Tech Inferno Fan Posted January 15, 2016 Share Posted January 15, 2016 9 minutes ago, esatamod said: Thanks for reply! So is the issue a Clover UEFI thing or just a UEFI thing? I'm thinking about trying chameleon or chimera instead of clover if it might help make this work. I can't say if Chameleon or Chimera would fare any better as haven't tested those bootloaders with Setup 1.30. Link to comment Share on other sites More sharing options...
esatamod Posted January 16, 2016 Share Posted January 16, 2016 So you're saying there's a chance! As long as I'm not using a UEFI module? Link to comment Share on other sites More sharing options...
MrSirPenguin Posted January 20, 2016 Share Posted January 20, 2016 Hello everyone, New member of techinferno and new user of eGPU solutions. I'm trying to use an eGPU solution and am having, what I believe to be, a whitelist issue. Through fairly random trial and error with the anti-whitelisting capabilities in setup 1.30 I have gone from my eGPU not being detected at all to my computer booting up while using the eGPU to display to my external monitor. However, it immediately hangs on the first image of "Toshiba: Leading Innovation," and has multiple white horizontal lines all over the screen. I'm continually troubleshooting and have yet to find any way of getting my setup to work. Here are a few methods I've tried using to fix my setup. Booting up with a delay: If I use the delay switches on the adapter, the computer boots up fine on the internal display, but neither Setup 1.30 nor Windows will detect my eGPU Booting with wifi card inserted, sleeping computer, replacing wifi with eGPU, resuming: This causes my computer to have several false startups and then finally it resumes windows without any sign of a different device being present other than a lack of wifi capabilities Booting with wifi card inserted, using '!Save' on the mPCIe port in Setup 1.30, rebooting without wifi card, hotplugging eGPU: Any attempts at hotplugging my eGPU yield the same result but this method has the most thought and reason behind it. Still, hotplugging my powered eGPU causes my laptop's fan to go crazy and the screen to go blank before dying and abruptly shutting down. I would greatly appreciate any advice and/or feedback you all may have. My setup specs are below. Make: Toshiba Model: P850 CPU: i5 3210M 2.5GHz RAM: 8GB OS: Windows 8.1 connection type: mPCIe Adapter: BPlus PE4C V3.0 GPU: MSI GeForce GTX 570 Twin Frozr II PSU: EVGA 430W Link to comment Share on other sites More sharing options...
AeroStar Posted January 22, 2016 Share Posted January 22, 2016 I would just like to add as a tip (this worked for me) for people who's cards aren't getting detected: I went into my BIOS and enable the password on boot setting, so I have to enter a simple password when starting up. For some reason this allows my eGPU to successfully get detected and running, and it works on my system, which is UEFI based running Windows 10. Using F8 to pause startup doesn't work at all for me but this did. Hope it helps someone! Link to comment Share on other sites More sharing options...
killem2 Posted January 29, 2016 Share Posted January 29, 2016 I am seriously not happy. And I'd prefer to hear from some one in addition to nando please. My setup: zbook 15, akitio box, 500 watt psu, and a GTX960 4gb . (EVGA). Thunderbolt 2 Windows 10. I was advised that since it was in the same family it'll be PnP. I validated that a 970 works after the advise from nando was to get a different card because my 760 apparently has a different architecture. Fine whatever, I saved up, bought a 960 after Nando said it would work. Got it setup, followed the same setups he gave me, of just using Setup 1.3 to disable the Dgpu, and it detects it, it sees it, it installs the drivers for it. ERROR 12. Again. Worse yet, when I boot up with the TB2 cord plugged in, it doesn't get to windows. It either blue screens or it hangs on the windows screen. If I hot swap it, it disables my freaking WIFI and all my USB ports. So how this is suppose to give me the same results as the 970 which was a sweet and effortless plug-in-play I don't know. Link to comment Share on other sites More sharing options...
