI Express     Device is currently using the following resources:
        MEM : 000a0000-000bffff
        MEM : 8fa00000-feafffff
        MEM : fed40000-fed44fff
        IO  : 0000-0cf7
        IO  : 0d00-ffff
ACPI\PNP0C0C\2&DABA3FF&0
    Name: ACPI     Device is not using any resources.
ACPI\PNP0C04\4&41DBD23&0
    Name:     Device has the following resources reserved:
        IO  : 00f0-00f0
        IRQ : 13
ACPI\PNP0100\4&41DBD23&0
    Name:     Device has the following resources reserved:
        IO  : 0040-0043
        IO  : 0050-0053
15 matching device(s) found.
 

K-1.png

Share this post


Link to post
Share on other sites

Hi, I detecting the Egpu and evrything is running. But its geting very slow, slower than only CPU.
Running a Asus i7 16gb ram, gtx760m and gtx 590 with cx600wat psu. I can find what type of mPCIe im running but i understand i need to ugrade it to version 1.2? but i relley can not reinstall my windows 10, i just have to much work on it.

I can not figure if i can use USB as boot or not to run the setup1.3?

Share this post


Link to post
Share on other sites

Hi all, I'm new of the forum and I'm trying to use an eGPU setup using windows 10.

My hardware is:

Asus n55sf

i7-2630QM

8GB ram

gt555m

eGPU: Asus GTX 650 using EXP GDC BEAST v8.

 

at the moment, in order to use the eGPU i need to boot with the wifi card on --> suspend the pc --> replace the wifi card with the EXP GDC BEAST. in this way i'm able to use the eGPU without any problem.

I would like to avoid this annoying procedure and keep the eGPU always connected but if I do so, I have a Blue Screen of Death with the ACPI_BIOS_ERROR at windows boot. i've also tried to isolate the #PERST pin (pin 22) but in this case the eGPU is not detected.

 

Anyone of you have any idea on how to solve this issue?? is there a workaround to make it work?? Like a DSDT modification?

 

Thank you

Simone

Share this post


Link to post
Share on other sites

Hello eveyone.

İ signed uparrow-10x10.png for just this topic. So I am new to the forum.

And I have searched for my problem but couldn't find anything so if I missed it sorry upfront.

I have all  a packard bell easy note tv44hc

İ5-3230

8 gb DDR3

and 2gb geforce710m

I plugged and made all the connections with a evga gtx 970

I don't have external  monitor so I want to use my laptops monitor.

 

have my 1.30 setup usb booted.

First of all I cannot deselect normap

I tried a variety of options and I always end up with "[MDR] NOREMAP=Y Disk remapping disabled" black screen after chain loader test run.

I will be very glad if you help. Thanx.

Share this post


Link to post
Share on other sites
On 4/30/2016 at 0:17 PM, JuPucino said:

Hi all, I'm new of the forum and I'm trying to use an eGPU setup using windows 10.

My hardware is:

Asus n55sf

i7-2630QM

8GB ram

gt555m

eGPU: Asus GTX 650 using EXP GDC BEAST v8.

 

at the moment, in order to use the eGPU i need to boot with the wifi card on --> suspend the pc --> replace the wifi card with the EXP GDC BEAST. in this way i'm able to use the eGPU without any problem.

I would like to avoid this annoying procedure and keep the eGPU always connected but if I do so, I have a Blue Screen of Death with the ACPI_BIOS_ERROR at windows boot. i've also tried to isolate the #PERST pin (pin 22) but in this case the eGPU is not detected.

 

Anyone of you have any idea on how to solve this issue?? is there a workaround to make it work?? Like a DSDT modification?

 

Thank you

Simone

Hi.

 

If i were you i just unlock my bios and set the TOLUD value to fix 2.25gb and disable the dgpu. Then you can forget about dsdt override.

After that just reinstall windows because you probably get ACPI_BIOS_ERROR if you modify your TOLUD, at least thats what happend on my N53SN.

Pin22 isolation only needs if your bios hangs at startup on every delay settings(motherboard forces #PERST instantly).

So in the end my system only needs PIN22+PCI compaction with setup1x to work with the eGPU.

Your bios modding needs the exact same steps(N53S and N55S and N550JV bioses are almost identical), so you can just do the exact same steps with your bios file, and yes i checked it before i sent you this message but only flash it with your own risk [N55SFAS_207_unlocked.rom] and i strongly recommend to do the steps yourself and not just download and yolo what i linked. For last word you will unlock bunch of new options and you can set up these new setting wrong (for example: don't disable the igp)  causing black screen upon boot --> CMOS reset helps. But if you just play with the settings what you need then you are good.

Share this post


Link to post
Share on other sites

 

 

Has anyone managed to chainload to UEFI ?

