Thawsome Posted April 4, 2016 Share Posted April 4, 2016 (edited) Hey guys, i hope someone here can help me out with this issue im having with the 1.3 setup. I am currently trying to run a GTX 750 through Expresscard slot on my HP Elitebook 8570w with 8gb ram (windows 10) WITHOUT an external display. I just updated to Windows 10, but since i did eGPU setup 1.3 isnt doing anything anymore. I did the mounting but when i boot, my laptop does not give me the option to use the setup and just boots normally. Any ideas? Edit: I got the setup 1.3 to run on windows 10, but when i successfully complete the compaction and continue to boot the eGPU no longer shows in my device manager or anything. I really want to get this to work. Any tips? Edited April 5, 2016 by Thawsome Link to comment Share on other sites More sharing options...
Thawsome Posted April 5, 2016 Share Posted April 5, 2016 On 3/15/2016 at 0:40 PM, andhie133128 said: As promised, see below screenshot: 1st. Normal boot up without PCI Compaction, the graphics card showing error 12 2nd. After PCI compaction using 1.30 setup, the graphics card is missing under display adapter 3rd. related to 2nd. checking below, one device showing error 12 which I'm not sure why Hey, i am having the EXACT same problem with my setup. Trying to run a GTX 750 via expresscard slot on my HP Elitebook 8570w... cant seem to get anything to fix it Link to comment Share on other sites More sharing options...
andhie133128 Posted April 6, 2016 Share Posted April 6, 2016 10 hours ago, Thawsome said: Hey, i am having the EXACT same problem with my setup. Trying to run a GTX 750 via expresscard slot on my HP Elitebook 8570w... cant seem to get anything to fix it Hi, there is some cases that you still need to do the DSDT override + PCI compaction using setup 1.30. I fixed it and now my setup is working well. Link to comment Share on other sites More sharing options...
hlgyrms Posted April 25, 2016 Share Posted April 25, 2016 i running setup_disk_image but have warning massege what can i for this steps? *Macbook pro retina 2013 early (gt 650m) *Windows 10 *Setup 1.2 by @Tech Inferno Fan *Using language is korean. *see attached image and index in devcon.txt thanks. Quote ACPI\PNP0C01\2 Name: Device has the following resources reserved: MEM : 20000000-201fffff MEM : 40000000-401fffff ACPI\PNP0C02\1 Name: Device has the following resources reserved: MEM : fed1c000-fed1ffff MEM : fed10000-fed17fff MEM : fed18000-fed18fff MEM : fed19000-fed19fff MEM : e0000000-efffffff MEM : fed20000-fed3ffff MEM : fed90000-fed93fff MEM : fed45000-fed8ffff MEM : ff000000-ffffffff MEM : fee00000-feefffff ACPI\PNP0C02\2 Name: Device has the following resources reserved: IO : 002e-002f IO : 004e-004f IO : 0061-0061 IO : 0063-0063 IO : 0065-0065 IO : 0067-0067 IO : 0080-0080 IO : 0092-0092 IO : 00b2-00b3 IO : 1000-100f IO : 0400-047f IO : 0500-057f ACPI\PNP0200\4&41DBD23&0 Name: Device has the following resources reserved: IO : 0000-001f IO : 0081-0091 IO : 0093-009f IO : 00c0-00df DMA : 4 ACPI\PNP0C09\0 Name: Microsoft ACPI Device is currently using the following resources: IO : 0062-0062 IO : 0066-0066 ACPI\PNP0C0A\0 Name: Microsoft ACPI Device is not using any resources. ACPI\PNP0B00\4&41DBD23&0 Name: Device is currently using the following resources: IO : 0070-0077 ACPI\PNP0103\4&41DBD23&0 Name: High precision Device has the following resources reserved: MEM : fed00000-fed003ff IRQ : 0 IRQ : 8 ACPI\PNP0C0E\2&DABA3FF&0 Name: ACPI Device is not using any resources. ACPI\PNP0C0D\2&DABA3FF&0 Name: ACPI Device is not using any resources. ACPI\PNP0000\4&41DBD23&0 Name: Device has the following resources reserved: IO : 0020-0021 IO : 0024-0025 IO : 0028-0029 IO : 002c-002d IO : 0030-0031 IO : 0034-0035 IO : 0038-0039 IO : 003c-003d IO : 00a0-00a1 IO : 00a4-00a5 IO : 00a8-00a9 IO : 00ac-00ad IO : 00b0-00b1 IO : 00b4-00b5 IO : 00b8-00b9 IO : 00bc-00bd IO : 04d0-04d1 ACPI\PNP0A08\0 Name: PCI Express Device is currently using the following resources: MEM : 000a0000-000bffff MEM : 8fa00000-feafffff MEM : fed40000-fed44fff IO : 0000-0cf7 IO : 0d00-ffff ACPI\PNP0C0C\2&DABA3FF&0 Name: ACPI Device is not using any resources. ACPI\PNP0C04\4&41DBD23&0 Name: Device has the following resources reserved: IO : 00f0-00f0 IRQ : 13 ACPI\PNP0100\4&41DBD23&0 Name: Device has the following resources reserved: IO : 0040-0043 IO : 0050-0053 15 matching device(s) found. Link to comment Share on other sites More sharing options...