Bndka Posted January 29, 2016 Share Posted January 29, 2016 Hello, I buy the setup 1.30. It works with my Lenovo W540, and GTX460 eGPU, with windows 10. My laptop has a quadro k1100m, and the extended display setting is working too. Thanks for this program. 1 Link to comment Share on other sites More sharing options...
AstralSparks Posted January 31, 2016 Share Posted January 31, 2016 On 1/29/2016 at 0:26 PM, killem2 said: I am seriously not happy. And I'd prefer to hear from some one in addition to nando please. My setup: zbook 15, akitio box, 500 watt psu, and a GTX960 4gb . (EVGA). Thunderbolt 2 Windows 10. I was advised that since it was in the same family it'll be PnP. I validated that a 970 works after the advise from nando was to get a different card because my 760 apparently has a different architecture. Fine whatever, I saved up, bought a 960 after Nando said it would work. Got it setup, followed the same setups he gave me, of just using Setup 1.3 to disable the Dgpu, and it detects it, it sees it, it installs the drivers for it. ERROR 12. Again. Worse yet, when I boot up with the TB2 cord plugged in, it doesn't get to windows. It either blue screens or it hangs on the windows screen. If I hot swap it, it disables my freaking WIFI and all my USB ports. So how this is suppose to give me the same results as the 970 which was a sweet and effortless plug-in-play I don't know. AFAIK error 12 means not enough memory resource, have u tried DSDT override? hope this help Link to comment Share on other sites More sharing options...
Ghostern Posted February 4, 2016 Share Posted February 4, 2016 (edited) Hello everybody! I have hm 87 chipset (clevo w370ss) and exp gdc beast mPCI-e, can i set x2 gen2 in egpu set up 1.30? (i disabled port 2 and port 4, my egpu works on port 3 and port 1 is empty) Edited February 4, 2016 by Ghostern Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted February 6, 2016 Share Posted February 6, 2016 On 03/02/2016 at 3:14 AM, Ghostern said: Hello everybody! I have hm 87 chipset (clevo w370ss) and exp gdc beast mPCI-e, can i set x2 gen2 in egpu set up 1.30? (i disabled port 2 and port 4, my egpu works on port 3 and port 1 is empty) Unfortunately, your system doesn't have a x2 capable port layout. Though even if it did, unlocking x2 capability would require a not-for-the-feint hearted bios mod. Intel locking that down as of the 2nd gen icore chipsets. My suggestion is if you require more than x1 2.0 bandwidth then acquire a Thunderbolt equipped notebook and egpu enclosure. Link to comment Share on other sites More sharing options...
ODINO92 Posted February 15, 2016 Share Posted February 15, 2016 I've bought the EXP GDC v8.3 I've connected all to my pc but the pc not recognize the GPU. So I've found the software setup 1.30 and I've these questions I've dual boot on my pc with Windows 7 and opensuse 13.2 can I use setup 1.30 anyway? My pc is MYSN c703 (known as MSI gs70) can I use Setup 1.30? thanks for the help Link to comment Share on other sites More sharing options...
Tech Inferno Fan Posted February 15, 2016 Share Posted February 15, 2016 6 minutes ago, ODINO92 said: I've bought the EXP GDC v8.3 I've connected all to my pc but the pc not recognize the GPU. So I've found the software setup 1.30 and I've these questions I've dual boot on my pc with Windows 7 and opensuse 13.2 can I use setup 1.30 anyway? My pc is MYSN c703 (known as MSI gs70) can I use Setup 1.30? thanks for the help Yes, Setup 1.30 can be installed on your system and used for the purposes outlined in the opening post of this thread. 1 Link to comment Share on other sites More sharing options...