I dont know what uefi.iso to put in config.bin

Edited by unixz

Share this post


Link to post
Share on other sites

Guys I have windows 7 64bit and when I "click" Chainloader (set to MBR, mbr2 does not work) --> "Test run" ... it does not boot to win7 direclty but  I get the boot selection screen again showing me my windows 7 entry + my DIY eGPU entry... is this normal? 

 

When I watch this video : 

, I see that when he "clicks" on chainloader --> "Test run", it boots directly to windows 10

Share this post


Link to post
Share on other sites

Hello. i set up eGPU and finished all process.

but how to work for eGPU?

please see the images.

 

Macbook R 15" 2013 late

akitio box

gtx970

no external monitor

1.png

2.png

Share this post


Link to post
Share on other sites

Hi, guys
I have a problem to run Setup 1.30 after install and reboot the notebook, the following appears:

"Bad or missing command interpreter: \COMMAND.COM

 

 Anyone know how to solve this?

 

DSC_0007.JPG

Share this post


Link to post
Share on other sites
1 hour ago, will_br said:

Hi, guys
I have a problem to run Setup 1.30 after install and reboot the notebook, the following appears:

"Bad or missing command interpreter: \COMMAND.COM

 

 Anyone know how to solve this?

 

DSC_0007.JPG

 

Pls re-download Setup 1.30, extract and re-install. If the error persists, the pls do a USB installation.

Share this post


Link to post
Share on other sites
1 hour ago, Tech Inferno Fan said:

 

Pls re-download Setup 1.30, extract and re-install. If the error persists, the pls do a USB installation.

 

How do I make the USB installation? Just put the setup on the flash drive and run from within the flash drive?

 

Edited by will_br

Share this post


Link to post
Share on other sites

Hi, I have a lenovo laptop with a GPT disk and windows installed. Does anyone have any idea how to convert the disk to MBR? I am fine with reinstalling windows but I don't have windows on a CD drive nor USB key, I'm not quite sure what to do, please help, thank you

Share this post


Link to post
Share on other sites

Can't seem to get the setup 1.x working. Anyone know how to get it working with EFI? I did all the steps detailed in the .htm file, but nothing seems to work properly. Thanks.

Share this post


Link to post
Share on other sites

Hej I have installed DIY eGPU Setup 1.30, but as it turns out, it doesn't work on my laptop. I have an HP probook 6560b.

Now whenever I turn on my computer, and blackscrean shows up with 2 setups, the DIY eGPU and my normal operating system.

Can someone pls guide me thru the uninstallation process of DIY eGPU 1.30?

 

Best regards

FlapperDap

 

Share this post


Link to post
Share on other sites

Hello

First of all thanks to @Tech Inferno Fan for helping out regarding my payment issue.

Second of all, I'm confused, my TOLUD is N/A.

First of all my PC specs:

SystemInfo.png

 

My Laptop is a Dell Latitude E6410

  • Processor: i7-720QM (originally had i7-620M)
  • RAM: 6GB DDR3 1066 (1x4GB , 1x2GB)
  • Chipset: QM57

Now the Setup 1.3 Screen Shots:

SCN000.jpg

^ This shows tolud@N/A; both the GPUs are detected

SCN001.jpg

^ Both GPUs with their details using nvflash

SCN002.jpg

^ PCI Map

SCN003.jpg

^ PCI Device Tree

SCN004.jpg

^ Showing error; where as the all_alloc = yes in background

 

Now for the problem. As soon as Windows starts the card is powered off via PCIe. Now my question. Why is this happening?

 

So a little help would be awesome.

 

Regards!

Share this post


Link to post
Share on other sites
13 minutes ago, ByFire&Blood said:

Now for the problem. As soon as Windows starts the card is powered off via PCIe. Now my question. Why is this happening?

 

So a little help would be awesome.

 

Regards!

 

Both your dgpu and egpu are allocated ok. With the egpu powering off, check you power leads and psu attached to it.

Share this post


Link to post
Share on other sites

So I got everything detected and running in setup 1.30,by booting it from my USB,  however it does not let me boot from my USB after choosing automated setup with startup.bat.

II have 4 partitions on  my 1 TB hdd with 1 windows 10 installation and 1 windows 7 installation.  My primary OS, Windows 10,is installed on my msata ssd. So the problem now is that I can chose that Windows 10 installation but it gives me an arrow that it can't access the device, possibly due to recent hardware changes. I can boot into the ssd windows 10 installation without first going through the option of the automated startup.bat.

 

I would really appreciate an answer.  

 

I have a chinese laptop with:

i7 4710MQ

16GB ram

250GB Samsung 850 mSata SSD

1TB HDD

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.