DodsRyckarn Posted April 27, 2016 Share Posted April 27, 2016 Hi, I detecting the Egpu and evrything is running. But its geting very slow, slower than only CPU. Running a Asus i7 16gb ram, gtx760m and gtx 590 with cx600wat psu. I can find what type of mPCIe im running but i understand i need to ugrade it to version 1.2? but i relley can not reinstall my windows 10, i just have to much work on it. I can not figure if i can use USB as boot or not to run the setup1.3? Link to comment Share on other sites More sharing options...
JuPucino Posted April 30, 2016 Share Posted April 30, 2016 Hi all, I'm new of the forum and I'm trying to use an eGPU setup using windows 10. My hardware is: Asus n55sf i7-2630QM 8GB ram gt555m eGPU: Asus GTX 650 using EXP GDC BEAST v8. at the moment, in order to use the eGPU i need to boot with the wifi card on --> suspend the pc --> replace the wifi card with the EXP GDC BEAST. in this way i'm able to use the eGPU without any problem. I would like to avoid this annoying procedure and keep the eGPU always connected but if I do so, I have a Blue Screen of Death with the ACPI_BIOS_ERROR at windows boot. i've also tried to isolate the #PERST pin (pin 22) but in this case the eGPU is not detected. Anyone of you have any idea on how to solve this issue?? is there a workaround to make it work?? Like a DSDT modification? Thank you Simone Link to comment Share on other sites More sharing options...
egovanno Posted May 1, 2016 Share Posted May 1, 2016 Hello eveyone. İ signed up for just this topic. So I am new to the forum. And I have searched for my problem but couldn't find anything so if I missed it sorry upfront. I have all a packard bell easy note tv44hc İ5-3230 8 gb DDR3 and 2gb geforce710m I plugged and made all the connections with a evga gtx 970 I don't have external monitor so I want to use my laptops monitor. have my 1.30 setup usb booted. First of all I cannot deselect normap I tried a variety of options and I always end up with "[MDR] NOREMAP=Y Disk remapping disabled" black screen after chain loader test run. I will be very glad if you help. Thanx. Link to comment Share on other sites More sharing options...
Doink Posted May 1, 2016 Share Posted May 1, 2016 On 4/30/2016 at 0:17 PM, JuPucino said: Hi all, I'm new of the forum and I'm trying to use an eGPU setup using windows 10. My hardware is: Asus n55sf i7-2630QM 8GB ram gt555m eGPU: Asus GTX 650 using EXP GDC BEAST v8. at the moment, in order to use the eGPU i need to boot with the wifi card on --> suspend the pc --> replace the wifi card with the EXP GDC BEAST. in this way i'm able to use the eGPU without any problem. I would like to avoid this annoying procedure and keep the eGPU always connected but if I do so, I have a Blue Screen of Death with the ACPI_BIOS_ERROR at windows boot. i've also tried to isolate the #PERST pin (pin 22) but in this case the eGPU is not detected. Anyone of you have any idea on how to solve this issue?? is there a workaround to make it work?? Like a DSDT modification? Thank you Simone Hi. If i were you i just unlock my bios and set the TOLUD value to fix 2.25gb and disable the dgpu. Then you can forget about dsdt override. After that just reinstall windows because you probably get ACPI_BIOS_ERROR if you modify your TOLUD, at least thats what happend on my N53SN. Pin22 isolation only needs if your bios hangs at startup on every delay settings(motherboard forces #PERST instantly). So in the end my system only needs PIN22+PCI compaction with setup1x to work with the eGPU. Your bios modding needs the exact same steps(N53S and N55S and N550JV bioses are almost identical), so you can just do the exact same steps with your bios file, and yes i checked it before i sent you this message but only flash it with your own risk [N55SFAS_207_unlocked.rom] and i strongly recommend to do the steps yourself and not just download and yolo what i linked. For last word you will unlock bunch of new options and you can set up these new setting wrong (for example: don't disable the igp) causing black screen upon boot --> CMOS reset helps. But if you just play with the settings what you need then you are good. 1 Link to comment Share on other sites More sharing options...