fridgeee Posted February 21, 2016 Share Posted February 21, 2016 Hello Everyone, I have a serious problem with my EGPU: my setup: Lenovo t420s i5 2520m 8gb ram intel hd 3000 windows 7 64bit professional egpu: ATX PSU 460W PE4c V3.0 (Express Card) Nvidia GT 430 I installed the egpu via express card, and fixed the error 12 with the setup 1.30. Everything worked fine, until my laptop stopped working. After a restart, setup 1.30 and the DM(Device manager) cant find my graphic card. i tried everything... I tried every combination with the sw1 and sw2 switch. Sometimes when sw2 is on 2-3 and sw1 is on 1 or 2 my system is like super slow, like everything works in 1s steps. and even than the DM cant find the graphic card. I switch the Egpu to force pwr on, nothing changes. I switch the EC in Bios from automatic to generation 1, no results. I set up a start up passwort, no results. I plugged the EC in the laptop before/after/during start up and win 7 logo. I would change the jumpers, but i dont know how, there is no manual. I spend hours to find a solution. somehow i cant upload the pictures, but D2 and D3 are alway green when the EC is plugged in the Laptop. Thank you very much Link to comment Share on other sites More sharing options...
HellOrc Posted March 4, 2016 Share Posted March 4, 2016 Anyone can help me? I purchased a Beast EXP GDC eGPU dock and now I'm trying to make this work. I'm having problems when I try to Run Compaction, it isn't showing solution for me, images in https://imgur.com/a/ARMaO My setup is Sony Vaio SVS15115FBB Core I7 3520M Intel HD Graphics 4000 Nvidia GT640M 1G 8Gb RAM Beast eGPU EXP GDC v8.3 mPCI-e Please, help me Link to comment Share on other sites More sharing options...
radz_2001 Posted March 4, 2016 Share Posted March 4, 2016 Hello, I'm thinking about buying the dell xps 15 l502x. I want to add a egpu to it, I was thinking gtx 750ti. What configuration would I need to go through if i replace the graphics card with the wifi card? Would I need to use the 1.30 configiration? Specs: i7 2ghz 8gb ddr3 1333mhz gt 540m Link to comment Share on other sites More sharing options...
radz_2001 Posted March 4, 2016 Share Posted March 4, 2016 Hello, I'm thinking about buying the dell xps 15 l502x. I want to add a egpu to it, I was thinking gtx 750ti. What configuration would I need to go through if i replace the graphics card with the wifi card? Would I need to use the 1.30 configiration? Specs: i7 2ghz 8gb ddr3 1333mhz gt 540m Link to comment Share on other sites More sharing options...
fatony Posted March 5, 2016 Share Posted March 5, 2016 Please Help, I'm sorry my English very bad. I'm try install EGPU Gtx 750ti on my Hp 8470p with PE4C v2.0, with Express Card slot, when I connect cable converter, and on it, internal display off, and the external display monitor don't on, if I try with my dell e6220, EGPU work very good and stable. Link to comment Share on other sites More sharing options...
Legato Posted March 6, 2016 Share Posted March 6, 2016 (edited) Do anyone know a solution for this problem I am facing at the moment? Before restoring Port 4, I saved it with WiFi card in the PCI slot, and everything I do in the video worked 1 time without freezing at the very end (with eGPU inserted and no swapping done). -------------------------------------------------- OS: Windows 10 x64 Model: Acer Aspire V3-572PG Adapter: EXP GDC eGPU: Gigabyte GeForce GTX 970 Dedicated: GeForce 840m RAM: 8GB ------------------------------------------------- Actual steps in the video: Enable P4 (port 4, with eGPU) Load P4. (After this step, refreshing with F5 succesfully given me recognition of eGPU as Nvidia in P4) Thanks for any opinions in advance Edited March 6, 2016 by Legato Included hardware info Link to comment Share on other sites More sharing options...