unixz Posted May 8, 2016 Share Posted May 8, 2016 (edited) Has anyone managed to chainload to UEFI ? I dont know what uefi.iso to put in config.bin Edited May 8, 2016 by unixz Link to comment Share on other sites More sharing options...
yeahman45 Posted May 8, 2016 Share Posted May 8, 2016 Guys I have windows 7 64bit and when I "click" Chainloader (set to MBR, mbr2 does not work) --> "Test run" ... it does not boot to win7 direclty but I get the boot selection screen again showing me my windows 7 entry + my DIY eGPU entry... is this normal? When I watch this video : , I see that when he "clicks" on chainloader --> "Test run", it boots directly to windows 10 Link to comment Share on other sites More sharing options...
hlgyrms Posted May 10, 2016 Share Posted May 10, 2016 Hello. i set up eGPU and finished all process. but how to work for eGPU? please see the images. Macbook R 15" 2013 late akitio box gtx970 no external monitor Link to comment Share on other sites More sharing options...
will_br Posted May 16, 2016 Share Posted May 16, 2016 Hi, guys I have a problem to run Setup 1.30 after install and reboot the notebook, the following appears: "Bad or missing command interpreter: \COMMAND.COM Anyone know how to solve this? Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted May 16, 2016 Share Posted May 16, 2016 1 hour ago, will_br said: Hi, guys I have a problem to run Setup 1.30 after install and reboot the notebook, the following appears: "Bad or missing command interpreter: \COMMAND.COM Anyone know how to solve this? Pls re-download Setup 1.30, extract and re-install. If the error persists, the pls do a USB installation. Link to comment Share on other sites More sharing options...
will_br Posted May 16, 2016 Share Posted May 16, 2016 (edited) 1 hour ago, Tech Inferno Fan said: Pls re-download Setup 1.30, extract and re-install. If the error persists, the pls do a USB installation. How do I make the USB installation? Just put the setup on the flash drive and run from within the flash drive? Edited May 16, 2016 by will_br Link to comment Share on other sites More sharing options...
Nikolas Posted May 17, 2016 Share Posted May 17, 2016 Hi, I have a lenovo laptop with a GPT disk and windows installed. Does anyone have any idea how to convert the disk to MBR? I am fine with reinstalling windows but I don't have windows on a CD drive nor USB key, I'm not quite sure what to do, please help, thank you Link to comment Share on other sites More sharing options...
cyphersk8 Posted May 25, 2016 Share Posted May 25, 2016 Can't seem to get the setup 1.x working. Anyone know how to get it working with EFI? I did all the steps detailed in the .htm file, but nothing seems to work properly. Thanks. Link to comment Share on other sites More sharing options...
FlapperDap Posted May 25, 2016 Share Posted May 25, 2016 Hej I have installed DIY eGPU Setup 1.30, but as it turns out, it doesn't work on my laptop. I have an HP probook 6560b. Now whenever I turn on my computer, and blackscrean shows up with 2 setups, the DIY eGPU and my normal operating system. Can someone pls guide me thru the uninstallation process of DIY eGPU 1.30? Best regards FlapperDap Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted May 25, 2016 Share Posted May 25, 2016 Pls run C:\egpu\uninstall-disk-image as admin user. Link to comment Share on other sites More sharing options...
ByFire&Blood Posted May 30, 2016 Share Posted May 30, 2016 Hello First of all thanks to @Tech Inferno Fan for helping out regarding my payment issue. Second of all, I'm confused, my TOLUD is N/A. First of all my PC specs: My Laptop is a Dell Latitude E6410 Processor: i7-720QM (originally had i7-620M) RAM: 6GB DDR3 1066 (1x4GB , 1x2GB) Chipset: QM57 Now the Setup 1.3 Screen Shots: ^ This shows tolud@N/A; both the GPUs are detected ^ Both GPUs with their details using nvflash ^ PCI Map ^ PCI Device Tree ^ Showing error; where as the all_alloc = yes in background Now for the problem. As soon as Windows starts the card is powered off via PCIe. Now my question. Why is this happening? So a little help would be awesome. Regards! Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted May 30, 2016 Share Posted May 30, 2016 13 minutes ago, ByFire&Blood said: Now for the problem. As soon as Windows starts the card is powered off via PCIe. Now my question. Why is this happening? So a little help would be awesome. Regards! Both your dgpu and egpu are allocated ok. With the egpu powering off, check you power leads and psu attached to it. Link to comment Share on other sites More sharing options...
Uniik Posted June 7, 2016 Share Posted June 7, 2016 So I got everything detected and running in setup 1.30,by booting it from my USB, however it does not let me boot from my USB after choosing automated setup with startup.bat. II have 4 partitions on my 1 TB hdd with 1 windows 10 installation and 1 windows 7 installation. My primary OS, Windows 10,is installed on my msata ssd. So the problem now is that I can chose that Windows 10 installation but it gives me an arrow that it can't access the device, possibly due to recent hardware changes. I can boot into the ssd windows 10 installation without first going through the option of the automated startup.bat. I would really appreciate an answer. I have a chinese laptop with: i7 4710MQ 16GB ram 250GB Samsung 850 mSata SSD 1TB HDD Link to comment Share on other sites More sharing options...
stopchemtrails Posted June 22, 2016 Share Posted June 22, 2016 (edited) Bought today DIY e-GPU Setup 1.30 by Nando4 an made it work in about 2 minutes, no need for DSDT override and most important I have not lost my precious time! -I'm using PE4H v2.4, ONLY PCIe GEN 1- Soon I'll buy this PE4C V3.0 suggested by Nando for enhanced performance respect my actual eGPU adaptor (PE4H v2.4). Edited June 23, 2016 by stopchemtrails Changes Link to comment Share on other sites More sharing options...
stopchemtrails Posted June 23, 2016 Share Posted June 23, 2016 On 17/6/2016 at 8:35 AM, diabloretriever said: hey, can you tell me how to buy it? should i buy it from this or just email nando? I mailed Nando telling him that I wanted to buy Setup 1.30 and he replied me to make a 25USD donation to his email address... I made the donation and when he received donation gave me instructions Link to comment Share on other sites More sharing options...
tremendoza Posted June 24, 2016 Share Posted June 24, 2016 Hello, can someone help me out here, I'd like to know how to accomplish 32-bit compaction on "dGPU and eGPU" on my AMD (non-intel) chipset seeing as I don't have gui-type options to do so with DIY eGPU Setup. Thanks. Link to comment Share on other sites More sharing options...
dan_yuzh Posted June 25, 2016 Share Posted June 25, 2016 (edited) Hello! I have successfully connected ASUS GTX 960 to my notebook ASUS Q501LA running Windows 10. I had the error 12 but it was fixed by DSDT patch. It was working OK. However, i didn't find any way to use custom DSDT in Windows 10 without using the TESTSIGNING mode (i need to turn this mode off due to Bohemia Battleye service (ARMA 3) which is not starting with TESTSIGNING ON). So i installed Windows 7 in UEFI mode to use the custom DSDT without this TESTSIGNING mode. After i applied the custom DSDT i received the Large Memory entry but the error 12 is still showing. I tried to delete the video adapter and pcie roots from device manager and then reboot but it didn't help. My question is: 1. Will the Setup 1.30 work with my Windows 10 Pro UEFI OS? 2. Will the Setup 1.30 work with my Windows 7 Ultimate UEFI OS? 3. Is there any other way to get rid of error 12? Thanks! Edited June 25, 2016 by dan_yuzh Link to comment Share on other sites More sharing options...
Recommended Posts