unixz Posted March 6, 2016 Share Posted March 6, 2016 Hi Nando, I have been struggling with these for days and so I give up figuring out on my own and seek your help. My system is Lenovo Y450 GT130 version Win8.1 Ram 6GB PE4L 2.1b What I have done is DSDT Override (Large Memory) The problem: 1. When boot with EGPU attached, the system say Error 31. I guess its the driver false. So I install nvidia driver. 2. Then I boot it again with EGPU attached and the driver, it shows blue screen. 3. Maybe it because I didnt do the PCI compaction thing. So i tried and it didn't get pass to the windows. It endup with blackscreen with cursor. If I remember correctly If changes like demoted dgpu then run compaction it get stuck on gathering system detail and never finish. I also attach the diag.zip diag (1).zip Link to comment Share on other sites More sharing options...
speedrohan Posted March 6, 2016 Share Posted March 6, 2016 egpu menu my PCI confinguraton menu has lost i also put it in usb its not read from usb but its read from drive c instead so do you know how to fix it? http://prntscr.com/abxrhq Disabled PCI confinguraton menu in Setup to allow iport functionality. how can i open this function ? http://prntscr.com/abxrsp http://prntscr.com/abxs4b Link to comment Share on other sites More sharing options...
Alberth-OC Posted March 6, 2016 Share Posted March 6, 2016 (edited) Hello Nando, I have a problem with SETUP. I'm using Windows 10 x64 now as my primary OS, but I'm running into a problem in finalizing the SETUP. When I try to mount the image in the setup-disk-image it is giving the following error: Quote ************************************************** BIG WARNING!! mkdevcon: PCI BUS section NOT found ************************************************** If you are using a non-English language, then please edit the following: v:\config\devcon.txt and remove the "PCI BUS" section that will be in another language. Otherwise the addresses referred to in that section will be such that the the complete PCI BUS will be excluded during compaction and compaction will find no solutions (fail). You could tell me what is the problem? I've tried unmount the image and redo the process, but the error persists. Hugs! Edited March 6, 2016 by Alberth-OC Link to comment Share on other sites More sharing options...
hlgyrms Posted March 8, 2016 Share Posted March 8, 2016 (edited) hello @Tech Inferno Fan, pls check your email for some infomations. i remitted with paypal. pls send me the egpu setup 1.3 Edited March 9, 2016 by hlgyrms Link to comment Share on other sites More sharing options...
Kenenna Posted March 8, 2016 Share Posted March 8, 2016 Hey @Tech Inferno Fan please can you send me the Setup 1.3?? I finally got my DSDT override working after going down to Windows 7. I tried to follow that link but it was listed as private. Also replied the mail you sent me with the original link. Thanks Link to comment Share on other sites More sharing options...
ded Posted March 9, 2016 Share Posted March 9, 2016 (edited) Hi @Tech Inferno Fan I sent payment via paypal a couple days ago, along with an email. However, I have not received any replies. I have double checked my spam folder. When will I receive setup 1.3? Thanks. Edited March 9, 2016 by ded Link to comment Share on other sites More sharing options...
Founder Brian Posted March 9, 2016 Founder Share Posted March 9, 2016 On 3/8/2016 at 5:54 PM, hlgyrms said: hello @Tech Inferno Fan, pls check your email for some infomations. i remitted with paypal. pls send me the egpu setup 1.3 22 hours ago, Kenenna said: Hey @Tech Inferno Fan please can you send me the Setup 1.3?? I finally got my DSDT override working after going down to Windows 7. I tried to follow that link but it was listed as private. Also replied the mail you sent me with the original link. Thanks 43 minutes ago, ded said: Hi @Tech Inferno Fan I sent payment via paypal a couple days ago, along with an email. However, I have not received any replies. I have double checked my spam folder. When will I receive setup 1.3? Thanks. I'm sure @Tech Inferno Fan will take care of this as soon as he gets a chance. Link to comment Share on other sites More sharing options...
byobr Posted March 9, 2016 Share Posted March 9, 2016 @Tech Inferno Fan pls check your inbox, i've been trying to talk to you for days, already donated, please send the setup. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts